


Household use only Thank you very much for buying this SHARP product. Before using your SHARP
refrigerator, please read this operation manual to ensure that you gain the maximum benefit
from it. This refrigerator is for household only, with ambient temperature between +5°C and +43°C. The refrigerator should not be subjected to temperatures of -10°C or below for a long period of time.

Fire marks means this refrigerator has risk of fire accident.
Ŷ Dust deposited on the power plug may cause fire.
This refrigerator contains flammable refrigerant (R600a: isobutane) and insulation blowing gas (cyclopentane). Observe the following rules to prevent ignition and explosion.
Wipe it off carefully. Ŷ
Pull out the plug if the refrigerator is not used for a long time. If the flexible supply cord is damaged, it must be replaced by service agent approved by SHARP in order to avoid a hazard.
Ŷ
Do not damage the refrigerant circuit. Do not allow any sharp objects to have contact with the refrigeration system. The refrigeration system behind and inside the refrigerator contains refrigerant. Leaking refrigerant can ignite and may damage the eyes. Do not use mechanical devices or other means to accelerate the defrosting process. (This refrigerator has an automatic defrosting system.)
Ŷ
Ŷ
Do not install the refrigerator in a damp or wet location. It may cause the damage to the insulation or electrical leak. Dew may also appear on the outer cabinet and it causes rust. The refrigerator should be installed flatly and firmly on the floor.
Ŷ Do not use electrical appliances inside the refrigerator. Ŷ Do not block the space around the refrigerator.
Ŷ
Do not use flammable sprays, such as spray paint near the refrigerator.
Ŷ
Do not store flammable sprays, such as spray paint in the refrigerator.
Do not store volatile and flammable materials such as ether, petrol, propane gas, aerosol cans, adhesive agents and pure alcohol etc. These materials are easy to explode.
In the case of failure of the refrigeration system, do not touch the wall socket and use open flames.Open the window and air out the room. Then ask a service agent approved by SHARP for service.
Do not store temperature-sensitive products such as pharmaceutical products in the refrigerator. There are high risks of changes in product quality.
Ŷ
Do not attempt to change or modify this refrigerator. This may result in fire, electric shock or injury.
Read carefully the following rules to prevent electric shock or fire. Ŷ
Do not place any object on the top of refrigerator. If the object falls down from the top, it may cause injury.
Make sure to protect the power cord from being damaged during installation or moving. If the power plug or cord is loose, do not insert the power plug.
Ŷ Do not hit the glass doors hard.
Otherwise, they may break and cause physical injury.
Do not place multiple portable socket-outlets or portable power supplies at the rear of the refrigerator.
This appliance can be used by children aged from 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way or understanding the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
Connect the power plug into the wall socket firmly and directly. Do not use an extension cord or adapter plug.
Connect the power plug to the socket with the required rated voltage.
Ŷ Connect the earth pin to the earth terminal properly. Ŷ Do not touch the power plug with wet hands. Ŷ
Disconnect from the main electricity supply by removing the main plug from the socket.Do not remove by pulling the power cord.

Care and Cleaning
Ŷ Ŷ
Ŷ
Ensure that the refrigerator presents no danger to children while being stored for disposal. (e.g. remove the magnetic door seals to prevent child entrapment.)
Unplug the refrigerator first to prevent electric shock. Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.
This refrigerator should be disposed appropriately. Take the refrigerator to a professional recycling plant for flammable refrigerant and insulation blowing gases.
Ŷ
If you smell something burnt, pull out the power plug immediately. Then ask a service agent approved by SHARP for service.
In case of gas leak, ventilate the area by opening window. Do not touch the refrigerator or the powersocket.
Transportation
ŶWhen you install or move your refrigerator, use curing
Do not touch foods or metal containers in the freezer compartment with wet hands. This may cause frostbite.
mat to protect the floor from being damaged. Ŷ
Carry the refrigerator securely. If you lift up the refrigerator improperly, it may cause injury.
Do not place bottled drinks and cans in the freezer compartment.
Ŷ Do not use other than potable water to make ice cubes. Ŷ
Do not open or close the door when other people put a hand near the door. There is a risk that the other people may get their fingers caught in the door.
Do not put oversized object in the pockets of the door. If the object falls down from the pockets, it may cause injury.
Make sure to handle the glass shelves with care to install or uninstall. If you drop the glass shelves, it may break or cause injury.


