Instruction/ maintenance manual of the product AVC-2210 Adaptec
Go to page of 43
R V ideOh! DVD A VC-2210 User’ s Guide.
ii Copyr ight © 2003 A da ptec, Inc. Al l righ t s reserv e d . No part of thi s public at io n may be repr o duced, stor ed in a retrieva l system, or transmit ted in any form or by any means , electron ic , m e ch an ical, photocop y ing, recordin g or o therw ise, wi tho ut the prio r writt en con sent of Ada ptec, In c.
iii Adaptec T echnical Suppor t If you ha ve questions abou t installi ng or using your Adap tec pro duct, check thi s document fi rst—you will find answ ers to most of your quest ions here. If you need further a ssistance, us e the support o ptions lis ted below .
iv Limited 2- Y ear Hardware W arranty 1. Adaptec, Inc. (“Adaptec”) warrants to the purchas er of this pr oduct that it will be free f rom defects in material and workmansh ip for a period of tw o (2) years fr om the date of pur chase.
v Adaptec Soft ware License Agreemen t PLEAS E RE AD CA REF ULL Y : TH E USE OF TH IS SO F TW ARE I S SUB JEC T TO THE S OFT W A RE LICENSE TERMS OF ADAPTEC, INC.
vi 7. Limited W arranty . Adaptec and its Licensors warrant only that the media upon which the Software is furnished will be free from defects in material or workmanship under normal use and service for a period of thirty (30) days from the d ate of delivery to yo u.
vii Should you have any questions concerning this Agreement, you may contact Adaptec by writing to: Adaptec, Inc. Legal Department 691 South Milpitas Boulevar d Milpitas, California 95035.
viii European U nion C omplia nce S tatement This Information T echnology Equipment has been tested a nd found to comply with EMC Directive 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC , in accor.
1 In this Guide Introduc tion 2 What’ s in the Pack age 3 System Requ ir em ents 3 This is Y our A VC-2210 4 Pluggin g In Y our A VC- 2210 5 Installi ng the Dr ivers 6 Installi ng Son ic MyD V D 21 .
2 VideOh! D VD A VC-2210 User’ s Guide Intr oducti on Congratu la tions on the purchase of yo ur Adaptec V ideOh! ™ DVD A VC- 2 210. W ith you r V id e Oh ! DVD kit, you can convert you r analog videos into digital format and cr eate your own V ideo CDs (VCDs) and DV Ds.
3 What’ s i n the P ackage What ’ s in the Pac kag e Y our Adaptec V ideOh! DVD pack ag e includes: ■ Adap tec A V C-22 10 U SB 2 . 0 MPE G-2 cap ture d e vic e ■ A stan d for the Ada ptec A V.
4 VideOh! D VD A VC-2210 User’ s Guide This is Y our A VC-2210 P ower LED Status The LED on the front of the A VC-2210 light s up to i ndicate the status of operation.
5 Plugging In Y our A VC-2210 Plugg ing In Y our A VC-221 0 T o set up your A VC-2 210: 1 Connect the power adapter . (See the figur es on page 4 if you need he lp locating t he ports on your A VC-2210. ) 2 Connect your video device to your A VC-2210 using the included A/V cable.
6 VideOh! D VD A VC-2210 U ser ’ s Guide 3 T urn on your computer if you haven ’ t already done so, then connect the A VC-2210 to your comput er using the provided USB 2.0 cable . 4 Insert the V ideOh! Installatio n CD into your CD-ROM drive. 5 T urn on the A VC-2210 by pres sing the Power button.
7 Installing the D rivers Windows XP W ind o ws XP au tomatica lly detects your device and opens the Found New Hardware W izard. T o perform th e install ati on, follow the instructions provided in this section. Note: Before installing the driver , make sur e the V ideOh! Installation CD is in your CD-ROM drive.
8 VideOh! D VD A VC-2210 U ser ’ s Guide 2 If this window appears, click Continue A nyway . Note: Adaptec drivers have been fully tested and certified to work with the A VC-2210 device. W in dow s in stalls the driver . 3 Click Finish t o complete the USB Loader installa tion.
