Instruction/ maintenance manual of the product FK348 Buhler
Go to page of 40
.
.
Commercial Snowblower TABLE OF CONTENTS DESCRIPTION PAGE Warranty ...................................................................... 1 Safety Inst ructi ons ....................................................... 2 Safety Signs & Safe ty Sign Loc ations .
Commercial Snowblower 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Commercial Snowblower SAFETY INSTRUCTIONS CAUTION 1. Always review operator’s manual before starting new machine. 2. Do not let inexperienced operator s or children run this equipment. 3. Never service or clean unit while it is running. 4. Do not remove shields.
Commercial Snowblower SNOWBLOWERS This manual is for both Commercial Hydraulic Snowblowers and Commercial PTO Drive Snowblowers. The hydraulic models come in 60”, 66”, 74” and 84” widths. The PTO drive model is only available in an 84” width.
Commercial Snowblower SAFETY SIGNS #1 #3 #3 Replace safety signs immediately should they become damaged, torn or illegible. Obtain replacements from your authorized dealer using the part numbers shown.
Commercial Snowblower OPERATING INSTRUCTIONS 1. HYDRAULIC DRIVE: All snowblower hy draulic blocks are set at the factory for a 2800 - 3000 psi system. Refer to t he section on the hydraulic control block if your system does not fall into this range. 2.
Commercial Snowblower OPERATING INSTRUCTIONS – cont’d. 10. ALL: Chain tension on auger chain s hould be set at 3/8” to 1/2” slack. 11. LUBRICATION: a) ALL: The gear teeth on the c hute control should be periodically lubricated with gun grease.
Commercial Snowblower 7 HYDRAULIC CONTROL BLOCK NON-STALLING-FAN FEATURE: The Hydraulic Snowblower has a unique modulating element that keeps the blower fan from stalling in an overloaded condition.
Commercial Snowblower HYDRAULIC CONTROL BLOCK DRAWING AND PARTS LIST HYD MANIFOLD ASSEMBLY Item # Part # Description 1 905669 Main Block 2 813922 Logic Element 3 X2732 Element Seal Kit 4 813923 Control Valve 5 X2733 Seal Kit 6 813924 No-Load Valve 7 X2734 Seal Kit 8ab 813925 Chute Cont.
Commercial Snowblower 9 ASSEMBLY INSTRUCTIONS 1. SPOUT ASSEMBLY FOR ALL SNOWBL OWERS: Remove two of the grooved spout rollers to mount the discharge spout. Replace the two rollers to hold spout in place. Install the 2 ½” x 8” cylinder on the spout using the pins supplied.
Commercial Snowblower ASSEMBLY INSTRUCTIONS – cont’d. b) Using tape or a bright color ed marking pen, mark on the outer shields the position where the s haft is completely pushed together and the position where you have a 4” overlap.
Commercial Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 4. PTO SHIELD: All PTO snowblow ers are supplied with a PTO shield (#18). To install, remove the tw o rear bolts at the top of the gearbox (#34). Bolt the PTO shield to the gearbox by the hinges using these same bolts.
Commercial Snowblower HYDRAULIC COMMERCIAL SERIES SNOW BLOWER – 22” HOUSING 12.
Commercial Snowblower 13.
Commercial Snowblower 14 WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the expl oded view and tabular listing of the area of interest to exactly identify the required part.
Commercial Snowblower 15 22 905224 Fan Shaft 1 1/2'' x 15 1/4'' 23 22695 Chain Cover 909593 Chain Cover - 66" 24 902407 Skid Plate Weldt 909594 Skid Plate Weldt Lh - 66" .
Commercial Snowblower 16 61 81677 5/8'' Lock Washer (pl) 62 81678 5/8'' BS Flat Washer Std (pl) 63 965821 3/8'' x 1 3/4'' Key 64 905310 3/8'' x 4 1/2&.
Commercial Snowblower HYDRAULIC COMMERCIAL SERIES SNOW BLOWER – 24” HOUSING 17.
Commercial Snowblower 18.
Commercial Snowblower 19 Hyd Commercial Series Snowblow er - 24'' Housing Item # Part # Description 1 905540 Main Body Weldt - 84'' 905538 Main Body Weldt - 74'' 2 905225.
Commercial Snowblower 20 33 905246 3/8'' x 3'' Fan Bolt Weldt 34 81620 1/2'' x 1 1/4'' Hex Bolt (pl) 35 84277 1/2'' x 1 1/2'' Hex Bolt (pl) .
Commercial Snowblower SNOWBLOWER ASSEMBLY 21.
