Instruction/ maintenance manual of the product NB0050 Campbell Hausfeld
Go to page of 8
properly. Do not use a compressed air source capable of more than 200 PSI. The nailer could explode and cause death or serious personal injury. ● Never use gasoline or other flammable liq- uids to clean the nail- er. Never use the nail- er in the presence of flammable liquids or gases.
Model NB0050 2 Operating Instructions W ar ning Continued ● Never place your hand or any part of your body in the nail dis- charge area of the nailer. It is possible for the nailer to eject a fastener and could result in death or serious personal injury.
Model NB0050 SINGLE CYCLE MODE This method is rec- ommended when precise nail place- ment is required. The single cycle pin must be installed in the nailer. This mode requires the trigger to be pulled each time a nail is driven. The nailer can be actuated by depressing the WCE against the work surface followed by pulling the trigger.
Model NB0050 4 Operating Instructions Each time the Work Contact Element (WCE) is depressed, a nail is driven into the work surface. Care should be taken when using this method because a nail will be driven when the WCE is depressed by any surface.
T echnical Support Should you have any questions regard- ing the operation or repair of this nail- er, please call our Nailer Hotline at 1-800-543-6400 for assistance. If you are calling from Ohio or outside of the continental United States, please call collect, 1-513-367-1182.
Model NB0050 Operating Instructions 6 Air leaking at trigger valve Air leaking between hous- ing and nose Air leaking between hous- ing and cap Nailer skips driving nail Nailer runs slow or has loss o.
Model NB0050 7 Operating Instructions Limited W arranty 1. DURATION: One year from the date of purchase by the original purchaser. 2. WHO GIVES THIS WARRANTY (WARRANTOR): The Campbell Group A Scott Fetzer Company 100 Production Drive Harrison, Ohio, 45030 Telephone: 1-800-543-6400.
Operating Instructions NB0050 Notes 8.
An important point after buying a device Campbell Hausfeld NB0050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld NB0050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld NB0050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld NB0050 you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld NB0050 will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld NB0050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld NB0050.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld NB0050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld NB0050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
