Instruction/ maintenance manual of the product GEN1850 Buffalo Tools
Go to page of 23
2011 01 GEN1850 1850 Surge Watts PORTABLE GENERATOR INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual.
GEN1850 1850 Surge Watts Portable Generator 2 TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOL S, WORDS AN D LABELS..................................................................................... ......... 3 PACKAGE CONTENTS PACKAGE CONTEN TS ..........
GEN1850 1850 Surge Watts Portable Generator 3 RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situation s that may occur.
GEN1850 1850 Surge Watts Portable Generator 4 Notice Regarding Emissions: Engines certified to comply with California and U.S. EPA emissi on regulations for SORE (Small Off Road Equipment) are certifi.
GEN1850 1850 Surge Watts Portable Generator 5 Powerful Voltage: This generator produces powerful voltage, which can result in electrocution. • ALWAYS ground this generator before using it.
GEN1850 1850 Surge Watts Portable Generator 6.
GEN1850 1850 Surge Watts Portable Generator 7 In addition to the previously described safety information, fam iliarize yourself with all safety and hazard placards on this ge nerator.
GEN1850 1850 Surge Watts Portable Generator 8 PACKAGE CONTENTS The following items are supplied with this Model GEN1850 Portable Generator. Verify that all items are included. STOP! If there are missing items, call 1-866-460-9436, Monday - Friday, 8 AM - 4 PM Central Time for customer service.
GEN1850 1850 Surge Watts Portable Generator 9 FEATURES: • 2.8 HP OHV Engine • Recoil Start • Gasoline Engine • 2 - 120 Volt A/C Outlet • 1 - 12 Volt D/C Outlet • 2.
GEN1850 1850 Surge Watts Portable Generator 10 PREPARING THE GENERATOR FOR USE Using this Generator for the First-Time STOP! The following section describes the required steps for preparing this generator for the first use. Failure to correctly perform these steps can damage this generator and/or shorten its life.
GEN1850 1850 Surge Watts Portable Generator 11 Step 2 - Add Gasoline Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns. • Do not fill the fuel tank near a heat, sparks or an open flame.
GEN1850 1850 Surge Watts Portable Generator 12 Subsequent Use of this Generator For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation. IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual.
GEN1850 1850 Surge Watts Portable Generator 13 STARTING THE GENERATOR STOP! Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this ma nual have been correctly completed.
GEN1850 1850 Surge Watts Portable Generator 14 USING THE GENERATOR • USE THIS GENERATOR ONLY OUTDOORS IN NON-CONFINED AREAS. DO NOT SECURE THE GENERATOR WITH A CHAIN OR ROPE, AS THIS WILL MAKE IT DIFFICULT TO MOVE IN AN EMERGENCY. • Keep at least several feet of clearance on all si des to allow proper ventilation for this generator.
GEN1850 1850 Surge Watts Portable Generator 15 Connect only electrical devices that are in good working order. Faulty devices or power cords present the risk of electrical sh ock. Immediately turn off and disconnect any d evice that commences to operate abnormally, sl uggish or abruptly stops.
GEN1850 1850 Surge Watts Portable Generator 16 SOME NOTES ABOUT POWER CORDS Long or thin cords can require more wattage from a generator to power an electrical device. Figure 6 shows the recommended cord s according to the power requirement of the electrical device.
GEN1850 1850 Surge Watts Portable Generator 17 STOPPING THE GENERATOR To stop this generator: 1. Turn off all connected electrical devices and then unplug them.
GEN1850 1850 Surge Watts Portable Generator 18 Checking the Oil Level It is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity. To check the oil level: 1. Verify that this generator is shut down and on a level surface.
GEN1850 1850 Surge Watts Portable Generator 19 Air Filter Maintenance Routine maintenance of the air filter helps maintain proper airflow to the carburetor. Occasionally verify that the air filter is free of excessive dirt. The air filter will require more frequent cleaning when oper ating this generator in extremely dusty areas.
GEN1850 1850 Surge Watts Portable Generator 20 STORAGE/TRANSPORT PROCEDURES Never place any type of storage cover on this generator while it is still hot. When transporting or storing this generator for extended time: • Allow generator to fully cool before moving it.
GEN1850 1850 Surge Watts Portable Generator 21 Engine will not start. Gas is not getting to carburet or. Make sure gas is getting to the carburetor. Remove the carburetor and turn the drain screw counter clockwise. Don’t remove completely. Engine will not start.
GEN1850 1850 Surge Watts Portable Generator 22 GEN1850 1850 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS DIAGRAM.
GEN1850 1850 Surge Watts Portable Generator 23 GEN1850 PORTABLE GENERATOR PARTS LIST GEN1850 2011 01.
An important point after buying a device Buffalo Tools GEN1850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buffalo Tools GEN1850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buffalo Tools GEN1850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buffalo Tools GEN1850 you will learn all the available features of the product, as well as information on its operation. The information that you get Buffalo Tools GEN1850 will certainly help you make a decision on the purchase.
If you already are a holder of Buffalo Tools GEN1850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buffalo Tools GEN1850.
However, one of the most important roles played by the user manual is to help in solving problems with Buffalo Tools GEN1850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buffalo Tools GEN1850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
