Instruction/ maintenance manual of the product AL1860 - METAL Campbell Hausfeld
Go to page of 16
Spray Guns for Airless Paint Sprayers Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
2 Operating Instructions and Replacement Parts List Description Airless paint sprayers are capable of spraying a wide variety of latex, oil- based, and alkyd paints, as well as stains, preservatives and other non- abrasive finishes.
Spray Guns for Airless Paint Sprayers 3 General Safety Information (Cont.) NOTE: If gun sprays while in the locked position follow instructions in Maintenance section for trigger lock. 12. Verify that all connections are secure before operating. Do not use pliers to tighten or loosen high pressure connections.
Operating Instructions and Replacement Parts List Spraying Instructions (Cont.) 2. Point gun in a safe direction and spray. This should clear tip of any blockage. 3 . Rotate the tip back to the spray posi- tion and continue spraying (See Fig. 5). 4. If clogging continues, replace gun filter and consider straining the paint prior to use.
Operating Instructions and Replacement Parts List Limited Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: All Paint Application Accessories - 1 year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld/A Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: 1-800-626-4401.
® Pistolets V aporisateurs pour Pulvérisateurs de Peintur e Sans Air S’il vous plaît lire et conserver ces instructions. Lire attentivement avant de monter, installer, utiliser ou de procéder à l’entretien du produit décrit.
7F r Pistolets V aporisateurs pour Pulvérisateurs de Peintur e Sans Air Description Les pulvérisateurs de peinture sans air peuvent pulvériser une variété de pein- tures latex, à base d’huile et alkyd, ainsi que les teintures, préservatifs et autres finis non-abrasifs.
8F r Généralités Sur La Sécurité (Suite) • Pour verrouiller (engager) : tourner les languettes de verrouil- lage en position horizontale. •Pour déverrouiller (désengager) pour pulvériser : tourner les languettes de verrouillage en posi- tion verticale.
9F r Pistolets V aporisateurs pour Pulvérisateurs de Peintur e Sans Air Instructions de Pulvérisation (Suite) boîte de dissolvant convenable (Voir Figure 4).
10 Fr Instructions d’Utilisation et Liste de Pièces de Rechange Garantie Limitée 1. DURÉE: À partir de la date d’achat par l’acheteur original comme suit - Tous les Accessoires pour Application de Peinture - 1 An.
Pistolas Para Rociadoras de Pintura Sin Air e Sírvase leer y guardar estas instrucciones. Lea con cuidado antes de tratar de armar, instalar, manejar o darle servicio al producto descrito en este manual. Protéjase Ud. y a los demás observando todas las reglas de seguridad.
12 Sp Manual de Instrucciones y Lista de Repuestos Descripción las rociadoras de pintura sin aire están diseñadas para rociar una gran varie- dad de pinturas látex, a base de aceite y alquidas, al igual que tinturas, preser- vativos y otros materiales no abrasivos.
13 Sp Informaciones Generales de Seguridad (Cont.) 10.Esta pistola rociadora está clasificada para 205 bar (3000 psi). No la utilice en sistemas diseñados para producir más de 205 bar (3000 psi). 11.Siempre trabe el seguro del gatillo cuando no esté pulverizando.
Manual de Instrucciones y Lista de Repuestos Instrucciones para rociar (Cont.) 4. Conecte el accesorio de rodillo (AL2275 se muestra) en la pistola roci- adora sin aire. Si es necesario, use un adaptador de rosca y una arandela entre el rodillo y la pistola rociadora como se mues- tra en la figura.
Garantía Limitada 1. DURACIÓN: A partir de la fecha de compra por parte del comprador original, es como sigue: Todos los accesorios de apli- cación de pintura: 1 año 2. QUIÉN EMITE ESTA GARANTÍA (EL GARANTE): Campbell Hausfeld/Una Empresa Scott Fetzer, 100 Production Drive, Harrison, OH 45030, Teléfono: 1-800-626-4401.
16 Operating Instructions and Replacement Parts List Instructions d’Utilisation et Liste de Pièces de Rechange Manual de Instrucciones y Lista de Repuestos Notes Notes Notas www.
An important point after buying a device Campbell Hausfeld AL1860 - METAL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld AL1860 - METAL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld AL1860 - METAL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld AL1860 - METAL you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld AL1860 - METAL will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld AL1860 - METAL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld AL1860 - METAL.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld AL1860 - METAL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld AL1860 - METAL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
