
User Manual
Machine type(s):
Models:
210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830


Conventions
LET OP: Note indicates a potentially dangerous situation that can cause personal injury.
Examples of such warnings are:
PLEASE NOTE: RISK OF INJURY: Danger of injury.
NOTE: DANGER OF ELECTRIC SHOCKS: Risk of electric shock.
NOTE: HOT SURFACE: Risk of burning in contact.
NOTE: TILT RISK: - Smell danger.
NOTE: ROTATING FAN BLADES: Indicates that there is a risk of injury from moving fan blades.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: You must not use this product with extension cords, plug boxes, distributors or UPS devices. The power capacity of this type of accessories can easily be exceeded by a laser printer, which can lead to poor printer performance, property damage or fire.
PLEASE NOTE: RISK OF INJURY: For this product, only use a Lexmark overvoltage protection that is correctly connected between the printer and the supplied power cord. Using non-Lexmark span protections can lead to poor printer performance, property damage or fire.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, do not place or use this product near water or damp locations.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, you should not turn this product on during thunderstorm and do not connect electrical cables or power lines such as a fax cord, mains cable or telephone cable.
Safety information 6

PLEASE NOTE: RISK OF INJURY: You should not cut, rotate, tie, pinch or place heavy objects on the cord. Make sure that no abrasions can occur on the power cord or pressure is placed on the cable. Make sure the power cord doesn't get entangled between two objects, like a piece of furniture and a wall. If any of these things happen, there's a chance of fire or electric shocks. Check the power cord regularly for such problems. Pull the power cord plug out of the socket before checking the power cable.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, make sure that all external connections (such as Ethernet and telephone system connections) are correctly placed in the marked ports.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
Safety information 7

NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
PLEASE NOTE: DANGER OF TROUBLE: Be careful when using parts with this label to avoid getting stuck between moving parts. The danger of a problem can occur near moving parts, such as gears, doors, drawers and covers.
NOTE: ROTATING FAN BLADES: To avoid the risk of injury from moving fan blades, switch off the printer and remove the power cord from the socket before approaching areas marked with this symbol.
PLEASE NOTE: RISK OF INJURY: This product uses a laser. The use of other modes, methods or procedures than those mentioned in the User's Manual may result in exposure to hazardous radiation.
PLEASE NOTE: RISK OF INJURY: The lithium battery in this product should not be replaced. If the lithium battery is not properly replaced, there is an explosion risk. A lithium battery shall not be recharged, disassembled or incinerated. Dispose of used lithium batteries as instructed by the manufacturer and keep in mind local regulations.
This product has been developed, tested and approved together with specific components of the manufacturer according to strict safety standards applicable worldwide. The safety features of certain components are not always clearly visible. The manufacturer shall not be responsible for the use of other replacement parts.
Have maintenance and repair operations not described in the user documentation carried out by a service representative.
This product uses a printing process that heats the print material. The heat can cause the printing material to release certain substances. Study the section in the operating instructions that discuss guidelines for selecting printing materials to prevent harmful emissions.
This product produces small amounts of ozone during normal use and may be equipped with a filter to keep ozone concentrations well below the recommended exposure limits. To prevent high ozone concentrations during intensive use, place this product in a well ventilated area and replace the ozone and exhaust filters if specified in the maintenance instructions of the product. If filters are not referred to in the maintenance instructions of the product, this product does not contain any filters that need to be replaced.
KEEP THESE INSTRUCTIONS.
Safety information 8

Dealing with the printer 9
Find information about the printer

Dealing with the printer 10

When placing the printer, take into account space for opening loading, valves and doors as well as installing hardware options.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.

Dealing with the printer 11
Ambient temperature 10 to 32.2 °C
Temperature for storage -40 to 43.3 °C

NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
You can configure the printer by adding optional drawers for 250, 550 or 2100 sheets. See 'Install the tray for 250 sheets or 550 sheets' on page 199 or 'Installing the drawer for 2100 sheets' at page 200 for more information.

Dealing with the printer 12



Dealing with the printer 13
2 Optional tray for 2100 sheets None
3 Frame with swivel wheels None
4 Optional tray for 550 sheet Optional drawer for 250 sheets
The finisher with non- and perforating function cannot be combined with other output options.
In a setup with two or more optional finishers:
When using optional loads:
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
Hardware option Alternative hardware option

Dealing with the printer 14

1 Power cord connection Connect the printer to an outlet.
2 USB printer port Connect the printer to your computer.
3 Ethernetport Connect the printer to a network.
4 USB port Connect a keyboard or compatible option.
Front Component

Use the control panel 15
Lexmark B2865-, MS725-,MS821-,MS823 and MS825 printers

4 Numeric keypad Enters numbers or symbols in an input field.
5 Toggle whether to turn on or off the printer.
6 Backspace button Move the cursor back and remove a character in an input field.
7 Button Stop or Cancel
Stop the current print job.
8 indicator lamp Check printer status.
9 Button Back (Back) This lets you go back to the previous screen.
10 Start screen (button) Go to the start screen.
Front Component

Use the control panel 16


3 Numeric keypad Enters numbers or symbols in an input field.
5 Stop or Cancel button Stop the current job.
8 Headset or speaker port Connect a headset or loudspeaker.
9 Button Back (Back) This lets you go back to the previous screen.

The printer is disabled or the printer's slumber mode is active.
Brandt orange The printer is in sleep mode.
Flick orange The slumber mode of the printer is active.

Set and use applications of the home screen 17

2 Queue Display all current print jobs.
3 Change language Change the language on the screen.
4 Settings Open the printer menus.
5 Eco-settings Manage the energy consumption, noise, toner and paper consumption settings.
6 Show waiting tasks Print jobs queued in printer memory.
7 USB drive Print photos and documents from a flash drive.
8 Manage a list of contacts that other applications on the printer can access.
Touch Before

Set and use applications from the home screen 18
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Device > Visible icons on the home screen.
3 Select the icons you want to display on the home screen.
4 Apply the changes.
Before using the application, do:
1 From the Images Screen Saver and slideshow section you can add, edit or delete an image.
2 Apply the changes.
1 Touch Change Background On the start screen.
2 Select the desired image.
3 Apply the changes.
1 Place a flash drive in the USB port.
2 Hit in the Home screen Slide Show On.
Images appear in alphabetical order.

Set and use applications of the home screen 19
1 Hit in the Home screen Eco Settings On.
2 Configure the Ecomode or Planning current mode.
3 Apply the changes.
We recommend that you sign in to the printer before creating a profile. For the activation of a login method, see the Embedded Web Server - Security Admin Guide.
1 Hit in the home screen Cloud Connector On.
2 Select a cloud service provider.
3 Tap Create a profile or .
4 Type a unique profile name.
5 Enter a PIN if necessary.
6 Tap Create and write down the authorization code.
7 Open a web browser and go to https://lexmark.cloud-connect.co.
8 Click on Next and then accept the terms of use.
9 Enter the authorization code and click Connect.
10 Sign in to your cloud service provider account.
11 Granting permissions.
You may need to have administrative rights in order to access the application.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Apps > Device quota > Configure.

Set and use applications from the home screen 20
3 Add or edit a user from the User Accounts section and then set up the user quota.
4 Apply the changes.
You may need to have administrative rights in order to access the application.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Apps > QR Code Generator > Configure.
4 Apply the changes.
1 Touch Customer support On the start screen.
2 Print the information or send it by e-mail.
Use bookmarks to print commonly used documents stored on servers or the web.
1 Open a web browser and type the printer IP address in the address bar.

Set and use applications from the home screen 21
2 Click Settings Bookmark Settings > Add Bookmark, and then type a unique name for the bookmark.
Limit access to the bookmark by entering a PIN.
4 Click on Save.
1 Open a web browser and type the printer IP address in the address bar.
2 Click Settings Bookmark Settings > Add Folder, and then type a unique name for the folder.
3 Click on Save.

Set and use applications from the home screen 22
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.
3 Add a contact from the Contacts section.
4 If necessary, specify a method of notification for accessing the application.
5 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.
3 Add a name of a group from the Contact Groups section.
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.

Set and use applications from the home screen 23
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.

Set and use accessibility functions 24
1 Keep the 5-key pressed until you hear a spoken message.
2 Select OK.
1 Keep the 5-key pressed until you hear a spoken message.
2 Press Tab to navigate the focus cursor to the O.R. button and then press Enter.
Twice tap Select an option or item on the screen.
Three taps Zoom in or zoom out on text and images.
Move to the right or down To the next item on the screen.
Move to the left or upstairs Go to the previous item on the screen.
Pan To go to parts of the zoomed-in image that fall outside the screen's limits.
Gebar Function

Set and use accessibility functions 25
To top and left, close an application and return to the home screen.
Up and down
Repeat a spoken text.
1 Hold the control panel 5-key pressed until you hear a spoken message.
2 Select the magnification mode.
3 Select OK.
For more information about the browsing through a larger screen, see 'Navigate on the screen with gestures' on page 24.
1 Select from the home screen Institutions > Device > Accessibility > Speech speed.
2 Select the speech speed.
Perform one or more of the following actions:
1 Select from the home screen Institutions > Device > Accessibility > Spoken passwords/pin codes.
2 Turn on the option.
Gebar Function

Paper and special printing material places 26
Set up paper type and paper size
1 Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Species > select a paper source
For printer models without touchscreen, press to navigate through the settings.
2 Set the paper size and type of paper.
1 Browse the control panel to:
Institutions > Paper > Media Configuration > Universal Setting
For printer models without touchscreen, press to navigate through the settings.
2 Configure the settings.
PLEASE NOTE: RISK OF INJURY: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
1 Remove the drawer.

2 Set the guides to the paper size you want to place.

Paper and special printing material places 27

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

4 Place the stack of paper with the print side down and make sure that the side guides are firmly against the paper.


Paper and special printing materials 28

Without optional nonfinisher With optional non finisher




Single-sided printing Double-sided print



Paper and special printing material places 29

5 Put the drawer back.
6 Set the paper size and type of paper on the control panel.
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
1 Pull the drawer out of the printer.
2 Adjust the guides.
a Pull up the width guide and slide it to the right position for A5 paper.


Place paper and special printing material 30
b Press the length guide and slide the conductor to the position for A5 paper until the conducter clicks.

c Remove the A5 length guide from the holder.

d Insert the conductor into the slot and press it until it clicks.


Paper and special printing material places 31
a Pull up the width guide and slide the conductor in the right position for the paper size you need
The Commission has already made a number of proposals.

b If the A5 length guide is still attached, remove it. Continue to step d on page 32 if
No conductor has been confirmed.

c Place the A5 length guide in the holder.


Paper and special printing material 32
d Squeeze the length guide and then slide the conductor to the right position for the size paper
You want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.
4 Place the paper stack with the print side down in the printer. • Place letterhead paper, depending on whether an optional nonfinisher is installed.
Without optional nonfinisher With optional non finisher


Single-sided printing · One-sided print

Place paper and special printing material 33
Without optional nonfinisher With optional non finisher


Single-sided printing Double-sided print


5 Put the drawer back.

6 Set the paper size and type of paper on the control panel.
Double-sided printing · Double-side printing

Paper and special printing material 34
1 Open the multifunction input.

