Instruction/ maintenance manual of the product Fram King FK372 Buhler
Go to page of 28
.
.
Series 1 Rotary Cutter TABLE OF CONTENTS DESCRIPTION PAGE Warranty ..................................................................... 1 Introduction ................................................................ 2 SAFETY .........................
Series 1 Rotary Cutter 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Series 1 Rotary Cutter 2 INTRODUCTION The Buhler Farm King Series 1 Rotary cutter available in 48” and 60” and is equipped with a 3-point hitch. The 3-point hitch is Buhl er Quick Hitch compatible so it is easy to attach and unhook. 3-point hitch models include a single solid rubber training wheel.
Series 1 Rotary Cutter 3 SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program.
Series 1 Rotary Cutter 4 GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it.
Series 1 Rotary Cutter 5 SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safe ty stands before working beneath it.
Series 1 Rotary Cutter 6 SERIES 1 ROTARY CUTTER SAFETY SIGNS Replace safety sign immediately should it bec ome damaged, torn or illegible. Obtain replacements from your authorized deal er using the part numbers shown.
Series 1 Rotary Cutter 7 ASSEMBLY INSTRUCTIONS 1. Raise the hitch arms (#4) and the hitch supports (#5) from the deck. Remove the bolt holding on the top link (#6). Line up the end holes on the hitch supports with the holes on the outside of the hitch arms where you just removed the bolt.
Series 1 Rotary Cutter 8 OPERATING INSTRUCTIONS 1. Connecting to tractor: All cutters are supplied with a standard 1 3/8" 6-spline yoke on the PTO shaft.
Series 1 Rotary Cutter 9 THEORY OF OPERATIONS.
Series 1 Rotary Cutter 10 MAINTENANCE SERVICING INSTRUCTIONS LUBRICATION 1. Gearbox : The gearbox should be filled with SAE90 oil to the bottom edge of the lower oil plug when shipped. Check this before using the cutter and at regular intervals to see that this oil level is maintained.
Series 1 Rotary Cutter 11.
Series 1 Rotary Cutter 12 4’ & 5’ SERIES 1 ROTARY CUTTER.
Series 1 Rotary Cutter 13 WHEN ORDERING PARTS Always give your dealer the Model, Color and Se rial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
Series 1 Rotary Cutter 14 36 909773 M12 X 1.75 X 25 Hex Bolt 37 909774 Lug Bolt Flat Washer 38 116786 Spacer 1 1/4"ID x 1 3/4"OD x 1/2" 39 84583 1/8" Drive in Grease Fitting 40 812.
Series 1 Rotary Cutter 15 SER 1 ROTARY CUTTER CHAIN KIT SER 1 ROTARY CUTTER - CHAIN KIT ITEM PART # DESCRIPTION 1 25331 Front Chain Holder, 4' (48'' Long) 25313 Front Chain Holder, 5&ap.
Series 1 Rotary Cutter 16 MODEL #410 & #510 SERIES 1 ROTARY CUTTER PTO SHAFT MODEL #410 & #510 (SHEAR PIN) - SERIES 1 ITEM # PART # DESCRIPTION F0879 Shaft Complete 1 907186 Quick Disconnect Y.
Series 1 Rotary Cutter 17 MODEL #410 SERIES 1 ROTARY CUTTER GEARBOX.
Series 1 Rotary Cutter 18 MODEL #410 GEARBOX - SERIES 1 ITEM # PART # DESCRIPTION 814425 Gearbox Assembly 1 909785 Cotter Pin 5 x 45 2 909786 Blade Nut 3 909787 Washer - Blade Hub 4 909788 Blade Hub 5 909789 Shaft - Output 6 909790 Oil Seal 1.56 x 2.215 x 0.
Series 1 Rotary Cutter 19 MODEL #510 ROTARY CUTTER GEARBOX.
Series 1 Rotary Cutter 20 MODEL #510 GEARBOX - SERIES 1 & 2 ITEM # PART # DESCRIPTION 966108 Gearbox Assembly 1 914018 Housing 2 914006 Cap - Input 3 914015 Cap - Output 4 904022 Gear - Output, w/.
Series 1 Rotary Cutter 21 SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit.
NOTES.
NOTES.
.
DIVISION LOCATIONS U.S. WAREHOUSES Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43 rd Street N.
An important point after buying a device Buhler Fram King FK372 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buhler Fram King FK372 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buhler Fram King FK372 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buhler Fram King FK372 you will learn all the available features of the product, as well as information on its operation. The information that you get Buhler Fram King FK372 will certainly help you make a decision on the purchase.
If you already are a holder of Buhler Fram King FK372, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buhler Fram King FK372.
However, one of the most important roles played by the user manual is to help in solving problems with Buhler Fram King FK372. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buhler Fram King FK372 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
