Instruction/ maintenance manual of the product 740, 840, 840G Buhler
Go to page of 28
.
.
740, 840 & 840G Snowblowers TABLE OF CONTENTS DESCRIPTION PAGE Warranty ...................................................................... 1 Safety Instructions & Safety Sign Locati ons ................ 2 Operating In structi ons .........
740, 840 & 840G Snowblowers 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
740, 840 & 840G Snowblowers 2 SNOWBLOWER This manual is for model #740 & #840 snowblowers with an open gear gearbox and for model #840G snowblower, which has a sealed oil bath gearbox. When ordering parts, specify model number and serial number.
740, 840 & 840G Snowblowers 3 OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to t he hitch and pins.
740, 840 & 840G Snowblowers 4 OPERATING INSTRUCTIONS – cont’d . 9. Periodically check all bolts for tightness. The bolt holding on the fan and the bearing bolts are of particular importance. 10. Danger: Always stop blower for servicing or unplugging.
740, 840 & 840G Snowblowers 5 ASSEMBLY INSTRUCTIONS 1. #740: Turn the bottom tube weldments (#9) as shown in drawing and slide them into the sleeve welded to the main body. #840 & #840G: Turn the bottom tubes (#93) as shown in drawing and slide them into the sleeve welded to the main body.
740, 840 & 840G Snowblowers 6 ASSEMBLY INSTRUCTIONS – cont’d. 5. Hydraulic spout swivel: a) Mount the swivel arm (#60) ont o the swivel pin welded to the back corner of the fan housing using a 1" I.D. washer (#29) and a 3/16" x 1 ½” cotter pin (#62).
740, 840 & 840G Snowblowers 7 ASSEMBLY INSTRUCTIONS – cont’d. 8. PTO Shield: All snowblowers are supplied with a PTO shield. Bolt the shield (#74) to the hinges on the top of the gearbox on both the #740 and #840 snowblowers using ¼” x ½” hex bolts, lock washers and hex nuts.
740, 840 & 840G Snowblowers 8 REFILLING GEARBOX WITH OIL: #840G ONLY If the gearbox requires refilling with o il because of repairs to the gearbox, add oil to the level shown in the drawi ng. Check the level regularly using the plug in the lid. The correct leve l is even with the bottom of the plug.
740, 840 & 840G Snowblowers 9 740 & 840 SNOWBLOWERS.
740, 840 & 840G Snowblowers 10.
740, 840 & 840G Snowblowers 11 #840G SNOWBLOWER.
740, 840 & 840G Snowblowers 12.
740, 840 & 840G Snowblowers 13 WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the expl oded view and tabular listing of the area of interest to exactly identify the required part.
740, 840 & 840G Snowblowers 14 32 965816 Bevel Gear - 1 1/4'' Bore 33 965817 Bevel Gear - 1 1/2'' Bore 34 965818 1 1/4'' Bearing w/ Collar 35 961637 Bearing Retainer .
740, 840 & 840G Snowblowers 15 71 960135 PTO Shield Spring 72 87553 1/2" x 1 3/4" Hex Bolt (pl) 73 900712 Skid Pin Weldment 74 965409 PTO Shield (#840G) 965410 PTO Shield (#740 & #84.
740, 840 & 840G Snowblowers 16 840G SNOWBLOWER GEARBOX MODEL #840 G SNOWBLOWER GEARBOX PARTS LIST Item # Part # Description BU50506 Gearbox Complete 1 BU50310 Gearbox Casting Only 2 BU500089-3 Pip.
740, 840 & 840G Snowblowers 17 #740, #840, #840G SNOWBLOWER PTO.
740, 840 & 840G Snowblowers 18 SNOWBLOWER PTO (STANDARD) Item # Part # Description F842 Shaft Complete 936263 Tractor Half of PTO (S hear) 936264 Implement Half of PTO (Clamp Yoke) 1 936277 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret.
740, 840 & 840G Snowblowers 19 SNOWBLOWER PTO (OPTIONAL LONG) Item # Part # Description F844 Shaft Complete 936285 Tractor Half of PTO (Shear) 936280 Implement Half of PTO (Clamp Yoke) 1 936277 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret.
740, 840 & 840G Snowblowers 20 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.0 Dia 3 X2669 Seal Kit 3.5 x 8 CYLINDER ASSEMBLY Item # Part # Description 24803 Cyl Complete 1 24804 Tube Weldt 2 113934 Piston Rod 1.
740, 840 & 840G Snowblowers 21 SHIPPING KIT AND BUNDLE NUMBERS The following is a list of kit numbers fo r this product and the bundle numbers, descriptions, and quantities for each kit.
NOTES.
NOTES.
.
DIVISION LOCATIONS U.S. WAREHOUSES Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43 rd Street N.
An important point after buying a device Buhler 740, 840, 840G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buhler 740, 840, 840G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buhler 740, 840, 840G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buhler 740, 840, 840G you will learn all the available features of the product, as well as information on its operation. The information that you get Buhler 740, 840, 840G will certainly help you make a decision on the purchase.
If you already are a holder of Buhler 740, 840, 840G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buhler 740, 840, 840G.
However, one of the most important roles played by the user manual is to help in solving problems with Buhler 740, 840, 840G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buhler 740, 840, 840G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
