EN
Lorus logo
Official user manual

Lorus Z012

2 pages·3.6 MB·Watch·PDF·ENDEFRITNLJA
Lorus Z012
Table of Contents 72 sections NREZ012 10-2010 · CAL. Z012 (R23 SERIES) · S2 · MODE · … ShowHide
Page 1 of the Lorus Z012 user manual — S3
Page 1 · click to enlarge
Page 1

NREZ012 10-2010

CAL. Z012 (R23 SERIES)

- Multi-function digital watch with 12 or 24 animation dots.

Selection of 12-hour/24-hour format

  • The time display format in either 12-hour indication or in 24-hour indication can be selected by pressing S2 button. Under the 12-hour indication format, no mark appears on the display. Under the 24-hour indication format, “ -” mark appears under the date indicator.
  • The calendar automatically adjusts the dates and months from the year of 2000 up to 2049.
  • CHARACTERISTICS

1. Analogue & digital time displays: Hour, Minute, Second, Month, Date and day of the week. 2. Automatic calendar: The calendar automati- cally adjusts the dates and months from the year of 2000 to 2049. 3. Daily alarm and hourly chime: The alarm can be set to sound at the designated time on a 24-hour basis and the chime can be set to sound every hour on the hour with a single beep. 4. Second time zone: Time in a different time zone can be displayed. 5. Countdown timer: The countdown timer can be set up to 23 hours 59 minutes and 59 sec- onds. 6. Stopwatch: The stopwatch can measure up to 23 hours 59 minutes and 59 seconds in 1/100-second increments. Split time measure- ment is available. 7. Selection of 12 or 24-hour format: The time display format in either 12-hour indication or 24-hour indication can be selected. 8. Animation dots are displayed: Animation dots are displayed in both 12 and 24-hour for- mat and can be selected in either fast flashing or slow flashing. 9. EL backlight: The built-in electro-luminescent (EL) backlight illuminates the display for easy viewing in darkness.

S2

  • H O W T O C H A N G E T H E D I S P L AY

MODE

* Press S3 button to show the NORMAL TIME mode. * If the NORMAL TIME mode is shown already on the display, skip the above operation. * Press S3 button to change the display mode in the following order.

NORMAL TIME

Lorus Z012 — NORMAL TIME diagram (page 1)
Fig. 1
Lorus Z012 — NORMAL TIME diagram (page 1)
Fig. 2

S3

  • LCD DISPLAY AND BUTTONS FUNCTION
Lorus Z012 — S3 diagram (page 1)
Fig. 3

ANIMATION DOTS

S1 (STAR T/STOP)

S3

S4 (SET)

MONTH

DAY OF

WEEK

DATE

24HOUR FORMAT

S3

S2 (RESET/

S3 (MODE)

LIGHT)

SECONDS

HOURS

MINUTES

CHIME SIGNAL

ALARM SIGNAL

S3

* Animation dots are displayed in both 12 and 24-hour format.

“ S T ” m e a n s “ Stopwatch”

Lorus Z012 — ANIMATION DOTS diagram (page 1)
Fig. 4

* P re s s S 1 o r S 2 t o switch from fast to slow flashing. (fast slow) * Press any key to switch from slow to fast flashing. (slow fast)

Lorus Z012 — ANIMATION DOTS diagram (page 1)
Fig. 5
Lorus Z012 — ANIMATION DOTS diagram (page 1)
Fig. 6

S1

S3

S2

  • SETTING THE TIME (ANALOGUE)
  • HOW TO SET ALARM TIME
1. Pull the crown out one step, the second hand will stop. 2. Set the correct time by turning the crown. 3. Push the crown back to the original position. The watch will start running again.
1. From NORMAL TIME mode, press S3 button once into ALARM mode. 2. Press S4 button to begin setting procedure. The hours digit starts flashing. 3. Press S1 button to set HOURS setting. 4. Press S3 button to move on to MINUTES setting. * Selection of the digits to be adjusted is made in the following order by pressing S3 button and then pressing S1 button. 5. Press S3 button after completing the setting.

* The analogue indication and digital display of the time setting can be adjusted separately.