2 Set the guide to the paper size you want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.
4 Place paper with the print side to top in the printer. • Place letterhead paper, depending on whether an optional nonfinisher is installed.
Without optional nonfinisher With optional non finisher


Single-sided printing · One-sided print

Place paper and special printing material 35
Without optional nonfinisher With optional non finisher


Single-sided printing Double-sided print


5 Set the paper size and type of paper on the control panel.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper > Load Configuration.
3 Set a paper size and type of paper that match the drawers you want to link.
4 Save the settings.
5 Click on Institutions > Device > Maintenance > Configuration Menu > Load Configuration.
6 Set the load link Automatic.
7 Save the settings.
To disconnect loading, make sure there are no two drawers with the same paper size or type of paper settings.
Double-sided printing · Double-side printing

Paper and special printing material 36

Supported paper formats

Paper Size Standard drawer for 550 sheets or optional tray for 250 or 550 sheets
A6 105 x 148 mm (4.7 x 5.8 inches) X
Statement 140 x 216 mm (5,5 x 8.5 inches) X
Universal 105 x 148 mm (4.1 x 5.8 inches) 216 x 356 mm (8.5 x 14 inches).
1 A5 imports with the long side facing forwards is preferable to A5 short-side imports.
2 Envelopes wider than 101.6 mm (4.5 inches) can wrinkle. This type of paper must be checked for suitability.
Paper support 37


Paper Size Standard drawer for 550 sheets or optional tray for 250 or 550 sheets
98.4 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 x 9.8 inches).
1 A5 imports with the long side facing forwards is preferable to A5 short-side imports.
2 Envelopes wider than 101.6 mm (4.5 inches) can wrinkle. This type of paper must be checked for suitability.

A5 short side forward 148 x 210 mm (5,8 x 8.3 inches)
Oficio (Mexico) 216 x 340 mm (8,5 x 13,4 inch)
Paper support 38


Executive 184 x 267 mm (7,3 x 10,5 inch) X X X
Folio 216 x 330 mm (8,5 x 13 inches)
105 x 148 mm (4.1 x 5.8 inches) 216 x 356 mm (8.5 x 14 inches).
7 3/4 envelope (Monarch) 98 x 191 mm (3.9 x 7.5 inches) X
DL Envelope 110 x 220 mm X
B5 Envelope 176 x 250 mm (6.9 x 9.8 inches) X
Other envelopes 98.4 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 x 9.8 inches).
Paper support 39


Paper type Standard drawer for 550 sheets or optional tray for 250 or 550 sheets
1 Print up to 20 pages to prevent the transparencies sticking together. Print the following pages after three minutes.

Paper support 40


Card stock (Karton) X X X x X X

Paper type and weight Standard drawer for 550 sheets or optional tray for
1 Paper with width-oriented fibres is preferred for paper of over 176 g/m2 (47 lb).
2Pressure sensitive area must be entered in the printer first.
3 Envelopes of 105 g/m2 shall consist only of 25% cotton.
Paper support 41


Paper type and weight Standard drawer for 550 sheets or optional tray for
1 Paper with width-oriented fibres is preferred for paper of over 176 g/m2 (47 lb).
2Pressure sensitive area must be entered in the printer first.
3 Envelopes of 105 g/m2 shall consist only of 25% cotton.

203 g/m2 longitudinal fibres X
Paper support 42


199 g/m2 length-long-range fibres X
176 g/m2 longitudinal fibres X
163 g/m2 length-long-range fibres X
180 g/m2 X
140-175 g/m2 X
75-135 g/m2 X
60–105 g/m2 X
Paper support 43

Print from a computer
1 Open the Print dialog from the document you want to print.
2 Adjust the settings if necessary.
3 Print the document.
LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lex mark printer.
1 Open the document and send or share it to Lexmark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a printing service that allows you to print on printers ready for Google Cloud Print.
Check the following before you start:
1 Open a document on your mobile AndroidTM device or select a document from your file manager.
> Print On.
3 Select a printer and touch.
Mopria® Print Service is a mobile printing solution, designed for mobile devices with Android 4.4 or later. You can directly print on any printer that is compatible with Mopra.
Print 44 · 2 Touch

1 Launch a compatible application from the home screen of your mobile device.
2 Tap Print and select the printer.
3 Send the print job.
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on printers compatible with AirPrint.
1 Launch a compatible application from the home screen of your mobile device.
2 Select an item to print and then tap the Share icon.
3 Tap Print and select a printer.
4 Print the document.
1 Place the flash drive in the printer.

2 On the display, touch the document you want to print.
Configure the other print settings if necessary.
3 Send the print job.
Print 45

To print another document, hit USB drive On.

– The printer supports high-speed USB flash drives with fullspeed standard. – USB flash drives must support the FAT (File Allocation Tables) system.
Print 46 · Documents

1 Browse the control panel to:
Institutions > Security > Print Configuration confidentially
For printer models without touchscreen, press to navigate through the settings.
2 Configure the settings.
Max. invalid PIN Set how often an invalid PING code can be entered.
Set a time-out for confidential printing tasks.
Time-limit for repeated tasks
Set the time limit for repeated printing tasks.
Time-limit for audited tasks
Set the time limit for printing one copy before the user prints the other copies.
Time-out for reserved tasks
Set a time-out for saving print jobs.
Required queue all tasks
Set the printer to queue all print jobs.
1 Open the document you want and click Stock > Print.
2 Click on Properties, Preferences, Options or Set.
3 Click on Print and Hold (Print and wait tasks).
4 Select Use print and wait and then assign a username.
5 Select the type of print job (Confidential, Repeat, Reserved or Controlled).
If the print job is confidential and enter a four-digit PIN.
Print 47 · Use For · False time secure task

6 Click on OK or Print.
1 Open the document you want and click Archive > Print.
If necessary, click on the triangle to display more options.
2 In the Print Options or menu select Number and Pages option Forwarding tasks.
3 Select the type of print job (Confidential, Repeat, Reserved or Controlled).
If the print job is confidential, assign a username and enter a four digit PIN.
4 Click on OK or Print.
1 Hit in the home screen Cloud Connector On.
2 Select a cloud service provider and choose a profile.
3 Select a file.
4 Adjust the settings if necessary.
5 Touch Print On.
Print 48

1 Browse the control panel to:
Institutions > Reports > Print > Print fonts
For printer models without touchscreen, press to navigate through the settings.
2 Select an example of a font.
Browse the control panel to:
Institutions > Reports > Print > Print Folder
For printer models without touchscreen, press to navigate through the settings.
Print 49

Printer Menu Information 50
Menu Overview
Troubleshooting • Test page

Printer Menu Information 51
Select the language of the text on the display.
Specifies the country or region in which the printer is set to work.
[List of countries or regions]
Run the installation wizard.
Select a language as keyboard type.
Specify what information is displayed in the home screen.
View Text 1 [IP address*] Display Text 2 [Date/Time*] Custom text 1 Custom Text 2
Adjust the time and date of the printer.
Current date and time Manual Date and Time Set Date notation [MM-DD-YYYY*] Time format [12 hours AM/PM*] time range [GMT*]
Configure the settings for Network Time Protocol (NTP).
Enable NTP [To*] NTP Server Verification
This will specify the size units for paper formats.
U.S.* Metric
20-100% (100*) Adjust display brightness.
Enable access to the flash drive.

Printer Menu Information 52
This enables audio feedback to be enabled for printing, panel interactions, paper loaded instructions and error messages.
This adjusts the volume of printer speakers.
5-300 (60*) Set the inactivity time in seconds before screen displays the start screen or before printer automatically unsubscribe a user.
Connect to an external VNC client (Virtual Network Computing) to run the remote control panel.
Set the authentication type when accessing the VNC client server.
Set the indicator light to light if a printer error occurs.
Set the number of times when the alarm is played when the user has to intervene.
From One Time* Continuous
Display the estimated status of the printer uploads.
Show estimates* Do not show estimates

Printer Menu Information 53
This sets the unit that the printer uses to estimate supply consumption and activate custom notifications when intervention is required by the user.
Set the number of times that alarm goes off when toner car tridge is almost empty.
From One Time* Continuous
This configures the notification settings that indicate when user intervention is required.
Custom supply notifications
Enter the IP address or host name of the primary SMTP server used to send mail.
Enter the port number of the primary SMTP server.
Enter the IP address or hostname of the secondary or backup SMTP server.
Enter the server port number of your secondary or back SMTP server.
Set the time after which a timeout occurs on the printer if the SMTP server does not respond.
Enter a reply address in the email.
Use the default SMTP response address.
Always use the default SMTP response address

Printer Menu Information 54
Send an e-mail using a coded link.
To require a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
No authentication required* Login / Normal NTLM CRAM-MD5 Digest-MD 5 Kerberos 5
Specifying or references are required for email initiated by the device.
Mail initiated by the device
Use no* SMTP references for device
Specifying or references are required for user-induced emails.
User-induced email
Do not use SMTP device references User ID/waitw. session Use session email address and password* User questions
Enable user references and group assignment to connect with the SMTP server.
Use Active Directory Device
Specify the user ID to connect to the SMTP server.

Printer Menu Information 55
Specify the password for connection to the SMTP server.
Specify the realm for Kerberos 5 verification protocol.
Specify the domain name for NTLM security protocol.
Disable an SMTP error message displayed on the screen.
Disable error message "SMTP server not set"
Set the printer to eject blank pages or partially printed pages automatically after a fixed-run page has been removed.
Allow the printer to continue processing or printing a task automatically after certain printer functions requiring user intervention have been corrected.
Off On* (5 seconds)
Set the printer to restart if an error occurs.
Restart at inactive mode Always restart* Never restart
This will set the number of times that the printer automatically restarts.
Auto Restart Limit
Set the number of seconds before automatically restarting the printer.
Window Auto Restart
Show read-only information about restart the counter.
Teller Auto Restart

Printer Menu Information 56
Teller autom. rew start up rust.
Teller autom. rew start up rust.
Set the printer to display a message when a short paper error occurs.
Show paper error too short
Set the printer to send the entire page to memory before printing the task.
Restore content after failure
Set the printer to reprint pages that have been blocked.
Allow printing when the display is disabled.
Print while the display is off
Enable display while printing Print while the display is off*
Set after how much time to be inactive the printer switches to sleep mode.
This will set up the printer after how much time it switches to slumber mode.
Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month

Printer Menu Information 57
Set the printer to slumber mode even if there is an active Ethernet connection.
Snooze timeout on connection
Do not enable sleep mode*
Minimize the use of energy, paper or special printing material.
Out* Energy Energy/paper Paper
Schedule when the printer's sleep or slumber mode is activated.
Information sent to Lexmark
Send information about printer usage and performance to Lexmark.
Use of supplies and pages (anonymous) Device performance (anonimal) None of the above
Only anonymous session info* Session information with general user information Session information containing specific user IDs
0-5 (0*) Set in seconds how long the printer ignores double keystrokes on a locked keyboard.

