Instruction/ maintenance manual of the product T1-FT1 CSU ADTRAN
Go to page of 2
Product Features ■ Real-time measurement of throughput, bandwidth utilization, bursting, congestion, and network delay on each PVC ■ Bandwidth utilization by protocol and top talkers ■ End-to-en.
Specifications subject to change without notice. ADTRAN is a trademark of ADTRAN, Inc. All registered trademarks and trademarks mentioned in this publication are the property of their respective owners.
An important point after buying a device ADTRAN T1-FT1 CSU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADTRAN T1-FT1 CSU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADTRAN T1-FT1 CSU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADTRAN T1-FT1 CSU you will learn all the available features of the product, as well as information on its operation. The information that you get ADTRAN T1-FT1 CSU will certainly help you make a decision on the purchase.
If you already are a holder of ADTRAN T1-FT1 CSU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADTRAN T1-FT1 CSU.
However, one of the most important roles played by the user manual is to help in solving problems with ADTRAN T1-FT1 CSU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADTRAN T1-FT1 CSU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
