Instruction/ maintenance manual of the product PW2002 Campbell Hausfeld
Go to page of 20
BUILT TO LAST Gasoline Power ed Pr essur e W ashers Product Manual PW2002 and PW2102 Carefully read and understand these instructions before operating your pressure washer . © 2007 Campbell Hausfeld/Scott Fetzer IN466900A V 5/07 Frequently Asked Questions .
Pressur e W ashers www .chpower .com Fr equently Asked Questions How do I start my pr essure washer? 1. Make sure you have gas and oil in the engine. 2. T urn the water on, then trigger the gun to make sure the water will flow smoothly out of the nozzle.
• Always engage the trigger safety latch in the safe position when spraying is stopped even if only for a few moments. • Always follow detergent manufacturer’ s label recommendations for proper use of detergents. Always protect eyes, skin, and respiratory system from detergent use.
2. a. For model PW2002: Attach wire holders to handle and frame as shown in figure 2 using a 3/8" or adjustable wrench. b. For model PW2102: Attach detergent tank to backside of handle. Use the 4 hex bolts with flat washer under hex head and 4 nuts provided.
TRIGGER SAFETY LA TCH In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally . Push the latch fully down to engage it (See Figure 10 and 11). Always engage the trigger safety latch when the unit is not in use.
The following cleaning procedure will help you organize your cleaning task and ensures that you will achieve the best results in the shortest amount of time. Remember to use the spraying / cleaning techniques mentioned in the following section. Before starting a pressure washer cleaning job, prepare the surface you intend to clean.
Pressur e W ashers Spray the cleaning surface with water to clear off any dirt or grime that may have collected on the surface. Doing so allows the detergent to attack the deep down dirt that has worked its way into the cleaning surface.
www .chpower .com Pressur e W ashers Operation (Continued) TURBO LANCE (NOT INCLUDED WITH ALL MODELS) A turbo lance is equipped with a permanently attached nozzle . This nozzle, sometimes referred to as a rotary nozzle, can significantly reduce cleaning time.
Pressur e W ashers 9 Operation (Continued) 2. The easiest way to regulate the cleaning power of your pressure washer is by changing the distance from the surface you are cleaning. Begin spraying with a wide fan pattern while standing several feet from the surface.
10 Pressur e W ashers Observe regular maintenance intervals to ensure maximum performance and life from the pressure washer . Refer to the schedule for recommended maintenance. If you operate the pressure washer in dusty conditions, perform maintenance checks more often.
11 Pressur e W ashers Maintenance (Continued) Service Recor d Date Maintenance performed Replacement components requir ed www .chpower .com.
12 Pressur e W ashers Ref. Part Kit Part or Kit Qty per No. Description Name Number Kit For Replacement Parts, Call 1-800-330-0712 Please provide following information: - Model number - Serial number .
Pressur e W ashers 13 Replacement Parts List — V ertical Shaft Pressur e W asher Ref Description Product PW2002 PW2102 No. Number QTY QTY 1 Handle tube, no tank PM345104BH 1 -- 2 * 1/4” - 20 bolt .
Pressur e W ashers 14 www .chpower .com High Pressur e Soap Lance Safety Section This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. T o help recognize this information, observe the following symbols.
Pressur e W ashers 15 1 Injector Lance PM268500A V 1 2 Lance T ank PM268012A V 1 3 O-ring MJ106515A V 1 4 Suction T ube PM268405A V 1 5 Inner Cap PM268302AV 1 6 Outer Cap PM268312A V 1 7 Screw MJ10610.
Pressur e W ashers T roubleshooting Chart - Gasoline Power ed Pressur e W ashers Only Symptom Possible Cause(s) Corrective Action(s) Engine will not start or is hard to start Engine misses or lacks po.
Pressur e W ashers 17 T roubleshooting Chart - Gasoline Power ed Pressur e W ashers Only (Continued) Symptom Possible Cause(s) Corrective Action(s) Pressure drops after period of normal use Pump noisy / pump runs rough Pressure washer will not spray detergent 1.
Pressur e W ashers 18 www .chpower .com Notes.
Pressur e W ashers 19 www .chpower .com Notes.
Pressur e W ashers Limited W arranty 1. DURA TION: From the date of purchase by the original purchaser as follows: One Y ear 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company , 100 Production Drive, Harrison, OH 45030, T elephone: (800) 330-0712 3.
An important point after buying a device Campbell Hausfeld PW2002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld PW2002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld PW2002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld PW2002 you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld PW2002 will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld PW2002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld PW2002.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld PW2002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld PW2002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
