EN
Official user manual

Kitchen Kitchen Scale

1 pages·135 KB·Kitchen Scale·PDF·ENDEFRITNLJA
Kitchen Kitchen Scale
Table of Contents 8 sections SWITCH OFF · UNIT EXCHANGE (g/oz) · OVER LOAD INDICATOR · O-Ld · … ShowHide
Page 1 of the Kitchen Kitchen Scale user manual — TARE (TO WEIGHT DIFFERENT INGRELENTS IN THE SAME CONTAINER)
Page 1 · click to enlarge
Page 1

For the purpose of proper using & maintaining the kitchen scale, please read this instruction completely before operating. SPECIFICATIONS

SWITCH OFF

After finish weighing press key of “ON/OFF”. When you step off the scale, it will automatically switch off if no weighting is carried out while the zero is being displayed the scale switches itself off automatically after approximate one minutes.

Equipped with a high precision “strain-gauge” sensor. Capacity ⃝1000g ⃝3000g ⃝5000g ⃝7000g ⃝10000g. Division 0.1/1g LCD display Automatic zero resetting. Automatic switch off. Low power indicator. Over load indicator “0-LD” Tare Two model unit (g/oz)

UNIT EXCHANGE (g/oz)

Press the key of “MODE”, you can choose the unit of “g” or “oz”.

OVER LOAD INDICATOR

When the scale is overload, the following will appear on the screen “0- LD”.

O-Ld

POWER SUPPLY

ADVICE FOR USE AND CARE

Pls rapidly install in the battery to battery holder after open the cover of battery holder. Battery: AA1.5V=3V Work voltage :2x1.5V=3V Low battery indication “LO”

Placing your scale on a hard. Flat surface, and make sure it is steady before use. And then please place the object that will be weighed in the middle of the scale to ensure the greatest accuracy. Do not use chemical abrasive cleaners to clean the scale. Do not allow your scale to became saturated with water as this can damage the electronics. Do not store the scale in an upright position when not is use as this will drain the batteries. Remove the batteries if the scale is not being used for a long time. Treat your scale with carefully because it is a precision instrument. Do not drop it on it.

OPERATION

1. Put the kitchen scale on a hard & flat surface. STEP2: Press the key of “ON/OFF’’, the scale will be zero in 3 seconds. STEP3: Put the object that will be weighed into the container, the weight will appear on the display.

TARE (TO WEIGHT DIFFERENT INGRELENTS IN THE SAME CONTAINER)

Leave the first ingredient weighted in the container, press key of “TARE” to reset the display to “0”, add the nest ingredients to the container and the weight appears on the display, and so on.

Ask about the Kitchen Kitchen Scale

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Kitchen Kitchen Scale

Be the first to ask — other owners or our team will answer.

Original document

Kitchen Kitchen Scale manual PDF

1 pages·135 KB·Kitchen Scale·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…