1 Keep adequate ventilation space around the refrigerator.
The figure shows the minimum required space for installing the refrigerator. The amount of space around the refrigerator affects the amount of power consumption. Insufficient spacing will decrease cooling efficiency and increase energy consumption. This may reduce the life of the unit and void warranty. If using the refrigerator in the smaller space dimension than figured, it may cause temperature rise in the unit, loud noise and failure. The space between the rear of the refrigerator and the wall should be 50 mm or more.

refrigerator flatly and firmly on the floor.
(2 pcs.)
Connect the appliance via a correctly installed socket.
Position your refrigerator so that the plug is accessible.
Keep your refrigerator out of direct sunlight and do not place next to heat generating appliance. Do not place your refrigerator directly on the ground. Insert suitable stand such as wooden board under the refrigerator.
Before using your refrigerator
Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water.





Door pocket (4 pcs) 2. Refrigerator shelf (3 pcs) 3. Crisper shelf
Frigure 1 Frigure 2
7KHYHUWLFDOEDULVLQ correct position, the door FDQEHFORVHG
7KHYHUWLFDOEDULVQRWLQ correct position, the door FDQQRWEHFORVHG\RXVKRXOG reposit it as Figure 1.
How to make ice cubes
3RXUWKHZDWHULQWRWKH twist ice maker
As for the details, refer to chapter “Operation”.
As for the details, refer to chapter “Operation”.
When ice cubes are made, turn the lever clockwise to put the ice into the ice cube box.

Following parts are included with shipment in the freezer drawer.
Deodorizing catalyst is installed on the routes of cold air. There is no need to operate and clean.
When the refrigerator or freezer door is left open for over 1 minute, the alarm sounds 5 times (Beep beep ). If you do not close the door, the alarm sounds every 30 seconds.
The alarm stops after close all doors.


Operation
The temperature that indicated on the control panel is not the exact temperature inside.
When you press one of the keys, the display lights up. All modes are off initially. When there is no key operation for approximately 2 minutes, the display turns off.

Control panel is locked automatically 25 seconds after the last key operation (Mode icon lights up on the display after the beep ).
The icon of running mode lights up on the display.
If you want to lock the control panel,press button for 3 seconds or more right after the mode icons (selected temperatures) light up.
Press button for 3 seconds or more again to unlock.
The refrigerator controls its temperature automatically. You can adjust the temperature as below if you need.
The temperature is adjustable between -14°C and -22°C in step of 1°C
The temperature is adjustable between 2°C and 8°C in step of 1°C
(This setting is valid except for Energy saving and Vacation mode.)
(This setting is valid except for Energy saving and Express freezing mode.)
How to operate
button and select temperature.
button and select temperature.
(Temperature changes each time you press the button.)
(Temperature changes each time you press the button.)
(5 sec.)
(5 sec.)
(Selected temperature lights up.)
(Selected temperature lights up .)

Vacation mode
Use this mode to switch the appliance to energy-saving operation.
Use this mode when going on a trip or leaving the house for a long time.
How to operate
Select the mode icon.
Select the mode icon.
(5 sec.)
(5 sec.)
(The icon lights up.)
(The icon lights up.)
Follow steps 1 to 2 again to turn off this mode (the mode icon turns off) .
Follow steps 1 to 2 again to turn off this mode (the mode icon turns off) .
The temperature setting of this refrigerator is adjusted according to the ambient temperature. Suitable temperature settings show up on the display.
Temperature setting for refrigerator compartment is not accepted during this mode.(Temperature is changed to 17°C automatically . )
button, mode icon If you press
Temperature setting is not accepted during this mode.
If you press flashes 3 times.(Indicated temperature cannot be changed.)
or button, mode icon
flashes 3 times.(Indicated temperature cannot be changed.)
Temperature setting during this mode is as follows.
Cancel this mode if you feel the beverages are not cooled enough or ice making takes longer time.
Tips for saving energy
Install the refrigerator in a well-ventilated area and keep
For hygienic reasons, do not put foods in the refrigerator compartment while this mode is ON.
the space to ventilate. Keep your refrigerator out of direct sunlight and do not
place it next to heat generating appliance. Avoid opening the door as much as possible. Hot food should be cooled before storing. Place the food evenly on the shelves to allow the cool
air to circulate efficiently.

Express freezing
This mode is to freeze food quickly not to lose its flavor.
The ionizer inside your refrigerator releases clusters of ions which are collective masses of positive and negative ions,into the refrigerator compartment. These icon clusters inactivate airbone mold fungus.
Select the mode icon.
(5 sec.)
button for 3 seconds or more.
(The icon lights up.)
Follow steps 1 to 2 again to turn off this mode (the mode icon turns off) .
Temperature setting for freezer compartment is not accepted during this mode.(Temperature is changed to -25°C automatically . )
(The icon lights up.)
The indicator (blue) in the refrigerator turns on.
Temperature setting during this mode is as follows.

button, mode icon If you press flashes 3 times. (Indicated temperature cannot be changed. )
This mode ends automatically 50 hours later after setting.
Follow steps 1 to 2 again to turn off this mode (the mode icon turns off) .
Large food cannot be frozen in a single operation.
There may be a slight odor in the refrigerator. This is the smell of ozone generated by the ionizer. The amount of ozone is minimum and quickly decomposes in the refrigerator.
Avoid opening the door as much as possible during operation of this mode. The operating sound may become louder than usual while this mode is ON but it is normal.