Lorus Z012 — S1 diagram (page 1)
Fig. 7

S4

S1

MINUTES HOURS

S3

S3

S3

S3 S2

S3

DATE MONTH

  • HOW TO SET NORMAL TIME/ CALENDAR
Lorus Z012 — S4 diagram (page 1)
Fig. 8

PRESS S3

Lorus Z012 — PRESS S3 diagram (page 1)
Fig. 9

1 TIME

1. Press S3 button to show the NORMAL TIME mode. 2. Press S4 button to begin setting procedure. The seconds digit starts flashing. 3. Press S1 button to set SECONDS setting. 4. Press S3 button to move on to HOURS setting. * Selection of the digits to be adjusted is made in the following order by pressing S3 button and then pressing S1 button. 5. Press S3 button after completing the setting.

NORMAL TIME

ALARM MODE

S3

S4

S3 S3

SECONDS

MINUTES HOURS

S3

YEAR

S3

DATE SETTING BY PRESSING S1

HOURS SETTING BY PRESSING S1

S3 S2

S3

12/24-HOUR FORMAT

DATE

MONTH

S3

S3

* Day of week will change automatically based on date changing.

Lorus Z012 — NORMAL TIME diagram (page 1)
Fig. 10

S3

Lorus Z012 — S3 diagram (page 1)
Fig. 11

S4

MONTH SETTING BY PRESSING S1

MINUTES SETTING BY PRESSING S1

NORMAL TIME

SECONDS SETTING BY PRESSING S1

Engagement/Disengagement of ALARM & CHIME * With each press of S2 button, the ALARM and CHIME can be engaged or disengaged in the following order. The ALARM signal and/or CHIME signal appear or disappear on the dis- play accordingly. * The ALARM can be set only in one time zone. * If month and date are set, it will alarm once.

S3

S3

Lorus Z012 — S3 diagram (page 1)
Fig. 12

“ ” means “Daily Alarm”

PRESS S3

12/24-HOUR FORMAT

1 TIME

HOURS SETTING BY PRESSING S1

S2

S3

Lorus Z012 — PRESS S3 diagram (page 1)
Fig. 13

NORMAL TIME

ALARM MODE

S2

RESET

S3

S2

DATE SETTING BY PRESSING S1

MINUTES SETTING BY PRESSING S1

S3

S3

ALARM ON

Lorus Z012 — NORMAL TIME diagram (page 1)
Fig. 14
Lorus Z012 — NORMAL TIME diagram (page 1)
Fig. 15

S3

S2

S2

ALARM/ CHIME ON

MONTH SETTING BY PRESSING S1

YEAR SETTING BY PRESSING S1

CHIME ON

Show 8 more labels / short text on this page
12-hour 24-hour · 24-hour format indication · “AL” means · “Daily Alarm” · “DT”means “Dual Time” · “TR” means · “ Timer” · Crown
Page 2 of the Lorus Z012 user manual — S1
Page 2 · click to enlarge
Page 2
  • HOW TO SET COUNT DOWN TIMER

PRESS S3

4 TIMES

Lorus Z012 — PRESS S3 diagram (page 2)
Fig. 16

SET

S1 S4

TIMER MODE

NORMAL TIME

STOPWATCH

RESET

S3

MODE CHANGE

S2

S1 START

1. From NORMAL TIME mode, press S3 button 3 times into TIMER mode. 2. Press S4 button to begin setting procedure. The HOURS digit starts flashing. 3. Press S1 button to set HOURS setting. 4. Press S3 button to move on to MINUTES setting. * Selection of the digits to be adjusted is made in the following order by pressing S3 button and then pressing S1 button. 5. Press S3 button after completing the setting.

STOP

S1

1. Press S1 to start counting first lap time. 2. Press S2 button, the STOPWATCH keeps count- ing first lap time and showing it on the display. 3. Press S1 button to stop counting first lap time. 4. Press S2 button to release first lap time. 5. Press S1 button to start counting second lap time. The STOPWATCH shows second lap time. * This operation can be repeated and the split time can be read. 6. Press S2 to finish counting the lap time mearu- rement. 7. Press S2 again to reset the STOPWATCH to "0:00; 00."

S3

MINUTES HOURS

S3

S3

SECONDS

PRESS S3

3 TIMES

NORMAL TIME

TIMER

S1 S2 S2 S2 S1

S4

Start Lap 1 Reset Lap 2 Stop

PRESS S3

4 TIMES

S3

NORMAL TIME

HOUR SETTING BY PRESSING S1

STOPWATCH

S1 START

S3

S3

MINUTE SETTING BY PRESSING S1 SECOND SETTING BY PRESSING S1

RELEASE

S2 LAP

S2

STOP

START/STOP RESTART

Lorus Z012 — RELEASE diagram (page 2)
Fig. 17

S1

S1

RESET/ RELOAD &SET

* Press S3 button return to NORMAL TIME display.