9 Installing the D rivers 6 Click Ye s to restart your computer . Note: If you plug you r A VC-2210 into a U SB 1.1 port , this messag e app ear s d urin g drive r inst allat ion: A hi-spee d USB de vice is plugge d into a n on-hi-spee d USB hub . This me ssag e ind i c ate s t hat your A VC -2210 will ru n at a reduced (U SB 1.
10 VideOh! D VD A VC-2210 U ser ’ s Guide Windows 2000 W in dows 2000 auto matically detect s your device and opens th e Found New Ha rdware W iza rd. T o perform the insta lla tion, follow the instructions provided in this secti on. Note: Bef ore installing the driver , make sure the V ideOh! Installati on CD is in your CD- RO M drive.
11 Installing the D rivers 2 Select Searc h for a sui tabl e dr iv er ... , then click Ne xt . 3 Select only CD- RO M dri ve s , then click Ne xt . W ind o ws locates a d r iver f ile.
12 VideOh! D VD A VC-2210 U ser ’ s Guide 4 Click Next . Note: The drive letter for your CD-ROM may be differ ent than the one shown in the example above. 5 Click Finish to complete th e USB Loader installatio n. 6 Repeat ste p s 2 through 4 to insta ll th e device driver s.
13 Installing the D rivers 7 If this w indow appea rs, click Ye s . Note: Adaptec dri vers ha ve been fully tested and certified to wo rk wi th th e A VC-22 10 dev ice.
14 VideOh! D VD A VC-2210 U ser ’ s Guide 9 When the installation is complete, restar t your computer . Note: T o check if the driver is installed properly , you can follow th e instructions provided in Need Help In stalling Y our Devic e Driv ers? on page 28 .
15 Installing the D rivers 2 Select Automatic sea rch... , then click Ne xt. 3 Click Finis h to com plete the U SB Lo ader ins talla ti on. 4 Fro m th e Ad d N e w H a rd w a re Wiz a rd , r e p e at S t e p s 1 t h ro u gh 3 to install the de vice drivers.
16 VideOh! D VD A VC-2210 U ser ’ s Guide Windows 98SE W in dows 98SE aut omaticall y detects your d ev ice and opens the Found New Ha rdware W iza rd. T o perform the insta lla tion, follow the instructions provided in this secti on. Note: Bef ore installing the driver , make sure the V ideOh! Installati on CD is in your CD- RO M drive.
17 Installing the D rivers 2 Select Search f or best driver ... , then click Next . 3 Select only CD- RO M dri ve , then click Next ..
18 VideOh! D VD A VC-2210 U ser ’ s Guide 4 Click Next . Note: The drive letter for your CD-ROM may be differ ent than the one shown in the example above.
19 Installing the D rivers 6 In the Add New Har dw are W izard, cl ick Next then follow steps 2 through 4 to instal l device drivers. 7 If req uired, insert your W indows 98SE CD, then click OK .
20 VideOh! D VD A VC-2210 U ser ’ s Guide 8 Click Finish to complete th e installati on . Note: If the driver f ile being installed fr om the V ideOh! installation CD is older than the existing driver file, you may get a version conflict messa ge. Select to keep the newer driver file.
21 Installing Sonic MyDVD Instal li ng Sonic MyD VD After you install yo ur drivers, you need to in sta ll MyDVD. T o install M yDVD: Note: If yo u ha ve an older versio n of MyDV D a lready installed on your system, you must un install it first before insalling the n ewer version.
22 VideOh! D VD A VC-2210 U ser ’ s Guide Before yo u begin cre ating: ■ Make sur e your an alog video device (such as a cam cor der or VCR) is connected to the A VC-2210 and switched on. ■ If you have an external DVD/CD recor der , make sure it is connected to your computer and switched on.
23 Creat ing A Vi deo Pr oject Wit h MyD VD 2 Move the mouse pointer over either DVD-V i deo or V ideo CD (depending o n wha t type of media y ou want ), then click Create or Modify a ... Pr oject . The Main pr oject window appears. 3 On the Main pr oject window (shown in Step 2 ), click Captur e .
