

Year Hour Minutes Seconds
When the seconds digits are flashing, press button “C” in accordance with a time signal. The seconds are reset to “00” and start immediately. When the seconds count any number from “30” to “59” and button “C” is pressed, one minute is added and the seconds are immediately reset to “00”.
Notes: 1. When setting the hour digits in the 12- hour indication, check that AM/PM is properly set. In the 24-hour indication, there is no indication. 2. Once the year, month and date have been set, the day of the week is set automatically. 3. If the watch is left untouched in the time/ calendar setting display with the digits flashing, it will automatically return to the time/calendar display in 2 minutes.
B
B
LIGHT
S TA R T
C A
Minutes Seconds 1/100 seconds
Stopwatch Operation Press button “A” to show the stopwatch display.
L A P
A
Hourly time signal mark
Accumulated elapsed time measurement
The selection of the display can be made in the following order with each press of button “A”.
B C Reset
Start Stop Restart Stop
Accumulate repeatedly by pressing button “B”.
A
A
With each press of button “B” in the time/calen- dar display, the display changes over between the time/calendar and dual time alternately.
Lap 1 C C
I NSTRUCTION M ANUAL
CAL. W100 (RBM SERIES)
I HOW TO SET THE TIME/CALENDAR
Stop Reset B C
** Can repeat by pressing button “C”.
among the lap times previously measured, a beep rings and the display is illuminated.

Engagement/disengagement of the alarm and hourly time signal
be used simultaneosly.
Hourly time signal mark
Time of a different time zone can be set and displayed together with the time you have set in “HOW TO SET THE TIME/CALENDAR”.
start time setting display with the digits flashing, it will automatically return to the auto start display in 2 minutes.
Dual time display mark
“A” (AM)/“P” (PM) mark
Auto start time (countdown)
1. Press button “B” in the auto start display. The countdown of the set time will be started. With each press of the button, the countdown is started and stopped alternately. The stopwatch starts measuring when the set time is up. * At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and 1 seconds before the stopwatch measurement is started, a beep sounds and the light illuminates. 2. After the stopwatch is started, operate the buttons as explained in “Stopwatch Operation”.
TIMER
Alarm display mark Minutes Hour
“A”(AM)/ “P” (PM) mark
Hourly time signal mark Alarm mark
Selection of the preset time 1. Press button “A” to show the timer display. 2. Press button “C” to select the desired preset time. Selection of the preset time is made in the following order by pressing button “C”.
15 min. 30 min. 45 min.
10 min. 3 min.
Preset timer operation Press the button in the following order.
Time-up Stop Restart Warning sound beeps
Restart and stop of the timer can be repeated by pressing button “B”.

* When the set time is up, a warning sound beeps and the display is illuminated for 10 seconds. To stop them manually, press button “A”, “B” or “C”. * At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and 1 seconds before the set time is up, a beep sounds and the light illuminates.
The miniature lithium battery PANASONIC CR2025,which powers your watch should last approximately 2.5 years. However, because it is inserted at the factory, the actual life of the battery once in your possession may be less than the specified period. Be sure to replace the battery to prevent any possible malfunction as soon as it runs down. To replace the battery, we recommend taking the watch to a local watch repair shop.
15 min. 30 min. 45 min. → →
10 min. 3 min. Adjustable
seconds a day and/or the illuminating light for more than 5 seconds a day, the battery life may be less than the specified period.
Do not expose the old battery to fire or recharge it. Keep it at a place beyond the reach of chil- dren. If a child swallows it, consult a doctor immediately.
adjustable timer setting display with the digits flashing, it will automatically return to the timer display in 2 minutes.

Adjustable timer operation Refer to “Preset timer operation” above.
(dial, hands, buttons, case, bezel, strap, etc.)
✩If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store light energy from natural and artificial light sources and emit light in the dark. They are made of environmentally friendly material, and therefore, are harmless to human beings and the environment.
I ILLUMINATING LIGHT When the light button is pressed and released in the time/calendar, stopwatch, alarm, dual time or timer display, the light illuminates the display in red, green and both colors for 5 seconds for easy viewing in the dark.
I ViViDiGi ViViDiGi is a new type of liquid crystal panel that makes possible various colors and high contrast.
Printed in Hong Kong
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.