Fresh zone temperature control
Temperature of the fresh zone can be adjusted according to the type of storage food.
When the knob is placed at the “Crisper” position, you can use the chiller zone as a crisper. It is suitable for maintaining the appropriate temperature and humidity for fruits and vegetables. When the knob is placed at the “Fresh” position, it is suitable for short-term storage of fish or other fresh food. This is the best way to keep freshness. In this case, it is recommended to set the refrigerator temperature below 4°C and usethe food within 3 days.
To prevent cracks on inside surfaces and plastic components, follow these tips.
Wipe out food oil adhered to plastic parts. Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water). If undiluted detergent is used or soapy water is not wiped off thoroughly, it may result in cracks of plastic parts.

For hygienic reasons, make sure to do following things regularly.
Remove the accessories (e.g. shelves) from the cabinet and the door. Wash them by warm soapy dishwashing water. After that, rinse them in clean water and dry. Clean the inside with a cloth soaked in warm soapy dLVKZDVKLQJ water.Then, use cold water to wipe off soapy water thoroughly.
Ŷ
Wipe the exterior with a soft cloth each time it gets dirty. Clean the magnetic door seal with a toothbrush and warm soapy dishwashing water. Wipe the control panel with a dry cloth.
Ŷ
Do not use hot water, household cleaning powders, creams or spray-on cleaning products, or any other cleaning products such as mineral turpentine, methylated spirits, thinners, petrol etc. These may damage your refrigerator and may void any warranty. If the power supply is disconnected, please wait at least 5 minutes before re-connecting power. The glass shelves are heavy. Hold them firmly when you remove the shelves from the cabinet and carry. Do not drop objects inside the refrigerator or strike the inner wall. This may cause cracks to inner surface.
Humidity adjustment for crisper zone
Humidity of the crisper zone can be adjusted.
Switching off your refrigerator
It is suitable for vegetables when the knob is placed on the right. It is suitable for fruits when the knob is placed on the left.
If the refrigerator needs to be switched off for an extended period, the following steps should be taken to reduce the growth of mold:
Defrosting is automatically operated by a unique energy saving system.
When the compartment light is blown
Contact the service agent approved by SHARP to replace the light. The light is not to be replaced other than by qualified service personnel.


Control panel

You can choose the purpose of use of this zone.
Refrigeration reduces the rate of food spoilage. Ensure that the food is of the freshest possible quality to maximize the shelf life of perishable foods. The following is a general guide to help promote longer food storage.
Advice for preventing dew or frost inside the refrigerator
Fruit and vegetables should be loosely enclosed in a plastic material e.g. wrap, bags (do not seal) and placed in the Fruit and vegetable crisper to minimize moisture loss.
Keep the door securely closed. If the food falls down, it may cause a gap between the cabinet and the door. Move it back to the shelf or the pocket. Food with high-moisture should be stored in airtight container or sealed tightly.
Dairy Products & Eggs
Most dairy products have their best-before date on the outer packaging which informs the recommended temperature and shelf life of the foods. Eggs should be stored in the Egg tray.
Evenly place the food on the shelves to allow the cooling air to circulate efficiently. Hot foods should be cooled before storing. Storing hot foods inceases the temperature in the unit and risk of food spoilage.

Meats / Fish / Poultry
Place on a plate or a dish and cover with paper or plastic wrap. For larger cuts or meat, fish, or poultry, place to the rear of theshelves. Ensure all cooked food is wrapped securely or placed in an airtight container
Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance. Do not block the outlet and inlet of the cool air circulating circuit with foods or containers;otherwise the food is not be evenly cooled tKURXJKRXW the refrigerator.
limited time to prevent spoilage and badly affecting
other stored foods.
For best freezing
Quality of foods should be fresh. Freeze smallquantities of food at a time in order to freeze them quickly. Food should be properly sealed or covered tightly. Place foods in the freezer evenly. Label bags or containers to keep an invenory of freezing food.
Do not place food directly in front of cold air outlet. This may lead to the food freezing.


Before calling for service, check the following points.
Problem Solution / Situation
Make sure to contact service agent approved by SHARP.
appears on the display.
If you still require service Refer to your nearest service agent approved by SHARP.
Error indicator( · )

Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.