Instruction/ maintenance manual of the product BC2401IC Briggs & Stratton
Go to page of 12
Part No. 500264 Form No. F101001A Page 1 of 12 Operator Owner's Manual Thank You for Selecting 1 3 Specifications The Powerful BC2401 SELF-PROPELLED BRUSH CUTTER UNIT SIZE: OVERALL LENGTH: 82.5"(2.09 m) OVERALL WIDTH 32.0" (0.81m) OVERALL HEIGHT 43" (1.
Part No. 500264 Form No. F101001A WARNING: DO NOT 1. DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and deadly poison.
Part No. 500264 Form No. F101001A Page 3 of 12 For your safety and the safety of others, these directions should be followed: Do not operate this machine without first reading owner's manual and engine manufacturer's manual. Use of Eye and Breathing protection is recom- mended when using this machine.
Part No. 500264 Form No. F101001A Page 4 of 12 INSTRUCTION LABELS CONTROLS Throttle Control Owner's Manual Owner's Manual 500264 Warranty Card Warranty Card 400972 EU Declaration of Conformi.
Part No. 500264 Form No. F101001A ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline. ENGINE SPEED: Controlled by throttle lever on the handle.
Part No. 500264 Form No. F101001A Page 6 of 12 PARTS DRAWING 18 BC2401HE, BC2401H, BC2401IC.
Part No. 500264 Form No. F101001A Page 7 of 12 19 PARTS LIST ITEM BC2401HE BC2401H BC2401IC NO. DESCRIPTION Part No QTY Part No QTY Part No QTY 1 Deck Assembly with labels 500239 1 500239 1 500239 1 2.
Part No. 500264 Form No. F101001A Page 8 of 12 Parts List continued from page 9. 19 * Denotes standard hardware item, that may be purchased locally. Item Description BC2401HE Qty.
Part No. 500264 Form No. F101001A Page 9 of 12 OPERATION continued 16 Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.
Part No. 500264 Form No. F101001A When replacing one belt the other should be inspected for wear and replaced if worn. It is good practice to change both belts when either is worn beyond use. Use only original equipment belts for replace- ment. Billy Goat uses only premium quality, kevlar corded and coated belts in your unit.
Part No. 500264 Form No. F101001A Page 11 of 12 MAINTENANCE continued 17 Transaxle Drive Belt Blade Drive Belt Fig. 3 Belt in top groove of engine pulley Belt in bottom groove of engine pulley Engine (See Engine Manual) Check for excessive vibration Inspect for loose parts Maintenance Operation Follow these hourly maintenance intervals.
Part No. 500264 Form No. F101001A Page 12 of 12 Purchased from Purchase Date Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer. 22.1 21 Serial Plate R ecord your machine model, serial number and date-of-purchase and where purchased 22 min -1 Operator BILLY GOAT INDUSTRIES INC.
An important point after buying a device Briggs & Stratton BC2401IC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton BC2401IC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton BC2401IC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton BC2401IC you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton BC2401IC will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton BC2401IC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton BC2401IC.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton BC2401IC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton BC2401IC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
