Instruction/ maintenance manual of the product DG420700CK Campbell Hausfeld
Go to page of 8
Operating Instructions and Parts Manual DG420700CK Recipr ocating Saw Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
DG420700CK Notas Length of Cord in Feet 25 50 100 150 AWG Size of Cord 18 18 18 16 Minimum Wire Size (AWG) of Extension Cord for Reciprocating Saw Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Para instalar la hoja de corte: 1. Asegúrese de que la sierra esté completamente desconectada de la fuente de energía antes de instalar la hoja. 2. Coloque el eje de movimiento alternativo en la po.
4 8. Resume normal operation. Before plugging in power cord, always pull on the blade to make sure it is securely locked in the clamp. Failure to do so may result in serious injury. Operation Power Switch: To start saw, push in power switch lock and then squeeze Power Switch with finger.
Do not overreach. Keep prop- er footing and balance at all times. This enables better control of the power tool in unexpect- ed situations. Dress properly. Do not wear loose clothing or jew- ellery. Keep your hair, clothing and gloves away from moving parts.
6F r Description Ces scies sont conçues pour les utilisations de service robuste, comme tailler les branches d’arbres. Dans certains cas, elles peuvent être utilisées pour couper un matériau métallique. Il faut se familiariser avec les composants principaux de cet outil avant de l’utiliser.
Garantie Limitée 1. DURÉE: À partir de la date d’achat par l’acheteur original comme suit - Deux Ans 2. GARANTIE ACCORDÉE PAR (GARANT): Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone: (800) 543-6400 3.
il y aura de chance de grippage et de RECUL. Avant la coupe, s’assurer que les ajustements de profondeur et de biseau sont serrés. 9. Attention au matériau dense, noueux, humide ou déformé. Ils sont les plus susceptibles de créer des conditions de pincement et des RECULS possibles.
An important point after buying a device Campbell Hausfeld DG420700CK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld DG420700CK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld DG420700CK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld DG420700CK you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld DG420700CK will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld DG420700CK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld DG420700CK.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld DG420700CK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld DG420700CK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