Printer Menu Information 58
Time until key is repeated
0.25-5 (1*) Set the initial delay for repeated keystroke in seconds.
Set the number of attacks per second for a repeated keystroke.
Allow the user to stay in the same location and reset the Screen timeout when it has expired, instead of returning to the start screen.
1-10 (5*) Adjust the volume of headphones.
Shape the spoken guidance when a headphone is connected
Enable the spoken guidance when headphones are connected to the printer.
Set the printer to voiced passwords or personal ID numbers.
Set the speech speed of spoken guidance.
Very slow Slow Normal* Fast Faster Very fast Superfast Extremely fast Fastest
Restore the printer's default settings.
Restore All Settings Recover Printer settings Restore Networking Settings

Printer Menu Information 59
Configuration Menu
Change the printer's USB driver mode to improve compatibility with a PC.
Set the USB port to run at full speed and disable its high-speed functions.
Set the printer to detect the size of the paper placed in the drawer.
Set the printer to have the same settings for paper type and paper size.
Set the printer to send a message Housing The following are the main causes of this problem:
Show message entry tray placed
Out Only for Unknown Formats* Always
Specify the page's print position while placing A5 paper.
Short side Long side*
Set the paper source to be filled when a message is displayed in order to place paper.
Auto* Multifunction input Hand input
Set the paper source to be filled when a message is displayed in order to place envelopes.
Auto* Multifunction input Handm. input envelope

Printer Menu Information 60
Set the printer to resolve notifications about changing paper or envelopes.
User Questions* Continue Using Current
Print reports about printer settings, printing events and event logs.
Page Menu Settings Event Log Summary eventlog HealthCheck statistics
Consumption and counters of supplies
Clear the supply page counter or display the total number of pages printed.
Clear supply usage history
Set the printer to recognize and use the PPDS data stream.
Set a value for the text size under which high frequency displays are used when printing font data. For example, if the value is 24, all high frequency fonts of 24 points or fewer screens are used.
Adjust the toner density for printing or copying documents.
Choose the desired fuser.
Set the printer to operation in Silent mode.
Access the control panel menus.
Set the memory assignment for storing copy tasks.

Printer Menu Information 61
Set the printer to work in a special mode, which tries to provide as much functionality as possible despite known problems.
If this option is turned on and the duplex engine does not work, for example, the printer will print one-sidedly even if double-sided printing is enabled for that task.
Clear user-defined strings for default or alternative custom messages.
Clear messages that are installed externally.
Clear all remotely installed messages
Show existing error messages on screen after the printer remains inactive on the start screen during time of setting Time-out.
Fault screens autom. show
Enable an optional parallel port.
Activate the optional parallel port.
Enable the Lexmark Embedded Solutions (LES) applications.
Show when the printer memory or hard drive was last cleaned up.
Memory last cleaned Fixed disk last cleaned
Clear all the settings and applications stored in printer memory and on printer hard drive.
Clean all data in non-volatile memory
Clear all printer and network settings Clear All apps and app settings Clean all data on hard drive

Printer Menu Information 62
Status/Supplies Queue Change Language Address Bookmarks Waiting Tasks USB App Profiles Display Customization Eco Settings
Specify which icons are displayed in the home screen.
Feature tag Displays the printer serial number.
Printer Location Identifys the printer's location. The maximum length is 63 characters.
Contact Adjust the printer name. The maximum length is 63 characters.
Export configuration file to USB Export configuration files to a flash drive.
Export Compressed Log Files to USB
Export compressed log files to a flash drive.
This will determine whether to print on one side or two sides of the paper.
Determine which side of the paper (long side or short side) is bound when printing double-sided.
Long side* Short side
Blank pages prints that are included in a printing job.
This will stack the pages of a print job in order if you print multiple copies of the task.
Uit [1,1,1,2,2,2]* Aan [1,2,1,2,1,2]

Printer Menu Information 63
Insert empty separation sheets while printing.
None* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) Multifunction input
Print multiple page binders on one side of the paper.
From* 2 pages per side 3 pages per silk 4 pages per page 6 pages per face 9 pages per sides 12 pages per lace 16 pages per edge
Pages by side - sorting
Specify multiple page positioning when using Pages per side.
Horizontal* Reverse horizon. Vertical Conversely Vertical
Pages per side - Print Mode
Specify the print position of a multi-page document when using Pages per side.
Pages per side - border
Print a border around each page when using Pages per side.
1-9999 (1*) This gives the number of copies for individual printing tasks.
Set the printable area of a sheet of paper.
Normal* Fit on page Whole page

Printer Menu Information 64
Configure the printer language.
Hold on to tasks requiring supplies and print tasks for which these supplies are not required.
0.255 (30*) Set how many seconds the printer waits for an action from the user before the tasks that require non-available resources are put on hold and other tasks in the print queue.
Specify where all permanent sources, such as fonts and macros downloaded to the printer, should be stored.
Specify what the printer does with sources loaded into memory, such as fonts and macro-images, if there is insufficient memory for a print job.
Print order for everything
Specify the order in which held and confidential tasks are printed when All Prints is selected.
Alphabetical* Newest task as first Oldest job
Set the resolution for text and images to the printed output.
300 dpi 600 dpi* 1200 dpi Image quality 1200 Image quality 2400

Printer Menu Information 65
Allow more pixels to be printed as cluster in order to improve text and images.
Off* Fonts Horizontal Vertical Both directions
1.1.310 (8*) Determining the brightness or darkness of images with text.
Improve printing, so that these smoother lines have sharper edges.
Adjust the brightness of the printed output.
‑6 tot 6 (0*)
0 to 5 (0*) Adjust the contrast of the printed output.
Adjust the contrast enhancement applied to images.
Set the printer to log in for the received print jobs.
Specify how often the printer makes a log.
Action log file at end of frequency
Set how the printer reacts at the end of the specified frequency.
None* E-mail current log file Email and delete Current log file Place and remove Current logfile
Log level almost full
Specify how large the log file can be before running action at Actionlog at almost full.

Printer Menu Information 66
Action log at almost full
Specify how the printer reacts when hard drive is almost full.
None* E-mail Current Log File Email and Remove Oldest log file emails and delete Place & Delete Current Log file Post and remove Oldest Log File Delete current log file Delete oldest logfile Delete all except present log file Remove all log files
Specify how the printer reacts when maximum disk usage is reached (100 MB).
None* E-mail and delete current log file E-Mailing and Remove Oldest log file Post and Delete Current log file Place and remove oldest logfile Delete existing log file Delete all except present log file Remove all log files
URL to log Verst. Specify where the logs are placed.
Email address for sending log files Enter the email address to which the task admin log files are sent.
Prefix logfile Specify the prefix for log name.
Error pages after
Print a test page with error information, including XML markup errors.
1-30 (2*) Set the minimum width of a linepiece to a task that is printed in 1200 dpi.

Printer Menu Information 67
Scale page contents so that it fits the selected paper size.
Specify whether to print annotations in the PDF file.
Print a page with the PostScript error.
Disable the PostScript SysStart file.
Set how long the printer waits for more data before a print job is cancelled.
Select the source that contains the default font selection.
Internal* Disk Flash Memory Everything
Select a font from the given font source.
[List with available letter types] (Courier*)

Printer Menu Information 68
Display the symbol set for each font name.
[List with available symbol sets] (10U PC-8*)
0.08-100 (10*) Specify the fixed (monospapiated) font pitch.
Set the print mode of text and images on the page.
1.1.7255 Specify the number of text lines for each page printed via PCL® data stream.
1-30 (2*) Set the first minimum line width.
This sets the width of the logical page for A4 paper.
198 mm* 203 mm
Automatic HR after NR
Set the printer to perform a hard return after command for a new line.
Automatic NR after HR
The printer executes a new line after the command for a hard return.
Tray No modify
Configure the printer for use with another printer driver or custom application using a different set of allocations to request a particular paper source. Choose from the following options:
Value U-loader Value tray [x] Value handm. input Value envelope (handm.)
0.0.7199: a numerical value that you assign as an adjusted value to a paper source. 200: The printer uses the factory settings for the paper source. 201: the paper source ignores the command to select the paper input.
Tray No modify
Display the factory value for each paper source.

Printer Menu Information 69
Tray No modify
Put the drawer numbers back to factory values.
Set the printer to stop a job after it is inactive for a certain time (in seconds).
Set the font to use for HTML documents.
[List with fonts] (Times*)
1-255 (12*) Set the font size to be used for HTML documents.
1.0.3400% (100*) Scale HTML documents.
Set the print mode for HTML documents.
8.0.7255 mm (19*) Set the page margin for HTML documents.
Print background information or images for HTML documents.
Autom. customize
Select the best available options for paper size and image print mode.
Turn two-colored black and white images.

Printer Menu Information 70
Adjust the image so it fits into the printable area.
Anchor Left top corner Most similar* Center anchor Hgte/width matching Adjust height Adjust width
Set the print mode of text and images on the page.
Standing* Facing facing facing facing standing in reverse
Set the paper source for all printing tasks.
Loader [x] (1*) Multifunction input Manual paper entry Manual envelope entry
Specify the paper size or type of paper loaded into each source.
Loading [x] Multifunction input Manual paper entry Manual envelope entry
Set the printer to replace a specified paper format when the desired size is not placed in the paper source.
From Letter/A4 All in list*

Printer Menu Information 71
Set when the printer enters paper that is placed in multifunctional input.
Universal Setting
Specify the units of measurement for Universal paper.
Set the width of standing Universal paper.
Set the height of standing Universal paper.
Set the printer to enter it from the short side or long side.
Short side* Long side

Printer Menu Information 72
Normal Cardboard Transparency Circuit Labels Vinyl labels Bank post Envelope Raw envelope Letterhead Preprinted Coloured paper Light Heavy Raw/cotton Customized [x]
Specify the texture, weight and print position of the paper placed.
1-9999 (1*) Enter the desired number of copies.
Specify the paper source for the print job.
Loader [x] (1*) Multifunction input Manual paper entry Manual envelope entry
Print multiple copies in a row.
This will determine whether to print on one side or two sides of the paper.
Determine which side of the paper (long side or short side) is bound when printing double-sided.
Long side* Short side

Printer Menu Information 73
Print multiple page binders on one side of the paper.
Out* [n] pages per side
Pages by side - sorting
Specify multiple page positioning when using Pages per side.
Horizontal* Reverse horizon. Vertical Reverse
Pages per side - Print Mode
Specify the print position of a multi-page document when using Pages per side.
Pages per side - border
Print a border around each page when using Pages per side.
Specify whether to insert empty separation sheets during printing.
Out* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) Multifunction input
Set whether to print empty pages in a job.
Specify how a network is connected.
Network status Displays the connection status of the printer network.
Display network status on printer
Displays network status on screen.

Printer Menu Information 74
Speed, duplex Displays the speed of currently active network card.
IPv4 Displays the IPv4 address.
All IPv6 Addresses Displays all IPv6 addresses.
Reset Print Server Reset all active network connections to the printer.
This allows you to set up after how much time a network print job is canceled.
Off On* (90 seconds)
Print a front page.
Configuration via the mobile app Configure the Wi-Fi connection using Lexmark Mobile Assistant.
Set up on the printer's control panel
Configure the Wi-Fi connection via the control panel.
Choose Network Add Wi-Fi network
Infrastructure Security mode for wireless
Disabled* WEP WPA2/WPA - Personal WPA2 - Personal 802.1x - RADIUS
Wi‑Fi Protected Setup
Set up a Wi-Fi network and enable network security.
Start method with push button Starting method with pincode

Printer Menu Information 75
Set network mode.
Wi‑Enable Fi Direct
Set Wi-Fi Direct devices to connect directly to the printer.
Please specify the standard Wi-Fi network usage for the wireless network.
802.11b/g/n (2.4 GHz) * 802.11.a/b/w/n/ac (2.4GHHHh) 802.10a/n-ac (5 GHz)
Set the security mode to connect the printer to Wi-Fi devices.
Disabled* WEP WPA2/WPA - Personal WPA2-Personal 802.1x - RADIUS
Set the type Wireless Encryption Protocol (WEP) for the printer.
Set WEP Key Please enter a WEP password for secure Wi-Fi connection.
Set Wi-Fi connection via Wi-fi Protected Access (WPA).
Set pre-share key Set the password for a secure Wi-Fi connection.
Set up Wi-Fi connection via WPA2.
802.1x Encoding Mode WPA+ WPA2*
Set Wi-Fi connection via the standard 802.1x.
Enable Dynamic Host Configuration Protocol (DHCP) and configure the static IP address.
To* Set from Static IP Addresses

Printer Menu Information 76
Enable and configure the IPv6 settings in the printer.
Enable * From DHCPv6
On Out* Stateless Address Autoconfiguration
To* From DNS server address Manually assigned IPv6 address Manual allocated IPv6-router Address prefix All IPv4 addresses All IP v6 routers
Show the network addresses.
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Temporaryly save print jobs to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.