24 VideOh! D VD A VC-2210 U ser ’ s Guide 5 T o begin tra nsferrin g your video to y our computer , click Start Capturing . MyDVD captures your video, in cluding the aud io .
25 Creat ing A Vi deo Pr oject Wit h MyD VD T rim Y our Video Now that yo u ’ ve captured some video footage, you can trim it. For example, you can change your Start and End points. Y ou can also choose the specific video frame that you want to use as the thumbnai l picture that is display ed in your Main project window .
26 VideOh! D VD A VC-2210 U ser ’ s Guide Previe w Y our Projec t It ’ s a good id ea to see how your DVD/VCD project will look bef ore you burn it to disc. T o preview your pr oject, press Preview at the bottom of your M ai n project window , then dou ble-click the thumbna il cl ip you want to look at.
27 Sharin g Y our DVD or VC D Sharing Y our D VD or VCD Now that yo u ’ ve captured your video and burned it to a DVD or CD, you ’ re ready to share it. Y ou can play you r newly created DVD on most compatible DVD players and your VCD on most compatible DVD players or CD-RO M drives.
28 VideOh! D VD A VC-2210 U ser ’ s Guide Need Help with Y our A VC-2210? Note: See the Readme file on the V ideOh! Installation CD for the latest info rma tion. ■ Ensure that your analog v ideo d evice is conn ected and power ed on. ■ Double-check all cable connections.
29 Need Help Installin g Y our Device Drivers? 3 Click Sound, video and game controllers , an d check that Adapt ec A VC-221 0 USB De vice appears, as show n in the fol lowing figure. Note: The screen you see on your computer may be differ ent than the one s hown in the example above.
30 VideOh! D VD A VC-2210 U ser ’ s Guide For W indows 2000: 1 On the bottom left of your desktop, click the Start button, s elect Settings and click Co ntrol Panel , then double-click System . The System Properties w indow opens. Click the Hardware tab.
31 Need Help Installin g Y our Device Drivers? For W indows Me a nd 98SE: 1 On the bo ttom left of your desktop, click the Start button, select Settings and click Control Pane l , then double-click System . The System Properties win dow opens. 2 Open De vice Manager , and select V iew device s by type .
32 VideOh! D VD A VC-2210 U ser ’ s Guide Need Help Captur in g Y our Video? ■ If your analog video device, such as a VCR or camcor der , is not powered on, after about 1 minut e, you will get an error messa ge. T o allo w M yDVD to recognize an d capture the video : a Click OK to close the error message.
33 Need Help Bu rning Y our Vid eo? ■ If ther e are lar ge gaps in your analog video tape of about 5 minu tes, MyDVD stops capt uring . T o conti nue, forwar d to a new clip and start capturing. Gaps in video footage ar e often caused by stops, pauses, static, o r unrecor ded space in the original recording.
34 VideOh! D VD A VC-2210 U ser ’ s Guide T echnical Sp ecificat ions Te c h n o l o g y U S B 2 . 0 V ideo C aptur e Forma t MPEG-1 and MPEG-2 Bit Rate Constant bit rate (CBR) V ideo S tand ards NTSC for mat a t 29 .
R Ada p t e c , In c . 691 South Milpitas Boulevar d Milpitas, CA 95035 USA © 2003 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are tr adema rks of Ad aptec , Inc. which m ay be registe red in some jurisd iction s. Part Number: 513543-06, Ver.
An important point after buying a device Adaptec AVC-2210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Adaptec AVC-2210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Adaptec AVC-2210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Adaptec AVC-2210 you will learn all the available features of the product, as well as information on its operation. The information that you get Adaptec AVC-2210 will certainly help you make a decision on the purchase.
If you already are a holder of Adaptec AVC-2210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Adaptec AVC-2210.
However, one of the most important roles played by the user manual is to help in solving problems with Adaptec AVC-2210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Adaptec AVC-2210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