S2

  • HOW TO USE EL BACKLIGHT

TIME COUNTDOWN SIGNAL

* Press S2 button in any mode to turn the illuminating light on.

1. Press S1 button while in the TIMER mode to start the COUNTDOWN TIMER. 2. The countdown signal “:” appears and starts flashing. 3. Press S1 button again to stop the COUNTDOWN TIMER. 4. While in the COUNTDOWN TIMER MODE, press S2 button to reset the countdown time to its starting value and to start to countdown automatically or while in countdown time mode press S2 button and then press S1 button to reset the countdown time. 5. Press S3 button return to NORMAL TIME display.

Lorus Z012 — TIME COUNTDOWN SIGNAL diagram (page 2)
Fig. 18

LIGHT ON

S2

RELOAD TIMER AND SET

S2

TIMER

  • CARE OF YOUR LORUS WATCH

START

S1

T h i s w a t c h c o n t a i n s p r e c i s e e l e c t r o n i c components. Never attempt to open the case or remove the back cover.

STOP

  • BATTERY

S1

CAUTION

START

Do not expose the old battery to fire or recharge it. Keep it at a place be- yond the reach of children. If a child swallows it, consult a doctor immedi- ately.

COUNTING STOP

  • HOW TO SET SECOND TIME ZONE
1. From NORMAL TIME mode, Press S3 button 2 times into DUAL TIME mode. 2. Press S4 button to begin setting procedure. The HOURS digit starts flashing. 3. Press S1 button to set HOUR setting. 4. Press S3 button to move on to MINUTE setting. * Selection of the digits to be adjusted is made in the following order by pressing S3 button and then pressing S1 button. 5. Press S3 button after completing the setting.
  • WATER RESISTANT
Condition of use Indication on the dial/ case backAccidental contact with water, such as splashes and rainSwimming and taking a showerSkin divingScuba diving No IndicationNONONONO WATER RESISTANTYESNONONO WATER RESISTANT (50M/5 BAR)YESYESNONO WATER RESISTANT (100M/10 BAR ( or aboveYESYESYESNO

PRESS S3

2 TIMES

  • * If your watch is 200 M/20 BAR, 100 M/10 BAR or 50 M/5 BAR water resistant, it is so indicated on the dial/case back.
  • Do not operate the buttons when the watch is wet.
  • If the watch is exposed to salt water, rinse it in fresh water and then wipe it thoroughly dry.
  • Should you find any water or condensation inside the watch, immediately have it checked. Water can corrode electric parts inside the case.

NORMAL TIME

DUAL TIME

S3

S4

S3

  • Caution: Leather straps are not water resistant except so indicated, even if the watch head is water resistant.
  • ALLERGIC REACTION Because the case and band touch the skin directly, it is important to clean them regularly. If not, shirt sleeves may be stained and those with delicate skin may develop a rash. Please wear the watch with some play to avoid any possible allergic reaction. If you develop a rash on your wrist, stop wearing and consult a physician.
  • MAGNETISM Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects.
  • SHOCKS AND VIBRATIONS Your watch may be worn for normal sports activities, but be careful not to drop it or hit it on hard surfaces.
  • TEMPERATURE Your watch is preadjusted so that constant accuracy may be insured at normal temperature.
  • CLEANING Use only a soft cloth and clean water for cleaning your watch. Never use chemicals, as the waterproof gasket will corrode.

HOUR SETTING BY PRESSING S1 MINUTE SETTING BY PRESSING S1

  • HOW TO USE STOPWATCH

* From NORMAL TIME mode, Press S3 button 4 times into STOPWATCH mode.

Lorus Z012 — NORMAL TIME diagram (page 2)
Fig. 19

STOPWATCH MODE

START/STOP

S1

STOPWATCH SIGNAL

S2

RESET/ LAP

1. Press S1 button alternately to start and stop the STOPWATCH. 2. Press S2 button to reset the STOPWATCH to "0:00; 00."
  • SERVICE When your LORUS watch requires repair or servicing, please see the enclosed WARRANTY/GUARANTEE.

S1

S1 S2

Show 6 more labels / short text on this page
Countdown Timer Setting · Lap Time Measurement · Countdown Timer Operation · Standard Measurement · Start Stop Reset · Printed in China

Ask about the Lorus Z012

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lorus Z012

Be the first to ask — other owners or our team will answer.

Original document

Lorus Z012 manual PDF

2 pages·3.6 MB·Watch·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…