Printer Menu Information 77
Network Speed Display the speed of an active network adapter.
Enable Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of your printer.
Enable IPv6 on the printer.
Enable DHCPv6 on the printer.
Set the network adapter to accept IPv6 addresses automatically configured by a router.
Enter the DNS server addresses.
Align the IPv6 address.
Align the IPv6 address.
Please specify the address prefix.
Displays all IPv6 addresses.
Displays all IPv6 router addresses.
Display the printer's MAC (Media Access Control) addresses: Locally Administered Address (LAA) and Universally Adminised Address (UAA).

Printer Menu Information 78
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Save print jobs temporarily to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.
Limit power consumption if the printer does not receive data from Ethernet network.
Set host name Set the current TCP/IP hostname.
Domain Name Set the domain name.
Allow DHCP/BOOTP to update the NTP server
Allow DHCP and BOOTP clients to update the printer's NTP settings.
Configuration-free program name Specify a service name for the configurationless network.

Printer Menu Information 79
Automatically assign an IP address.
DNS Server Address Specify the current DNS server address (Domain Name System).
Backup DNS address Specify the backup DNS server address.
Domain search order Specify a list of domain names to search for the printer and sources that are located in different domains on the network.
Update the dynamic DNS settings.
Update multicast DNS settings.
WINS Address Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign an IP address of the printer.
Limited Server List Specify an IP address for the TCP connections.
Limited Server List Options
Specify how IP addresses in the list can access printer functions.
Block all ports* Block only prints Only print and block HTTP
1-65535 (9100*) Specify a raw port number for printers connected to a network.
Maximum speed of outgoing traffic
Set the printer to maximum transfer speed.

Printer Menu Information 80
Enable the SSLv2 protocol.
Enable the SSLv3 protocol.
Enable TLSv1.0
Enable the TLSv1.0 protocol.
Enable TLSv1.1
Enable the TLSv1.1 protocol.
SSL Encoding List Specify cipher algorithms to be used for SSL or TLS connections.
SNMP versions 1 and 2c
Configure SNMP versions 1 and 2c (Simple Network Management Protocol) for installing printer drivers and applications.
Allow off* Setup SNMP
Enable Out* PPM MIB

Printer Menu Information 81
Configure SNMP version 3 for installing and updating the printerbe- security.
Off To* Set Read/Write References
User Name Password Set Read-only References
User Name (Username) Password Verification hash
MD5 SHA1* Minimum level of verification
No verification, no privacy Verification, no Privacy Verification, privacy* Privacy algorithm
Enable Internet Protocol Security (IPSec).
Specify the IPSec base configuration.
Specify the IPSec encoding.
modp2048 (14)* modp3072 (15) modp4096 (16) modp6144 (17)

Printer Menu Information 82
Specify the encryption and verification methods to connect safely to a network.
IKE SA life (hours)
Set the amount of time before a new verification code is generated.
1 2 4 8 24*
IPSec SA life (hours)
1 2 4 8* 24
IPSec Device Certificate Specify an IPSec certificate.
Verified connections with pre-shared key
Configure the verified connections of the printer.
Verified links of certificate
Allow the printer to access networks that require verification.

Printer Menu Information 83
0.7.65535 seconds (90*) Set the time-out value to stop the LPD server (Line Printer Daemon) from waiting infinitely for blocked or invalid printing tasks.
Print a front page for all LPD print jobs.
Print an info page for all LPD print jobs.
Enable LPD line rundown conversion.
Go to the Embedded Web Server to monitor and manage the printer.
Configure the HTTPS settings (HyperText Transfer Protocol Secure).
Force the printer to use HTTPS connections.
Send files via FTP.
Local domains Specify domain names for HTTP and FTP servers.

Printer Menu Information 84
HTTP proxy IP address Configure the settings for the HTTP and FTP server.
1-299 (30*) Specify the amount of time before the server connection is terminated.
Nwe pog. for HTTP/FTP requests
1-299 (3*) Set the number of new attempts to connect to the HTTP/FTP server.
Print from ThinPrint.
4000-4999 (4000*) Set the port number for ThinPrint server.
100-1000000 (0*) Specify the speed at which data is transmitted in a ThinPrint environment.
0-64000 (0*) Set the data transfer package size.
Set the printer to switch to PCL emulation if required by a print job on the USB port, regardless of default printer language.
Set the printer to switch to PS emulation if required by a print job on the USB port, regardless of default printer language.

Printer Menu Information 85
Save print jobs temporarily to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.
Enable the default USB port.
Register the printer on Google Cloud Print server.
Print directly from your Google account.
Provide the registered user and other users on the same subnet to send locally tasks to the printer.
Check the authenticity of peer certificate to connect with your Google account.
Set the printer to process PDF files as an image for faster printing.
Always print as an image.

Printer Menu Information 86
SSID Specify the service set identifier (SSID) of the Wi-Fi network.
Set pre-share key Set the pre-shared key (PSK) for verifying and validating users on a Wi-Fi connection.
Show PSK on Settings Page
Show the PSK on the network settings page.
Group owner IP address Specify the group owner's IP address.
Automatically accept requests to connect to the network.
Manage authorisations
Manage access to printer functions.
Customize Address Book Profiles Manage Bookmarks Print flash drive Access to tasks pending Cancel user profiles Change device tasks Change language Internet Printing Protocol (IPP) Print black and white
Manage access to printer menus.
Menu Security Menu Network/Ports Menu Paper Menu Reports Function Configuration Menus Accessories, Menu Menu Option Card SE menu Device Menu

Printer Menu Information 87
Set access to printer management options.
Remote management Firmware updates App configuration Lock Control Panel Clear all settings im/export Old device
Manage access to the printer applications.
New apps Slide Show Change Background Screen Saver Eco Settings
Manage access of groups or users to printer functions, applications and security settings.
Access to Functions Manager Menus Device Management Apps All Users
Access to Functions Manager Menus Device Management Apps Management
Create local accounts to manage access to printer functions.
Username/password UserName (Username) Password Pincode

Printer Menu Information 88
Specify the default login method for accessing the control panel.
Username/password Username Password PIN
Specify the default login method for browser access.
Username/password Username Password PIN
Schedule access to USB ports.
Record events in the secure control log and external system log.
Send control logs to a remote server.
External system log server Specify the remote system log server.
1-65535 (514*) Specify the external system log port.
Specify a system log method for transferring recorded events to an external server.

Printer Menu Information 89
Specify a facility code that the printer uses when sending log events to an external server.
0 - Kernel Messages 1 - User Level Messages 2 - Mail System 3 - System daemons 4 - Security/Authorisation Messages* 5 - Messages are generated internally by syslogs 6 - Network subsystem 8 - Network subsystems 8 - UUCP 9 - Clockdaemon 10 - Security-/AUTHORIZATION Messages 11 - FTP daemon 12 - NTP subsystem 13 - Log control 14 - Login 15 - Clocamon 16 - Local usage 0 (local0) 17 - Local use 1 (local1) 18 - Local Use 2 (local2) 19 - Local Usage 3 (local3) 20 - Local uses 4 (local4) 21 - Local users 5 (local5) 22 - Local consumption 6 (local6) 23 - Local user 7 (local7)
Sensation of events recorded
Specify the priority level limit for recording messages and events.
External system log of unregistered events
Send all events to the remote server, regardless of urgency level.
Administrator's Email Address Send email notification about registered events to the administrator.
Send mail notification to the administrator when a login is deleted.
Send email notification to the administrator when the log is full and starts overwriting the oldest items.

Printer Menu Information 90
Behavior at log full
Resolve storage problems with log when the log has used its assigned memory.
Retreat Oldest Items* Log Email and Remove All Items
Send email notification to the administrator when a log uses the assigned memory.
Send mail notification to the administrator when a log is exported.
Send mail notification to the administrator when Enable Check is enabled.
Specify how each line is terminated in a log.
LF (\n)* CR (\r) CRLF (\R\n).
Add a digital signature to every imported log.
Clear Log Delete all control logs.
Export a security log to a flash drive.
Syslog (RFC 5424) Sysalog (RF C 3164) CSV
1.1.310 (3*) Specify the number of failed login attempts before blocking a user.
Time frame for failed attempts
1.7.260 minutes (5*) Specify the time period between failed login attempts before locking the user.
1.10.1960 minutes (5*) Specify the duration of lockdown.
1.1.1120 minutes (10*) Specify the delay for an external login before user is automatically unsubscribe.

Printer Menu Information 91
Max. invalid PIN
2.10.310 Set how often an invalid PIN can be entered.
Set a time-out for confidential printing tasks.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Time-limit for repeated tasks
Set the time limit for a print job you want to repeat.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Time-limit for controlled tasks
Set the time limit for printing a copy for the user to check quality before the user prints the remaining copies.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Time-out for reserved tasks
Set a time-out for saving print jobs to print at a later date.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Required queue all tasks
Set the printer to queue all print jobs.
Set the printer to print other documents with the same file name without overwriting existing printing tasks.

Information about the printer menus 92
Stored in internal memory
Delete all files stored in printer memory.
Search the various servers in the domain on the account of the registered user.
Enable LDAP certificate verification.
Determining whether disk encoding is enabled.
Start Encoding Avoid loss of sensitive data in case of theft of printer or hard drive.
Enable airprint.

Printer Menu Information 93
Display all functions protecting Function Access Management (FAC) regardless of the security clearance that the user has.
Allow the user to log in before printing.
Set the default login data for Print Authorization.
Username/password* User Name LDAP solutions
Jumper for reset bevei-liging
Specify the effect of using the jumper for hardware security.
Enable access for 'Guest'* No effect
0-32 (0*) Specify the minimum number of characters required for a password.
Page Menu Settings Print a report with printer preferences, settings and configurations.
Device Data Print a report with information about the printer.
Device statistics Print a report on printer usage and supply status.
Profile List Print a list of profiles stored on the printer.
Assets report Print a report with the serial number and model name of the printer.

Information about the printer menus 94
Print examples and information about the fonts available in each printer language.
Print Directory Print the sources stored on the flash drive or on the hard disk of the printer.
Print a page that shows the printer's capabilities and supported solutions.
Pag. Network in-stell.
Print a page with the network settings and wireless network confi-gured on the printer.
Print all manuals This prints out all guides and manuals.
Help print mat. Contains information on the placement of paper and special printing material
Print Quality Guide Contains information on how to solve printing quality problems.
mono-quality guide Contains information about settings for mono-print quality
Information Contains more information about the printer
Connection Guide Contains information about connecting the printer via USB (local) or to a network.
Help in transport Contains information about moving, locating or sending the printer
Help with supplies Provides information about ordering supplies
Test page Print sample pages to identify and correct defects in the print quality.

