Instruction/ maintenance manual of the product NetVanta 3200 ADTRAN
Go to page of 27
Application Dra wings: Rout ing across the W AN Revision C Page 1 of 27 Application Drawings Netvanta 3200/3205: Routing across the WAN T-1 Host Router Remote Router Host Switch Remote Switch ` PC ` PC ` PC ` PC ` PC ` PC 10.0.0.1 10.0.0.2 192.168.1.254 192.
Application Dra wings: Rout ing across the W AN Revision C Page 2 of 27 Overview This application drawing s hows how to use NetVanta 3200s or NetVant a 3205s in a scenario where there is a point -to-point T-1 that is used for data.
Application Dra wings: Rout ing across the W AN Revision C Page 3 of 27 Configura tion step s using the w eb interface for NetV ant a 3200/3205 “ Host Ro uter”: 1. Choose "Physical Interfaces " from the left hand side menu options. 2. Choose "eth 0/1" from th e list of physical interfaces displ ayed.
Application Dra wings: Rout ing across the W AN Revision C Page 4 of 27 4. Press the “Appl y ” button. Note: If you choose to ch ange the IP address of Ethernet 0/1, you will need to change the IP address of your works tation to an IP on the same network as Ethernet 0/1 to continue configuring the router.
Application Dra wings: Rout ing across the W AN Revision C Page 5 of 27 7. Checked the box nex t to "Enable"..
Application Dra wings: Rout ing across the W AN Revision C Page 6 of 27 8. Next to “Clocking” choose “ Internal”..
Application Dra wings: Rout ing across the W AN Revision C Page 7 of 27 9. Choose "1" in the first drop down next to "Data DS0s" and "24" in the s econd drop down.
Application Dra wings: Rout ing across the W AN Revision C Page 8 of 27 10. Choose "PPP" next to "Encapsulation"..
Application Dra wings: Rout ing across the W AN Revision C Page 9 of 27 11. Press "Appl y " and new screen wil l appear that is titled "PPP C onfiguration for ppp 1".
Application Dra wings: Rout ing across the W AN Revision C Page 10 of 27 12. Under the "IP Settings" s ection change "Address T y pe" to "Static". 13. Fill in the "IP Address" a nd "Subnet Mask" y ou would lik e to use.
Application Dra wings: Rout ing across the W AN Revision C Page 11 of 27 14. Press "Appl y ". 15. Choose "Route Table" fr om the left hand side menu opti ons.
Application Dra wings: Rout ing across the W AN Revision C Page 12 of 27 16. Fill in 192.168.2.0 for the "Desti nation Address" and 255.255.255.0 for the "Destination Mask". 17. Choose "Address" under "Gateway" and type 10.
Application Dra wings: Rout ing across the W AN Revision C Page 13 of 27 18. Press "Add". 19. Configuration is now do ne and all that left to do is choose "Sav e" in the upper right hand corner.
Application Dra wings: Rout ing across the W AN Revision C Page 14 of 27 Configura tion Scri pt for the Ne tV ant a 3200/3205 “Host Router”: ! ! hostname "HostRouter" enable password adt.
Application Dra wings: Rout ing across the W AN Revision C Page 15 of 27 ! ! ! ! ip route 192.168.2.0 255.255.25 5.0 10.0.0.2 ! no ip n-form agent ip http server no ip http secure-server no ip snmp ag.
Application Dra wings: Rout ing across the W AN Revision C Page 16 of 27 Configura tion step s using the w eb interface for NetV ant a 3200/3205 “ Remote R outer”: 1. Choose "Physical Interfaces " from the left hand side menu options. 2.
Application Dra wings: Rout ing across the W AN Revision C Page 17 of 27 4. Press the “Appl y ” button. Note: If you choose to ch ange the IP address of Ethernet 0/1, you will need to change the IP address of your works tation to an IP on the same network as Ethernet 0/1 to continue configuring the router.
Application Dra wings: Rout ing across the W AN Revision C Page 18 of 27 7. Check the box nex t to "Enable", to enable the interface..
Application Dra wings: Rout ing across the W AN Revision C Page 19 of 27 8. Select "1" in the “Data DS0 s” drop down list and "24" in the second drop d own.
Application Dra wings: Rout ing across the W AN Revision C Page 20 of 27 9. Choose "PPP" from the " Encapsulation" options..
Application Dra wings: Rout ing across the W AN Revision C Page 21 of 27 10. Press "Appl y " and a new screen will appear to configure the PPP i nterface.
Application Dra wings: Rout ing across the W AN Revision C Page 22 of 27 11. Under the "IP Settings" s ection change the "Address T y pe" to "Static". 12. Fill in the "IP Address" a nd "Subnet Mask" y ou would lik e to use.
Application Dra wings: Rout ing across the W AN Revision C Page 23 of 27 13. Press "Appl y ", when done. 14. Choose "Route Table" fr om the left hand side menu opti ons.
Application Dra wings: Rout ing across the W AN Revision C Page 24 of 27 15. Using the information fo r the application drawings example, fill in 0.0.0.0 for the "Destination Address" an d 0.0.0.0 for the "Destination Mask". 16. Choose "Address" under the "Gateway" and type 10.
Application Dra wings: Rout ing across the W AN Revision C Page 25 of 27 17. Press "Add". 18. Configuration is now do ne and all that left to do is choose "Sav e" in the upper right hand corner.
Application Dra wings: Rout ing across the W AN Revision C Page 26 of 27 Configura tion Scri pt for the Ne tV ant a 3200/3205 “Remote R outer”: ! ! hostname "RemoteRouter" enable passwor.
Application Dra wings: Rout ing across the W AN Revision C Page 27 of 27 ! ! ! ! ip route 0.0.0.0 0.0.0.0 10.0.0.1 ! no ip n-form agent ip http server no ip http secure-server no ip snmp agent no ip f.
An important point after buying a device ADTRAN NetVanta 3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADTRAN NetVanta 3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADTRAN NetVanta 3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADTRAN NetVanta 3200 you will learn all the available features of the product, as well as information on its operation. The information that you get ADTRAN NetVanta 3200 will certainly help you make a decision on the purchase.
If you already are a holder of ADTRAN NetVanta 3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADTRAN NetVanta 3200.
However, one of the most important roles played by the user manual is to help in solving problems with ADTRAN NetVanta 3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADTRAN NetVanta 3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
