Instruction/ maintenance manual of the product MIC-3081 Advantech
Go to page of 19
Advantech CompactPCI ™ Modular Industrial Computer MIC - 3081 10U high 8 - slot enclosure with CT bus and rear I/O for CompactPCI™ backplane.
MIC - 3081 User M anual --- Page II Copyright Notice Th is document is copyrighted, 200 3 . All rights are reserved. The ori ginal manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
MIC - 3081 User M anual --- Page III Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for one year from the date of purchase.
MIC - 3081 User M anual --- Page IV Packing List Before installation, ensure that the following materials have been received: • One MIC - 3081 CompactPCI ™ enclosure with backplane • One box of .
MIC - 3081 User M anual --- Page V Contents 1. General Information.................. .......... ..................... ..................... 1 1.1 Introduction ................................... ... ........................................... 2 1.2 Features.
MIC - 3081 User M anual --- Page VI.
MIC - 3081 User M anual --- Page 1 1 General Information.
MIC - 3081 User M anual --- Page 2 1.1 Introduction The MIC - 3081 series CompactPCI is a 10U - high enclosure with eight CompactPCI slots for rack mounting, which is provided as a flexible, configurable development platform. It supports 8 - slot backplane H.
MIC - 3081 User M anual --- Page 3 backplane may be configured for +3.3V or +5V V(I/O) CompactPCI de vice support. A short - bar is provided on the backplane to select the desired V(I/O) voltage. The eight rear I/O are provided directly behind the backplane for IEEE1101.
MIC - 3081 User M anual --- Page 4 PICMG 2.1, R2.0 CompactPCI Hot - Swap specifications PICMG 2.5, R1.0 CompactPCI Computer Telephony specification 1.3. 2 MIC - 3081A/8 - 10R 560W N+1 redundant ATX MIC - 3921 & MIC - 3081B/8 - 10R 560W N+1 redu ndant ATX MIC - 3924A • Output: 560 W (N+1 redundant) ATX* • Max.
MIC - 3081 User M anual --- Page 5 1. 4 Dimensions.
MIC - 3081 User M anual --- Page 6 2 Installation.
MIC - 3081 User M anual --- Page 7 2.1 Initial Inspection We have carefully inspected the MIC - 3081 mechanically and electrically before shipping. It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the MIC - 3081, check it for signs of shipping damage (damaged box, scratches, dents, etc.
MIC - 3081 User M anual --- Page 8 Figure 2 - 2: Rear view of MIC - 3081 A (with advance intelligent alarm module) 2.3 Installation Procedures 2.3.1 Card Installation and Removal The CompactPCI ™ connectors are firm and rigid, and require careful handling while plugging and unplugging.
MIC - 3081 User M anual --- Page 9 chassis: To install a card: 1. Hold the card vertically. Be sure that the card is oriented correctly. The components of the card should be pointing to the right - hand side. 2. Be sure that the handles of the card are not la tched.
MIC - 3081 User M anual --- Page 10 To remove a card: 1. Unscrew the screws on the card front panel. Release the locking latches on the handles. 2. Lift the upper handle up and press the lower handle down to release the card from the backplane. 3. Slide the card out.
MIC - 3081 User M anual --- Page 11 Figure 2 - 4: Attaching the mounting brackets to a 5.25" device 2. Unfasten and remove the cover plate of the device tray.
MIC - 3081 User M anual --- Page 12 Figure 2 - 5: Attaching the mounting brackets to a 3.5" floppy disk d rive Figure 2 - 5: Recommended device bay configuration 1x 3.
MIC - 3081 User M anual --- Page 13 2.3.6 Replacing the Hot - swap Fan and Air Filter The MIC - 3081 provides t wo hot - swap fans underneath the card slots and two blowers on the top . Each fan /blower can be individually replaced. This can be done without turning off the system power or inter rupting system operation.
An important point after buying a device Advantech MIC-3081 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advantech MIC-3081 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advantech MIC-3081 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advantech MIC-3081 you will learn all the available features of the product, as well as information on its operation. The information that you get Advantech MIC-3081 will certainly help you make a decision on the purchase.
If you already are a holder of Advantech MIC-3081, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advantech MIC-3081.
However, one of the most important roles played by the user manual is to help in solving problems with Advantech MIC-3081. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advantech MIC-3081 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