Information about the printer menus 95
Browse the control panel to:
Institutions > Reports > Page with menu settings
For printer models without touchscreen, press to navigate through the settings.

The printer has a locking function. At the specified location, confirm a security lock compatible with most laptops to lock the printer in place.

To erase volatile memory or buffered data in your printer, you need to disable the printer.
To erase non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Browse the control panel to:
Institutions > Device > Maintenance > Clear Old Device > Clean all information on non-volatile memory
For printer models without touchscreen, press to navigate through the settings.
2 Depending on your printer model, select CLEAR or Continue.
3 Follow the instructions on the display.
1 Browse the control panel to:
Institutions > Device > Maintenance > Clear Old Device > Clean all information on hard drive
For printer models without touchscreen, press to navigate through the settings.
2 Depending on your printer model, select CLEAR or Continue.
3 Follow the instructions on the display.
Secure printer 96

This process removes the entire contents of the hard drive. If necessary, back up important data from the printer before starting coding.
1 Browse the control panel to:
Institutions > Security > Disc Encoding > Start Encoding
For printer models without touchscreen, press to navigate through the settings.
2 Follow the instructions on the display.
1 Browse the control panel to:
Institutions > Device > Reset Factory Settings
For printer models without touchscreen, press to navigate through the settings.
2 Choose the settings you want to restore from the Settings menu.
3 Select RECOVER.
4 Follow the instructions on the display.
The printer uses standard RAM (Random Access Memory) to buffer user data during simple printing and copying tasks.
The printer may use two types of non-volatile memory: EEPROM and NAND (flash-remember). Both types are used for the storage of operating system, printer settings, network information, scanner and bookmarking settings and embedded solutions.
Hard drive Some printers may have installed a hard disk. The printer's hard drive is designed for printer-specific functions. With the hard disk, printer can store buffered user data for complex printing tasks and form and font data.

In the following cases, you must delete the contents of your printer memory:
Secure printer 98

1 Browse the control panel to:
Institutions > Device > Preferences > Audio Feedback
2 Adjust the volume.
1 Browse the control panel to:
Institutions > Device > Preferences
2 Adjust the volume of headphones.
Maintaining printer 99

1 In the start screen, browse for:
Institutions > Network/Ports > Wireless
For printer models without touch screen, press to navigate through the settings.
2 Select Set up on the printer's control panel and follow the instructions on display.
1 Depending on your mobile device, you download the Lexmark Mobile Assistant application from Google Play store or App Store online store.
2 Browse the control panel to:
Institutions > Network/Ports > Wireless > Configuration via the mobile app > Continue for printer ID
For printer models without touch screen, press to navigate through the settings.
3 Start the application from your mobile device and then accept the terms of use.
4 Granting permissions.
5 Tap Start Wi-Fi Configuration and select the printer.
6 Select a Wi-Fi network and then enter your login data.
7 Tap Complete Wi-Fi Configuration.
Check the following before you start:
Maintaining printer 100

1 Browse the control panel to:
Institutions > Network/Ports > Wireless > Wi-Fi Protected Setup > Start a push-button method
2 Follow the instructions on the display.
1 Browse the control panel to:
Institutions > Network/Ports > Wireless > Wi-Fi Protected Setup > Start PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and type the IP address of the access point in the address bar.
4 Open the WPS settings. For more information, please refer to the documentation provided at the access point.
5 Enter the eight-digit PIN and save changes.
1 Browse the printer's control panel to:
Institutions > Network/Ports > Network Overview > Active adapter > Standard networks
For printer models without touchscreen, press to navigate through the settings.
2 Follow the instructions on the display.
1 Open the printer folder.
2 In the printer's quick menu with the new ISP, open Printer Properties.
Maintaining printer 101

3 Configure the port in the list.
4 Update the IP address.
5 Apply the changes.
1 Via System Preferences in the Apple menu, navigate to the list of printers and then select + > IP.
2 Type the printer's IP address in the address bar.
3 Apply the changes.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
1 Turn off the printer and pull the plug on the power cord of the printer from the socket.
2 Remove all the paper from the standard tray and multifunctional input.
3 Clean the printer with a soft brush or vacuum cleaner to remove dust, ink ribbon and pieces of paper in and around the printer.
4 Wipe the outside of the printer with a damp, soft, lint-free cloth.
5 Connect the power cord plug to the socket and turn on the printer.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Maintaining printer 102

If you want to order parts and supplies in the US, call Lexmark on 1-800-539-6275 for information about authorized dealers of Lexmarket supplies around you. In other countries or regions you will go to www.lexmark.com, or contact the store where you bought the printer.
1 Browse the control panel to:
Institutions > Reports > Device > Device statistics
For printer models without touchscreen, press to navigate through the settings.
2 Check the status of parts and supplies in the Supply Data section on the printed pages.
Your Lexmark printer works best with original Lex Mark parts and supplies. When you use supplies or parts of other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device. It may also affect your guarantee. Damage caused by the use of parts or supplies from other manufacturers is not covered by the warranty. All life indicators are designed to function with Lexmark components and supplies. If you use parts or supplies from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended life span can damage your Lexmark printer or its parts.
Maintaining printer 103


1 Only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.
2 Only supported by the Lexmark MS725, MS823, MS825 and MS826 printer models.

Maintaining printer 104



3 Only supported by the Lexmark MS725, MS823, MS825 and MS826 printer models.
Extremely low print coverage over longer periods can cause parts of the image processing unit to break before the toner runs out.

* This image processing unit is only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.
Ordering a maintenance kit
Open valve A and remove the toner cartridge and image processing unit to determine the type of heating station. You will find the type of heating station consisting of two digits at the front of the heating station, for example 00 or 01.
Maintaining printer 105 · Article name Article number · Non-cassette 35S8500

Normal maintenance kit for heating station
Roller maintenance kit
Roller maintenance kit for printer engine 41X2352
1 Open a web browser and type the printer IP address in the address bar.

2 Click on Institutions > Device > Notifications.
3 In the Supply menu, click on Custom supply notifications.
4 Select a notification for each component.
5 Apply the changes.
1 Open valve A.

2 Remove the used toner cartridge.

Printer maintenance 107

3 Remove the new toner cartridge from the package and shake it well to distribute the toner.

4 Place new toner cartridge

5 Close the valve.
1 Open valve A.
Printer maintenance 108

2 Remove the toner cartridge.

3 Remove the used image processing unit.

4 Remove the new image processing unit from the packaging and shake it to distribute the toner.

Maintaining printer 109


5 Remove the packaging material.
6 Place the new image processing unit.

7 Place the toner cartridge.
8 Close the valve.
1 Open valve C.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
Maintaining printer 110


2 Unlock the heating station.

3 Remove the used heating station.

4 Remove the new heating station from the packaging.
Printer maintenance 111

5 Press the new heating station in until it clicks.

6 Lock the heating station.

7 Close the valve.
Maintaining printer 112

1 Remove the valve from the standard drawer.

2 Open valve C.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
Printer maintenance 113

3 Unlock the heating station with roller.

4 Remove the used heating station with roller.

5 Remove the new heating station with roller from the packaging.
6 Place the new heating station with roller until it clicks.

7 Lock the heating station with roll.

8 Close the valve.
Maintaining printer 114

9 Install the standard drawer valve.

1 Open valve A.
Maintaining printer 115

2 Remove the toner cartridge.
3 Remove the image processing unit.

4 Remove the used transfer scroll.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
Maintaining printer 116


5 Unpack the new transfer scroll.
6 Place the new transfer roller until it clicks.

Maintaining printer 117

7 Place the image processing unit.
8 Place the toner cartridge.
9 Close the valve.
1 Remove the drawer.
Maintaining printer 118

2 Remove the used grab roller.

3 Remove the new grab roller from the package.
4 Install the new grab roller.

5 Put the drawer back.
1 Open the multifunction input.
Printer maintenance 119


2 Remove the used grab roller.

3 Remove the new grab roller from the package.
Maintaining printer 120

4 Install the new grab roller.

5 Close the universal charger.
Maintaining printer 121

1 Open valve F.

2 Remove the non-cassette holder.

3 Remove the empty non-cassette.

Printer maintenance 122

4 Place the new non-cassette.

5 Place the non-cassette holder.
6 Close the valve.
1 Depending on the non-cassette that needs to be replaced, open valve F or G.

Maintaining printer 123

2 Remove the non-cassette holder.
3 Remove the empty non-cassette.
4 Place the new non-cassette.
5 Place the non-cassette holder.
6 Close the valve.
Maintaining printer 124

PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:
Transport the printer.
For shipping instructions, go to http://support.lexmark.com or contact customer support.
Printer maintenance 125

For printer models without touchscreen, press to navigate through the settings.
1 Browse the control panel to:
Institutions > Device > Energy management > Ecomode
2 Pick an institution.
1 Browse the control panel to:
Institutions > Device > Energy management > Time-outs > Sleep Mode
2 Specifying the amount of time must pass before the printer switches to sleep mode.
1 Browse the control panel to:
Institutions > Device > Energy management > Time-outs > Sleep timeout
2 Specifying the amount of time must pass before the printer switches to sleep mode.
1 Browse the control panel to:
Institutions > Device > Preferences
For printer models without touchscreen, press to navigate through the settings.
2 Adjust the setting in the Brightness menu of the screen.
Printer maintenance 126 · Eco‑mode

You return Lexmark products for reuse as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Lexmark is constantly aiming to minimise packaging material. Less packaging helps to transport Lexmark printers in the most efficient and environmentally friendly way, and reduces the need for waste. This results in less greenhouse gas emissions and savings of energy and natural resources. Lexmark offers recycling of packaging material in some countries and regions. For more information, please visit www.lexmark.com/recycle and then choose your country or region. Information on available recycling programmes of packaging material is included in the product recycling information.
Lexmark boxes are 100% recyclable when facilities for recycling cardboard are available. Such facilities may not exist in your area.
The Styrofoam used in Lexmark packaging material is recyclable when facilities are available. Such facilities may not exist in your area.
When you return a cartridge to Lexmark, use the box in which the cartridge was originally delivered. This box is recycled by Lexmark.
With the Lexmark Cartridge Collection Program, you can return used cartridges to Lex Mark for free for reuse or recycling. One hundred percent of empty cartridges returned to Lexmark are reused or processed for recycling. The boxes used to return the cartridges are also recycled.
Lexmark cartridges can be returned for reuse or recycling as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Maintaining printer 127

Preventing paper failures
Paper is correctly placed Paper is not correctly placed



Resolve paper failures 128


– If the extension of the tray is shorter than the size of the paper on which you print, it will
paper in the mailbox tray. For example, if you print or Legal-size paper and the extension of the drawer is aligned to the Letter format, the paper will be stuck. – If the extension of the tray is longer than the size of the paper on which you print, then
the edges are uneven and the paper is not stacked correctly. For example, if you print or write Letter format paper and extender tray is set to Legal format, the paper is not stacked correctly. • If paper has to be returned to the mailbox tray, place it under the drawer arm and push back completely.

