


This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The battery must be removed from the appliance before it is scrapped. The battery is to be disposed of safely. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. Attention should be drawn to the environmental aspects of battery disposal. Don’t throw used batteries in dustbin. Please contact your retailer in order to protect the environment. The battery (battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Always use the scale on a hard, flat surface. DO NOT use on carpet.
DO NOT strike, shake or drop the scale.
Keep the scale dry.
Battery handling and usage
Only adults should handle the battery. Do not allow children to use the product unless the
battery cover is inserted.
Replace the battery only with the same type. The battery used in the product is one 3V lithium
CR2032 battery (supplied).
The battery type used in this product is a CR2032 lithium battery. This battery is located internally and is readily accessible. Remove the battery cover to remove the battery. This battery must be disposed of at your local recycling point. Li


1/W eighing area
5/W all mounting hole
2/Z ERO button
6/B attery cover
3/D isplay
7/U NIT button
4/M ODE button
Replacing the battery


Working modes:



You can select the measurement unit between the Metric (g, ml) or Imperial (lb:oz, fl’oz) system.
Press the MODE button to select the desired working mode and then press the UNIT button to convert between the two systems.
Weight Mode 1.Place the scale on a flat, stable surface. 2.Press the scale by hand and wait until the display to show 0 before you start weighing. Make sure the scale is in weight mode. If not, repeatedly press the MODE button until the weight mode indicator ( ) appears on the display. 3.Put ingredients to be weighed onto the surface of the scale. 4.The display will show the weight reading.
Volume Mode 1.P lace the scale on a flat, stable surface. 2.Press the scale by hand and wait until the display to show 0, then repeatedly press the MODE button until the milk ( ) or water ( ) mode indicator appears on the display. 3.P lace a container (not supplied) on the scale. 4.P ress the ZERO button to reset display to 0. 5.P our liquid into the container. The display will show liquid volume. 6.T o view the weight of the liquid, repeatedly press the MODE button until the weight mode indicator appears on the display.
Display · Volumle unit (fl’oz)

Zero & Tare Function To measure items as they are added, use the Zero and Tare Functions. If the weight of the items being measured is below 4% of the scale’s capacity (less than 0.2kg/0.4lb), the Zero function is used. If the weight of the item exceeds 4% of the scale’s capacity, the Tare function is used. 1.Place the first item within the centre of weighing area of the scale. The display will show the weight reading of the first item. 2.Without removing the item, press ZERO to reset the display to 0. 3.Depending on the weight of the item, you will see the Zero indicator ( ) or the Tare indicator ( )on the display. 4.With the first item still in place, add the next item to the surface of the scales. The display will show the weight of that item. 5.Press ZERO to see the total weight of the two items. 6.Press ZERO again to reset the display to 0. 7.Repeat the steps above until all items have been added. Do not exceed the maximum weight capacity of the scale.
Minus Function If you add multiple items to the scale at one time to get a total weight, you can identify the value of a single item by using the minus function. 1.P lace items to the scale. The display will show the total weight. 2.P ress ZERO to reset the display to 0. 3.R emove an item. The display will show the weight of the removed item with the minus function indicator ( ). 4. Press ZERO to see the weight of any remaining items. 5.R epeat steps above as needed.
Auto Shut-Off The scale will automatically power off when the display shows 0 or the weight reading for about 1 minute.
Max. Capacity: 5kg / 11 LB Min. Effective: 10g / 0.5 OZ Graduation: 1g / 0.1oz Power: 1 x 3V Lithium cell (CR2032)
lean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical / abrasive cleaning agents. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavoured / coloured foods. Avoid contact with acids citrus juices.
Storage Store the scale in a dry location. The scale can be stored on a level surface or can be hung by using the wall mounting hole.

As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for the appliance, packaging materials and if applicable, batteries. This will help conserve natural resources and ensure that it is recycled in a manner that protects health and the environment.
You must dispose of this appliance and its packaging according to local laws and regulations.
Because this appliance contains electronic components and may contain batteries, the appliance and its accessories must be disposed of separately from household waste when the appliance reaches its end of life.
Contact your local authority to learn about disposal and recycling.
The appliance and if applicable, batteries should be taken to your local collection point for recycling. Some collection points accept appliance free of charge.
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.