Instruction/ maintenance manual of the product BT300 Ryobi
Go to page of 10
W ARNING: T o reduce the risk of injur y , the user must read and understand the operator's man ual bef ore using this product. OPERA T OR'S MANU AL WIDE T ABLE KIT 4730300 FOR USE WITH R Y .
2 Introduction ....................................................................................................................................................................... 2 Rules For Saf e Operation ................................
3 SYMBOLS SA VE THESE INSTR UCTIONS The pur pose of safety symbols is to attract y our attention to possib le dangers. The saf ety symbols, and the explanations with them, deserve y our careful attention and understanding. The safety w ar nings do not by themselves eliminate any danger .
4 LOOSE P AR TS Fig. 1 T -NUT HEX BOL T SQUARE HEAD BOL T W ASHER HEX BOL T W ASHER HEX NUT REAR EXTENSION RAIL CONNECTOR T ABLE BRACKET WOOD SCREW SP ACER FRONT EXTENSION RAIL T able Brac ket ..........................................................
5 ASSEMBL Y Fig. 2 Fig. 3 CONNECTOR T ABLE BRACKET FRONT EXTENSION RAIL W ASHER T -NUT HEX BOL T FRONT RAILS SHOWN A TT ACHED REAR RAILS SHOWN A TT ACHED CONNECTOR T -NUT W ASHER HEX BOL T T ABLE BRACKET SP ACER REAR EXTENSION RAIL T O A TT A CH FRONT EXTENSION RAIL See Figures 2 and 4.
6 ASSEMBL Y Fig. 6 Fig. 5 Fig. 4 Fig. 7 T O A TT A CH T ABLE BRACKETS Slide two T -nuts into channel on rear por tion of front e xtension rail. See Figures 2 and 4. Attach two table brac kets and secure with w ashers (5/16 in.) and he x bolts (5/16 in.
7 ASSEMBL Y Fig. 9 Fig. 8 T ABLE LEGS (not supplied) See Figure 8. T able legs can be made from either 2 x 4s or b y purchasing a Ryobi Leg Set, #4730305, depending upon the application in which y our saw is being used.
8 ASSEMBL Y Fig. 10 Fig. 11 REAR EXTENSION RAIL SQUARE HEAD BOL T (1/4-20X1/2 IN.) T ABLE BRACKET W ASHER (1/4 IN.) HEX NUT (1/4 IN.) REAR EXTENSION T ABLE AUXILIAR Y EXTENSION T ABLE OPTIONAL BRACE O.
9 Now that you ha ve purchased y our Wide T able Kit , should a need e ver exist f or repair par ts or ser vice , simply contact your nearest Ryobi Authorized Ser vice Center . Be sure to provide all per tinent f acts when you call or visit. R Y OBI WIDE T ABLE KIT NO .
10 R Y OBI TECHNOLOGIES, INC. 1428 P ear man Dairy Road Anderson, SC 29625 P ost Ofce Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www .r y obitools.
An important point after buying a device Ryobi BT300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi BT300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi BT300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi BT300 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi BT300 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi BT300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi BT300.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi BT300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi BT300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