Paper failures remedy 129

Paper failures remedy 130


1 Tray finisher or output option
6 Backgate finisher or output option

1 Remove the drawer.

2 Remove the stuck paper.

3 Put the drawer back.
1 Open valve A.
Paper failures remedy 132

2 Remove the toner cartridge.
3 Remove the image processing unit.

Paper failures remedy 133

4 Pull out the duplex unit.

5 Remove the stuck paper.

6 Place the duplex unit.
7 Place the image processing unit.
Resolve paper failures 134

8 Place the toner cartridge.
9 Close the valve.
1 Open valve C.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
2 Remove the stuck paper from the following locations:
Resolve paper failures 135




3 Close the valve.
Remove the stuck paper.
Resolving paper failures 136


1 Remove the paper from multifunctional input.

2 Remove the stuck paper.
3 Bend the paper, fan it out and align the edges before inserting it into the printer.
4 Replace the paper in the printer.

Resolve paper failures 137

1 Open valve K.

2 Remove the stuck paper.

3 Close the valve.
1 Open valve L.

2 Remove the stuck paper.
Resolve paper failures 138


3 Close the valve.
1 Open valve N.

2 Remove the stuck paper.

Paper failures remedy 139

3 Close the valve.
Remove the stuck paper.

1 Open valve H.

2 Remove the stuck paper.
Resolve paper failures 140


3 Close the valve.
Remove the stuck paper.

1 Open valve P.

Resolve paper failures 141

2 Remove the stuck paper.

3 Close the valve.
Remove the stuck paper.

1 Open valve F.
Resolving paper failures 142

2 Remove the non-cassette holder.
3 Remove the loose staples.

Resolving paper failures 143

4 Press the staples against the metal bracket.


5 Press the non-cassette holder until it clicks.

6 Close the valve.
Paper failures remedy 144

1 Depending on the location of the staple failure, open valve F or G.
2 Remove the non-cassette holder.
Resolve paper failures 145

3 Remove the loose staples.
4 Press the staples against the metal bracket.
Resolve paper failures 146

5 Press the non-cassette holder until it clicks.
6 Close the valve.
Resolve paper failures 147

Network connection problems
Go to step 2. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Go to step 3. Type the correct IP address of the printer in the address bar.
Make sure the printer's IP address is correct.
Display the printer's IP address:
Is the printer's IP address correct?
Go to step 4. Install a under-supported browser.
Check if you are using a supported browser:
Is your browser supported?
Go to step 5. Contact your administrator.
Check that the network connection is active.
Is the network connection active?
Go to step 6. Fix the cable connection.
Make sure that the cable connections to the printer and print server are securely attached. Please refer to the documentation provided with the printer for more information.
- Are the cables secure?

Go to step 7. Contact your administrator.
Check that the web proxy servers are disabled.
Have the web proxy servers been disabled?
The problem is solved.
Contact Customer support.
Get access to the Embedded Web Server.
Is the Embedded Web Server being opened?
Go to step 2. Wait until the printer has finished processing the other task.
Check that the printer is not processing another printing, copying, scanning or fax job.
Is the printer ready?
Step 2 Check that the flash drive is in front USB port.
Go to step 3. Place the flash drive in the right port.
Has the flash drive been placed in the right port?
Step 3. Check that the flash drive is supported. See 'Supported flash drives and file types' on page 46 for more information.
Go to step 4. Place a under-supported flash drive.
Is the flash drive supported?
The problem is solved.
Contact Customer support.
a Check that the USB port is enabled. See 'USB port'
activate' on page 149 for more information. b Remove the flash drive and then place it again.
Does the printer recognize the flash drive?
Browse the control panel to:
Institutions > Network/Ports > USB > Activate USB port
For printer models without touchscreen, press to navigate through the settings.

1 Print page with network settings.
Browse the control panel to:
Institutions > Reports > Network > Page Network Settings
For printer models without touchscreen, press to navigate through the settings.
2 Check the first part of the page to see if Status indicates that the printer is connected.
If Status indicates that the printer is not connected, it may be that the LAN connection point is not active or that the network cable is not plugged in or not working properly. Contact your administrator for support.
The problem is solved.
Go to step 2.
Turn off the printer and then turn on the printer after about 10 seconds.
Is the internal option working well?
Step 2 Print a page with menu settings and check if the internal option is listed in the list of installed functions.
Go to step 4. Go to step 3.
Is the internal option displayed on the menu setting page?
The problem is solved.
Go to step 4.
Check that the internal option is properly installed on the controller card.
a Turn off the printer and pull the plug on the power cord of the
printer out of the socket. b Make sure the internal option on the right connector is
controller card installed. c Connect the power cord plug to the socket and put the
printer on.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
Is the internal option working well?

The problem is solved.
Contact Customer support.
a Check that the internal option is available in the print steering
program.
Is the internal option working well?
Try one or more of the solutions:
Try one or more of the solutions:
Try one or more of the solutions:
Solving problems 151 · Action Yes No · Step 4.

You can solve this problem by buying a cartridge with the region that matches the printer region, or buy a universal cartridge.
Universal or undefined region 0
North America (United States, Canada) 1
European Economic Area, Western Europe, Scandinavian countries, Switzerland 2
Asia and the Pacific 3
Other European countries, Middle East, Africa 5
The printer has detected that a supply or part of a brand other than Lexmark is installed in the printer.
Your Lexmark printer works best with original Lex Mark supplies and parts. When you use supplies or parts of other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device.
All life indicators are designed to function with the supplies and parts Lexmark. If you use supplies or parts from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended lifetime can damage your Lexmark printer or its parts.
If you want to accept these risks and continue using non-original supplies or
parts in your printer, then keep them depending on your printer model, X and # or X and pressed on the control panel 15 seconds at a time.

If you do not want to accept these risks, remove the supply or component of other manufacturers from your printer and replace it with an original supply or part of Lexmark. See 'Use Official Lexmark parts and supplies' on page 103 for more information.
If you: X and #or X and has pressed 15 seconds at the same time and still cannot print the printer, you need to reset the user of supplies.
1 Browse the control panel to:
Institutions > Device > Maintenance > Configuration Menu > Consumption and counters of supplies
For printer models without touchscreen, press to navigate through the settings.
2 Select the component or supply you want to set up and then select Start.
3 Read warning message and then select Continue.
4 Hold X and #or X and press 15 seconds simultaneously to delete the message.
Go to step 2. The problem is solved.
a Use an envelope that is stored in a dry environment.
Is the envelope taped up while printing?
Contact Customer support.
The problem is solved.
a Make sure the paper type is set to Envelope.
Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Species
For printer models without touchscreen, press to navigate through the settings. b Send the print job.
Is the envelope taped up while printing?

The problem is solved.
Go to step 2.
a Browse the printer's control panel to:
Institutions > Print > Classification > Sort
For printer models without touchscreen, press to navigate through the settings. b Set Sort to.
c Print the document.
Are the pages sorted correctly?
The problem is solved.
Go to step 3.
a Open the dialog from the document you want to print
Print and select Sort. b Print the document.
Are the pages sorted correctly?
The problem is solved.
Contact Customer support.
a Reduce the number of pages to print. b Print the document.
Are the pages sorted correctly?
The problem is solved.
Go to step 2.
a Check that the loading paper of the same size and the same
contain species. b Check that the paper guides are correctly placed.
c Print the document.
Are the drawers properly coupled?
The problem is solved.
Go to step 3.
a Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Species
For printer models without touchscreen, press to navigate through the settings. b Set the paper size and type of paper in the
Linked drawers. c Print the document.
Are the drawers properly coupled?

The problem is solved.
Contact Customer support.
a Make sure the drawer link is set to Automatic.
See 'Link Loading' on page 35 for more information. b Print the document.
Are the drawers properly coupled?
Go to step 2. The problem is solved.
a Remove the drawer. b Check that the paper is correctly placed.
Do paper failures keep on happening regularly?
Go to step 3. The problem is solved.
a Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Species
For printer models without touchscreen, press to navigate through the settings. b Set the correct paper size and type of paper.
c Print the document.
Do paper failures keep on happening regularly?
Contact Customer support.
The problem is solved.
a Replace the paper. Use paper from a new suit.
Do paper failures keep on happening regularly?

a Browse the control panel to:
The problem is solved.
Contact Customer support.
Institutions > Device > Notifications > Restore contents after malfunction
For printer models without touchscreen, press to navigate through the settings. b Select To or Automatic, and then the changes
Please. c Print the document.
- Are the pages that have been blocked printed?
Empty or white pages

print quality. For printer models without touch screen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing empty or white pages?

Go to step 3. The problem is solved.
a Remove any remaining packaging from the
Image processing unit.
1 Remove the toner cartridge and then remove the image unit.
Is the printer printing empty or white pages?
Go to step 5. Go to step 4.
Check the transfer roller to see if it is correctly installed.
Is the transfer roller installed correctly?
Go to step 5. The problem is solved.
a Remove the transfer roller and then place it again. b Print the document.
Is the printer printing empty or white pages?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the printer printing empty or white pages?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print dark?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Lower the set value for toner intensity. Browse on the
Control panel to:
Institutions > Print > Quality c Print the document.
Is the print dark?
Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the print dark?

Go to step 5. Go to step 6.
Check whether the paper has structure or rough finish.
Do you print on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Replace paper with structure by normal paper. b Print the document.
Is the print dark?
Go to step 7. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the print dark?
Go to step 8. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the print dark?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print dark?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are accurate details not printed correctly?
Contact Customer support.
The problem is solved.
a Adjust the print quality settings.
1 Browse the control panel to:
Institutions > Print > Quality > Pixel reinforcement > Fonts 2 Set toner intensity to 7. Browse the control panel to:
Institutions > Print > Quality b Print the document.
Are accurate details not printed correctly?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper folded or wrinkled?
Go to step 3. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper folded or wrinkled?
Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the paper folded or wrinkled?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Turn off the printer, wait 10 seconds and switch on the printer
Back in. b Reduce toner intensity.
Browse the control panel to: Institutions > Print > Quality c Print the document.
Do printing contain a grey background?
Go to step 3. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain a grey background?
Go to step 4. The problem is solved.
a Specify the paper format via the Preference Settings dialog
print or print the window depending on the operating system.
Do printing contain a grey background?

Go to step 5. The problem is solved.
a Remove the image processing unit.
Image processing unit.

Do printing contain a grey background?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain a grey background?


The problem is solved.
Go to step 2.
a Move the guides into the right position for the relevant
paper format. b Print the document.
Are the margins correct?
The problem is solved.
Contact Customer support.
a Specify the paper format via the Preference Settings dialog
print or print dialog depending on the operating system.
Are the margins correct?

print quality. For printer models without touch screen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print light?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Adjust toner intensity. Browse the control panel to:
Institutions > Print > Quality c Print the document.
Is the print light?
Go to step 4. The problem is solved.
a Specify the paper format via the Preference Settings dialog
print or print the window depending on the operating system.
Is the print light?
Go to step 5. The problem is solved.
Check that the print resolution is set to 600 dpi.
a Browse the control panel to:
Institutions > Print > Quality > Print resolution b Print the document.
Is the print light?