Commercial Snowblower 22 HYD COMMERCIAL SERIES SNOWBLOWER ASSEMBLY Item # Part # Description 1 907412 Wiring Harness - Tractor Half 2 890082 1 1/16 SWFJIC x 1 1/16 MJIC Elbow 90 3 JDF19M7866 HFL Bolt M8 x 20 (10.
Commercial Snowblower PTO COMMERCIAL SERIES SNOWBLOWER – 24 “ HOUSING 23.
Commercial Snowblower 24.
Commercial Snowblower 25 PTO Commercial Series Snowblower - 24'' Housing Item # Part # Description 1 905298 Main Body Weldt 2 905225 Fan Weldt - 24'' 3 905202 Auger Weldt 4 905550 .
Commercial Snowblower 26 41 81637 1/2'' Lock Washer (pl) 42 81636 1/2'' Hex Nut (pl) 43 812086 9/16 MORB x 9/16 MJIC Adaptor Str 44 81638 1/2'' BS Flat Washer Std (pl) 45.
Commercial Snowblower PTO DRIVE COMMERCIAL SNOWBLOWER PTO DRIVE COMMERCIAL SNOWBLOWER Item # Part # Description F0585 Shaft Complete 907987 Tractor Half of PTO (S hear) 907988 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret.
Commercial Snowblower 2 ½” x 8” CYLINDER ASSEMBLY 2 1/2'' x 8'' CYLINDER ASSEMBLY Item # Part # Description 1 24982 Tube Weldment 2 108655 Shaft 1.25 dia x 15.54 Lg 3 23156 2.50 Dia Headplate 4 13109 2.50 Dia Piston 5 13090 Piston Rod Clevis (Cast) 6 82330 2.
Commercial Snowblower PTO DRIVE COMMERCIAL SNOWBLOWER PTO DRIVE COMMERCIAL SNOWBLOWER Item # Part # Description BU50505 Gearbox Complete 1 BU50310 Gearbox Casting Only 2 BU500089-3 Pipe Plug 3 BU50457.
Commercial Snowblower 30 SPECIFICATIONS MODEL B6022HSB-1 B6022HSB-2 B6022HSB-3 B6622HSB-1 B6622HSB-2 B6622HSB-3 B7422HSB-1 B7422HSB-2 B7422HSB-3 B7422HSB-4 B7424HSB-3 B7424HSB-4 B8424HSB-2 B8424HSB-3 .
Commercial Snowblower HYDRAULIC SNOWBLOWER WIRING SCHEMATIC X2572 HYDRAULIC SNOWBLOWER MOTOR REQUIREMENT CHART Category Motor GPM Motor HP @ HP @ Shaft Ty pe Eaton Motor Buhler Cu/in/rev RPM 2000 3000 psi Flange Mtg. Part #'s Part # 12 447 12 18 1.
Commercial Snowblower 32 TROUBLESHOOTING SYMPTOM PROBABLE CAUSE REMEDY D1 Nothing Works Hydraulic Circuit Not Comp lete 1. Hydraulic Valve not engaged 1. Engage valve to full detent 2. 1 or more quick cou plers n ot 2. Fully engage all couplers completely engaged.
Commercial Snowblower 33 SHIPPING BUNDLES QUANTITY REQUIRE D BUNDLE NUMBER DESCRIPTION 60” HYDRAULIC DRIVE W/22” FAN SERIES 1 B6022HSB-1 1 F0324 Spout Assembly 1 F0325 Crate of Parts 1 F5545 Snowb.
Commercial Snowblower 34 SHIPPING BUNDLES – cont’d. 74” HYDRAULIC DRIVE W/22” FAN SERIES 3 B7422HSB-3 1 F0324 Spout Assembly 1 F0325 Crate of Parts 1 F5558 Snowblower 74” HYDRAULIC DRIVE W/2.
NOTES.
.
Buhler Manufacturing “ a partnership” 301 Mountain Street S. Morden MB. R6M 1X7 Ph.: (204) 822 - 4467 Fax: (204) 822 - 6348 www.buhler.com Printed in Canada Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822 - 4467 Fax: (204) 822 - 6348 Allied Division 1201 Regent Ave.
An important point after buying a device Buhler FK348 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buhler FK348 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buhler FK348 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buhler FK348 you will learn all the available features of the product, as well as information on its operation. The information that you get Buhler FK348 will certainly help you make a decision on the purchase.
If you already are a holder of Buhler FK348, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buhler FK348.
However, one of the most important roles played by the user manual is to help in solving problems with Buhler FK348. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buhler FK348 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
