






Every 150 hours or every 12 months Spark plug
Remove carbon. Adjust gap. Replace if necessary.
Clean. Replace if necessary.
Clean. Replace if necessary.
Clean. Replace if necessary.
Check. ▀
Refresh if necessary. ▀ Valve clearance
▀ Fuel hose Check. ▀ Carburetor Check.
Check if necessary.
▀ SPARK PLUG 1. Remove spark plug.

AIR FILTER 1. Air filter 2. Wash in solvent 3. Motor oil (SEA #20) 4. Squeege out Never run engine without element.

FUEL FILTER 1. Stop the engine 2. Turn fuel cock lever to “OFF” 3. Clean with solvent

REFRESHING THE OIL 1. Start the motor for several minutes and then stop the motor. 2. Remove the oil filter cap. 3. Place the oil collect can under the motor, unscrew the oil drain plug and drain the oil. 4. Replace the oil drain plug. 5. Fill with fresh oil up to the maximum level. 6. Replace the oil filter cap. 8. APPLICATION RANGE AC application Model 1 kW – 4 stroke 950 Power factor
850 W 1
50 Hz 230 V
700 W 0,7~0,8
50 Hz 230 V
800 W 0,7~0,95
AC output Unit Model 1 kW Rated voltage V 230 V AC 12 V DC Frequency Hz 50 - AC current A 3,8 10
Rated output VA 850 120 9. TROUBLESHOOTING

Engine will not start: 1. Check fuel. Fuel cock to “ON” Clean the filter if necessary. 2. Engine switch to “ON” 3. Check the spark plug 4. If engine still will not start, check following: - Fuel cock clogging - Air filter clogging Or consult your dealer 10. TECHNICAL SPECIFICATIONS Generator: Type : self-energizing, 2 poles, 1 phase Frequency : 50 Hz Voltage : 230 volt AC = alternate current 12 V DC = direct current AC output : continu 850 W, max. 900 W DC output : 10 Amp. Engine: Type : 4-stroke, air cooled Fuel : unleaded petrol Fuel tank : 6 litres Oil : SAE 15W-30 Package: Dimensions : (lxwxh) 450 x 350 x 415 mm Weight (empty) : 24 kg Order number : 75015
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.