Go to step 6. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
Image processing unit. c Shake the image processing unit so that toner becomes equal
divided and put it back. d Place the toner cartridge. e Turn off the printer, wait 10 seconds and switch on the printer
Back in. f Print the document.
Is the print light?
Go to step 7. The problem is solved.
a If the problem arises after installing a new one
Maintenance kit, then check that the transfer roller included in the kit is installed.
Is the print light?
Step 7. This allows you to check the status of the image processing unit. Browse the control panel to:
Go to step 8. Contact Customer support.
Is the image processing unit almost worn out?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print light?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Go to step 3. Contact Customer support.
Check the printer for leakage of toners.
Isn't there a leak of toners in the printer?
Step 3. This allows you to check the status of the image processing unit. Browse the control panel to:
Go to step 4. Contact Customer support.
Is the image processing unit almost worn out?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper curled over?
Go to step 3. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the paper curled over?
Go to step 4. The problem is solved.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
Is the paper curled over?
Go to step 5. The problem is solved.
a Remove the paper from the drawer and turn it around. b Print the document.
Is the paper curled over?

Go to step 6. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper curled over?
Contact Customer support.
The problem is solved.
a Check that the paper entered is supported.
Is the paper curled over?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the print oblique or crooked?
Go to step 3. The problem is solved.
a Check that the paper entered is supported.
Is the print oblique or crooked?

Contact Customer support.
The problem is solved.
a Check the dial in the input tray for damage and replace
This one if necessary. b Print the document.
Is the print oblique or crooked?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing plain black pages?
Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the printer printing plain black pages?

Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Is the printer printing plain black pages?
Step 4. Check the image processing unit for damage.
Contact Customer support.
Go to step 5.
Isn't the image processing unit damaged?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the printer printing plain black pages?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are text or images cut off?
Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Are text or images cut off?

Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are text or images cut off?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Are text or images cut off?


print quality. For printer models without touch screen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Easy to let go of the toner?
Go to step 3. The problem is solved.
a Specify the paper format via the Preference Settings dialog
print or print the window depending on the operating system.
Easy to let go of the toner?
Contact Customer support.
The problem is solved.
a Remove the heating station and then place it again. b Print the document.
Easy to let go of the toner?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain horizontal light stripes?
Contact Customer support.
The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Print the document.
Do printing contain horizontal light stripes?

print quality. For printer models without touchscreen, press to navigate through the settings.

a Check if the printer has an original and supported Lexmark-
Contact Customer support.
The problem is solved.
toner cartridge used.
Are printing still containing vertical light stripes?

print quality. For printer models without touch screen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain vertical white lines?
Go to step 3. The problem is solved.
Solve problems with slow prints. See 'Print is slow' on page 184 for more information.
Do printing contain vertical white lines?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain vertical white lines?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are prints still containing vertical dark stripes?
Go to step 3. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
c Print the document.
Are prints still containing vertical dark stripes?

Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are prints still containing vertical dark stripes?
Contact Customer support.
The problem is solved.
a Check if bright light enters the right side of the printer
and move the printer if necessary. b Print the document.
Are prints still containing vertical dark stripes?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do vertical dark lines or stripes appear in prints?
Go to step 3. The problem is solved.
a Remove the image processing unit and install it
then again.
Do vertical dark lines or stripes appear in prints?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do vertical dark lines or stripes appear in prints?


print quality. For printer models without touchscreen, press to navigate through the settings.
Troubleshooting 180

Go to step 2. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Do printing still contain vertical dark lines and missing images?
Contact Customer support.
The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing still contain vertical dark lines and missing images?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. Note the distance and contact Customer support.
Using the print quality test pages, you can check whether the distance between recurring failures is equal to one of the following:
Does the distance between recurring failures correspond to any of the dimensions?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain repeated malfunctions?
The problem is solved.
Go to step 2.
a Check the control panel or documents in the list
display with waiting tasks.
Are the documents printed?

The problem is solved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?
Step 3. If you print from the internet, it may be that the printer reads multiple job names as duplicates.
The problem is solved.
Go to step 4.
a Open the Print Preferences dialog. b Select Keep duplicate documents in the Print-
and waiting duties. c Enter a PIN. d Send the print job again.
a Save each task separately and give it a unique name. b Send the task separately.
Are the documents printed?
The problem is solved.
Go to step 5.
a Remove some tasks in queue to free printer memory
The Commission has already taken a decision on this matter. b Send the print job again.
Are the documents printed?
The problem is solved.
Contact Customer support.
a Add printer memory. b Send the print job again.
Are the documents printed?

Step 1 Check that the printer cable is securely connected to the printer and to the computer, print server, option or other network device.
Go to step 2. The problem is solved.
Is the printer slow with prints?
Go to step 3. The problem is solved.
a Make sure the printer is not in Ecomode or Silent Mode
The first step is to reduce the risk of infection.
Institutions > Device > Energy management > Ecomode • Browse the control panel to:
Institutions > Device > Maintenance > Configuration Menu > Operation of apparatus > Silent Mode
For printer models without touch screen, press to navigate through the settings. b Print the document.
Is the printer slow with prints?
Go to step 4. The problem is solved.
a Enter the print resolution in Preferences settings for
print or in the Print dialog, depending on your operating system. b Set the resolution to 600 dpi.
c Print the document.
Is the printer slow with prints?
Go to step 5. The problem is solved.
a Browse the control panel to:
Institutions > Print > Quality > Print Resolution
For printer models without touch screen, press to navigate through the settings. b Set the resolution to 600 dpi.
c Print the document.
Is the printer slow with prints?

Go to step 6. The problem is solved.
a Specify the paper format via the Preference Settings dialog
print or print the window depending on the operating system.
Is the printer slow with prints?
Go to step 7. The problem is solved.
a Check that the printer settings for the structure and
weight of the printing material match the paper you want to place.
Is the printer slow with prints?
Step 7. Wait jobs removed.
Go to step 8. The problem is solved.
Is the printer slow with prints?
Go to step 9. The problem is solved.
a Check that the printer does not overheat.
Is the printer slow with prints?
Contact Customer support.
The problem is solved.
a Add more printer memory. b Print the document.
Is the printer slow with prints?

The problem is solved.
Go to step 2.
a Open the dialog from the document you want to print
Print and check that you have selected the correct printer. b Print the document.
Is the document printed?
The problem is solved.
Go to step 3.
a Check that the printer is enabled. b Fix the error messages that appear on the display.
c Print the document.
Is the document printed?
The problem is solved.
Go to step 4.
a Check that the gates are working and that the cables are securely mounted.
Locks on the computer and printer.
For more information, please refer to the printer installation documentation provided. b Print the document.
Is the document printed?
The problem is solved.
Go to step 5.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Print the document.
Is the document printed?
The problem is solved.
Contact Customer support.
a Remove the printer driver and reinstall it. b Print the document.
Is the document printed?

Step 1 Check that the power cord is connected to the socket.
The problem is solved.
Go to step 2.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Step 2 Check that the power outlet is switched off using a switch or circuit breaker.
Turn on the switch or reset the circuit breaker.
Go to step 3.
Is the power outlet switched off using a switch or circuit breaker?
Go to step 4. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Press the On/Off button to turn on the printer.
Go to step 5.
Check that the printer is in sleep or slumber mode.
Is the printer in sleep or slumber mode?
Step 5. Check that the cables with which the printer is connected are in correct ports.
Go to step 6. Place the cables in the correct ports.
Are the cables in the correct ports?
Step 6. Turn off the printer, install hardware options and turn on the printer.
The problem is solved.
Go to step 7.
Please refer to the documentation provided by the printer for more information.
Step 7. Install the correct printer driver.
The problem is solved.
Go to step 8.
Step 8 Turn off the printer and then turn on the printer after about 10 seconds.
The problem is solved.
Contact Customer support.

1 Browse the control panel to:
Institutions > Print > Quality > Toner intensity
For printer models without touchscreen, press to navigate through the settings.
2 Adjust the setting.
3 Apply the changes.
Go to step 2. Place the right paper size and type of paper.
a Check that you print on the right paper. b Print the document.
Is the document printed on the right paper?
The problem is solved.
Go to step 3.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
For printer models without touchscreen, press to navigate through the settings. b Make sure the settings match the paper that is
Placed. c Print the document.
Is the document printed on the right paper?
The problem is solved.
Contact Customer support.
a Check that the drawers are connected.
See 'Link Loading' on page 35 for more information. b Print the document.
Is the document printed from the correct drawer?
Before contacting customer support, make sure you have the following information:

Go http://support.lexmark.com for support by email or via chat, or browse through the library of manuals, supporting documentation, drivers and other downloads.
Technical support via the phone is also available. In the US or Canada, call 1-800-539-6275. Go to other countries or regions http://support.lexmark.com.
Solution 189

Upgrade and migrate 190
Hardware
Access the controller card.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.

Upgrade and migrate 191

4 Install all supported internal options. Please refer to the documentation provided by the printer for more information.
5 Close the access valve.
6 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
7 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.

Upgrade and migrate 192
4 Remove the memory card from the package.
5 Place the memory card until it clicks.

6 Close the access valve.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.

Upgrade and migrate 193
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.
4 Remove the optional card from the package.
5 Press the card firmly in place.


Upgrade and Migrate 194
6 Close the access valve.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.
4 Remove the hard drive from the printer.

Upgrade and migrate 195
5 Attach the hard drive and then connect the interface cable of the hard disk to the controller card.

6 Close the access valve.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer and pull the plug on the power cord of the printer from the socket.
2 Open the controller card access valve using a flat-head screwdriver.

Upgrade and migrate 196
3 Unpack the internal solutions port (ISP) kit.

4 If necessary, remove the hard drive from the printer.
2 Mounting bracket · 3 Screws

Upgrade and Migrate 197
5 Press the bracket on the card until it clicks.

6 Attach ISP to the bracket.


Upgrade and migrate 198
7 Fix hard disk on the ISP (if necessary). a Remove the bracket from hard drive.

b Connecting hard disk to ISP.


Upgrade and migrate 199
8 Close the access valve.
9 Connect the power cord plug to the socket and turn on the printer.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the optional tray and remove all packaging material.
4 Adjust the printer with the optional tray and lower the printer until it clicks.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.

5 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
6 Turn on the printer.

Upgrade and migrate 200
Add the drawer to the printer driver to make it available for printing tasks. See 'Add the printer driver options available' on page 216 for more information.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the drawer and remove all packaging material.
4 Install the drawer on the base with swivel wheels.
PLEASE NOTE: RISK OF INJURY: If the drawer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.

5 Line the printer with the drawer and lower the printer until it clicks.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.

Upgrade and migrate 201

6 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
7 Turn on the printer.
Add the drawer to the printer driver to make it available for printing tasks. See 'Add the printer driver options available' on page 216 for more information.

Upgrade and migrate 202
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the mailbox.
4 Attach the conductor beam to the mailbox.
a Put the mailbox on his side.


Upgrade and migrate 203
b Place the tabs of the conductor box in the mailbox.

c Move the conductor beam to the right until it clicks.


Upgrade and Migrate 204
5 Remove the top valve from the printer.

6 Install the mailbox on the printer.


Upgrade and migrate 205
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
8 Turn on the printer.
Add the mailbox to the printer driver to make it available for print jobs. See 'Add the printer driver options available' on page 216 for more information.
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the high-capacity output drawer or output drawers.
4 Attach the conductor beam to the optional output charger or high-capacity output chargers.
a Put the optional output charger on its side.


Upgrade and Migrate 206
b Place the tabs of the conductor beam in the optional output charger.


