Instruction/ maintenance manual of the product 62A12-1 Home Automation
Go to page of 12
62A12-1 Hi-Fi Expansion Kit Installation Manual Document Number 62I12-1 Rev A October, 2006.
Copyright © 2006 Home Automation, Inc. All Rights Reserved.
Page 1 Description This kit expands the HAI Hi-Fi Whole Home Audio Distribution System from 4 Zones and 4 Sources to a full 8 Zone, 6 Source system. Features: • Adds an additional 4 zones of audio a.
Page 2 1. Remove the faceplate. 2. The insert attaches to the RIM with one latch on th e right and one on the left. Using a small-bladed screwdriver, gently depr ess the la tch on one side while lifting up on th e insert. Once the latches are released on one side, remove th e insert from the other side.
Page 3 IR Output Each RIM ships with an IR flasher (62A08-1). The IR flasher is used for sending IR data to the source equipment. When you point your source equipm ent re mote control at the IR receiv.
Page 4 Changing the Color of the VSC The color of the VSC may be changed to complem ent the interior décor. Th e VSC is supplied with a white faceplate, knob, and insert. Additional colors ar e available; contact your HAI distributor for more information.
Page 5 Speaker Wiring When running the cables for speakers, use 16-gauge two-conductor or fou r-conductor (four-conductor stranded is recommended for neater installation) sp eaker wire. Speaker cable is hom erun from the speaker location to the location of the Hi-Fi Main Assem bly.
Page 6 Installing Zone Amplifier Cards Zone Amplifier Cards (ZAC) can be added at any tim e to increas e the total num ber of zones to eight. To install a Zone Amplifier Card: 1) Power down the Hi-Fi system by unplugging both Power Supply units (if applicable) from the inputs labeled “Power” on the Hi-Fi Main Assemble.
Page 7 4) Install additional Zone Amplifier Cards in an e mpty connector (CN5-CN8) by positioning the Zone Amplifier Card directly over the connect or and gently but firmly pushing down on both sides of the card until the t op and bottom are securely seated into th e connector.
Page 8 Powering the Hi-Fi Syst em The Power Supply (HAI Part Number: 62A07-1) pow ers the Hi-Fi processor and 4 Zone Amplifier Cards. One Power Supply is needed to power Zone s 1-4 and a second Power Supply (supplied) is used to power Zones 5-8 (when connected to the Power jack on the right).
Page 9 Specifications Zones 1-8 Power Amplifier Outputs Continuous Average Output Powe r: 30W (15W x 2) Two chan nels driven 30-20kHz @ 1% THD Rated Distort ion (1/2 power ): 0.
HAI • New Orleans, LA • U S A.
An important point after buying a device Home Automation 62A12-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Home Automation 62A12-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Home Automation 62A12-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Home Automation 62A12-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Home Automation 62A12-1 will certainly help you make a decision on the purchase.
If you already are a holder of Home Automation 62A12-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Home Automation 62A12-1.
However, one of the most important roles played by the user manual is to help in solving problems with Home Automation 62A12-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Home Automation 62A12-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