Upgrade and migrate 207
c Move the conductor beam to the right until it clicks.

5 Remove the top valve from the printer.

Upgrade and migrate 208
6 Install the optional output charger on the printer.

In a setup with two or more hardware options:
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
8 Turn on the printer.
Add the optional output loader to the printer driver to make it available for printing tasks. See 'Add the printer driver options available' on page 216 for more information.

Upgrade and migrate 209
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Remove the staple finisher from the pack.
4 Attach the conductor beam to the non-finisher.
a Put the nonfinisher on his side.


Upgrade and migrate 210
b Place the tabs of the conductor beam in the non-finisher.

c Move the conductor beam to the right until it clicks.


Upgrade and migrate 211
5 Remove the top valve from the printer.
6 Install the nonfinisher on the printer.

In the case of configuration with two or more options, the nonfinisher must always be placed on top.

Upgrade and migrate 212
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
8 Turn on the printer.
Add the nonfinisher to the printer driver to make it available for printing tasks. See 'Add the printer driver options available' on page 216 for more information.
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the finisher for staples and perforations.
4 Attach the conductor beam to the finisher with non- and perforating function.
a Put the finisher on his side with non- and perforating function.


Upgrade and migrate 213
b Place the guide-rally tabs in the finisher with non- and perforating function.

c Move the conductor beam to the right until it clicks.


Upgrade and migrate 214
5 Remove the top valve from the printer.
6 Install the finisher on the printer.

The finisher cannot be combined with other options.

Upgrade and migrate 215
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
8 Turn on the printer.
Add the finisher to the printer driver to make it available for printing tasks. See 'Add the printer driver options available' on page 216 for more information.
You can use the software CD to install the printer software for the following operating systems:

Upgrade and Migrate 216
2 Run the installer and follow the instructions on the computer display.
3 For Macintosh users: add the printer.
For Windows users
1 Open the printer folder.
3 Navigate to the Configuration tab and then select Update now - Printer questions.
4 Apply the changes.
1 Navigate via System Preferences in the Apple menu to your printer and then select Options and supplies.
2 Navigate to the list of hardware options and then add any installed options.
3 Apply the changes.
You can export the configuration settings of your printer to a text file and then import this file to apply the settings on other printers.
1 Open a web browser and type the printer IP address in the address bar.
2 Export or import a configuration file for one or more applications.

Upgrade and migrate 217
a Click on the Embedded Web Server Apps > the application you want > Configure. b Click on Export or Import.
a Click on Embedded Web Server Export Configuration or Import Configuration. b Follow the on-screen instructions.
Some applications require a minimum level of device firmware to make the device work properly.
Contact your Lexmark supplier for more information about updating the device firmware.
1 Click on the Embedded Web Server Institutions > Device > Update firmware.
2 Browse for the desired flash file.
3 Apply the changes.

Product information
Product name:
Lexmark B2865dw-, Lexmarket M5255-,Lexmark M5270-,lexmark MS725dvn-; Lex Mark MS821n-, lexmarkMS821dn--;Lexmarket MS822de-; lexmarketMS823n-., Lxmark MS823dn -; Lxmarket MS825dn, LExmark MS826de-printers
Device type:
Models:
210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830
The following paragraph shall not apply to countries where the conditions are contrary to national law: LEXMARK INTERNATIONAL, INC., THIS PUBLICATION AS SUCH PROVIDES WITHOUT ANY FORM OF GUARANTEE, NEITHER IMPLIED NOR EXPLICIT, INCLUDING BUT NOT LIMITED TO THE IMPLICIT GUARANTEES OF MERCHANTABILITY OR SUITABILITY FOR A PARTICULAR PURPOSE. In some jurisdictions, rejection of explicit or implied guarantees is not permitted in certain transactions, so this statement may not apply to you.
This publication may contain technical inaccuracies or typographical errors. The information contained in this publication is regularly reviewed, changes will be included in subsequent expenditure. The products or programmes described may be improved or modified at any time.
References in this publication to products, programmes or services do not imply that the manufacturer intends to place these products on the market in all countries where the manufacturer is active. A reference to a product, program or service does not mean that only that product, programme or service can be used. Instead, all functionally equivalent products, programmes or services, which do not infringe existing intellectual property rights, may be used. The user shall be responsible for the evaluation and control of operation in conjunction with other products, programmes or services, except those products, programs or services specified by the manufacturer.
For technical support of Lexmark, go to http://support.lexmark.com.
For information about Lexmark's privacy policy regarding the use of this product, please visit www.lexmark.com/privacy.
Go www.lexmark.com for information on supplies and downloads.
© 2018 Lexmark International, Inc.
All rights reserved.
Notifications 218 · August 2019

Lexmark and the Lex mark logo are trademarks of Lex Mark International, Inc., filed in the United States and/or other countries.
Google Cloud Print and Googel Chrome are trademarks of Goobook Inc. Android and Google Play are trademarks of Goobook LLC.
Macintosh, Mac App Store and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of the Microsoft business group in the United States and other countries.
Mopria®, the Mopria® logo and the Mopri® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is an indication of Hewlett- Packard Company for a collection of printer assignments (printer language) and functions in its products. This printer is designed to support the PCL language. The printer recognizes PCL commands used in various applications and emulates the functions corresponding to these commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and other countries.
Other trademarks are the property of their respective owners.
You can read all license notifications associated with this product from the CD:\KNOWINGS directory of the installation software CD.
The following measurements are made in accordance with ISO 7779 and reported according to ISO 9296.
Noise pressure on average 1 m, dBA
Printing 56 (MS725dvn); 57 (B2865dw, M5255, MS821n, MS821dn,MS822de, MS 823n, MS823dn); 58
Completed 28 (MS725dvn); 14 (B2865dw, M5255, M5270, MS821n, MS821, MS822de, MS823n,MS823dn, Ms825dn and MS826d)
Values can be changed. Go www.lexmark.com for current values.
Notifications 219 · (M5270, MS825dn, MS826de)

The WEEE logo indicates that there are specific recycling programmes and procedures for electronic products in the countries of the European Union. We ask you to recycle our products.
If you have further questions about recycling options, please visit Lexmark's website at www.lexmark.com for the phone number of your local supplier.
Do not throw away the printer or components with household waste. Contact your municipality for disposal and recycling options.
This symbol indicates components sensitive to static electricity discharge. Touch parts in the areas listed below only after touching a metal surface outside of the area with the symbol.
To prevent damage by electrostatic discharge when performing maintenance tasks such as solving paper failures or replacing supplies, touch a exposed metal frame of the printer before doing anything with the inside of the Printer even if there is no symbol.
All Lexmark products with the ENERGY STAR® logo on the product or on a home screen are certified in accordance with EPA's ENERGY STAR requirements, if the configuration set by Lex Mark still applies.
Notifications 220

Operating temperature and relative humidity 15.3 to 32.2 °C and 8 to 80% relative humidity 1.1 to 35 °C (34 to 95 °F) and 8 - 80% relative air humidity Maximum wet bulb temperature2: 22.8 °C Non-condensing environment
Printer/cardboard / long-term storage image acquisition unit1
Printer/cartridge / short-term transmission image processing unit
-40 tot 43,3 °C
1 Lifetime of supplies is about two years. This is based on storage in a standard office environment with 22°C and 45% humidity.
2 Wet bulb temperature is determined by the air temperature and relative humidity.
The printer is certified in the United States as a product that meets the requirements of DHHS 21 CFR Chapter 1, Subpart J for Class I (1) laser products. Elsewhere, the printer is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Class I laser products shall be considered as not presenting any danger. The laser system and printer are designed to ensure that users never experience laser radiation higher than the permitted level for Class I devices, during normal use, maintenance work by the user or prescribed service activities. The printer has a non-usable print head unit. It shall contain a laser with the following specifications:
The following table describes the printer's energy consumption characteristics.
Mode Description Power consumption (Watt)
Printing
Paper copies of electronic imports shall be made with the product.
800 (MS725dvn); 670 (M5255, MS821n, MS821dn); 700 (MS822de); 770 (B2865dw, MS823n, MS823dn); 830 (M5270, MS825dn, MS826de)
Copying Paper copies of paper originals are made with the product.
Scan Paper originals are scanned with the product.
NA
Notifications 221

Mode Description Power consumption (Watt)
Ready The product is waiting for a printing job. High power consumption: 95 (MS725dvn); 39 (M5255, MS821n, MS821dn,MS822de); 34 (B2865dw, MS813n, MR823dn); 38.5 (M5270, MS825dn and MS8226d) Low power consumptions: 75 (MS725dvN), 21.5 (MS821N, MS832dn), 20 (B286dw., MS 823n and M823Dn); 21 (M51270,MS825Dn, M8226de)
Sleep mode The normal device's saving mode is activated.
1.3 (MS725dvn); 1.4 (M5255, M5270, MS821n, MS821dn,MS822de, MS850dn and MS826de); 1.6 (B2865dw, MS83n, MS823dn)
Sleeping mode The optimal energy savings of the device is activated.
The product is connected to an outlet, but the device is switched off.
The energy consumption levels shown in the previous table indicate measurements of average times. Immediate energy reductions can be substantially higher than the average.
Values can be changed. Go www.lexmark.com for current values.
This product has an energy-saving mode called sleep mode. In sleep mode, energy is saved by reducing power consumption during longer periods of time when the device is not active. The sleep mode is automatically switched on when the product is not used for a pre-set period (timeout for sleep mode).
Standard setting for the time-out of this product (in minutes): 15
You can set the time-out for sleep mode from configuration menus between 1 minute and 120 minutes. If you set the sleep timeout to a low value, energy consumption will decrease but product response times may increase. When you set the time-out for sleep mode to a high value, the printer reacts quickly but more energy is consumed.
This product has a mode in which it consumes very little energy called slumber mode. If the printer's slumber mode is active, other systems and devices will be switched off safely.
You can use the following methods to enable slumber mode:
The standard slumber mode time-out for this product in all countries or regions 3 days
You can set the time period that the printer waits for before the slumber mode is enabled after a task has been printed between one hour and one month.
Notifications 222 · 0.2 · 0.2

If this product has a state in which it is switched off but still consumes a small amount of energy and you want to stop the power consumption completely, pull the plug on the product from the socket.
It is sometimes useful to estimate the total energy consumption of the product. As the energy consumption is calculated in Watt, the energy use should be multiplied by the time used by the product in each mode to calculate total energy consumption. The total energy consumption of the product is the sum of each mode's energy consumption.
This section contains information on regulation that applies only to wireless models.
If you have doubts as to whether your model is a wireless model, please go http://support.lexmark.com.
Wireless models may contain the following modular component(s):
The amount of high frequency energy emitted by this wireless device is well below the limits for high frequency power set by the FCC and other regulatory authorities. There shall be a minimum of 20 cm (8 inch) space between the antenna and any person to meet the requirements for high frequency energy from the FCC and other regulatory authorities.
This product complies with the safety requirements of Council Directive 2014/53/EU on the approximation of Member States' laws relating to radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
The CE sign indicates that a device complies with the safety requirements:
Notifications 223

These radio equipment may only be used indoors. Use outdoors is permitted. This restriction applies to all countries listed in the following table:

Austria Belgium Bulgaria Switzerland Cyprus Czech Republic Germany Denmark Estonia
Greece Spain Finland France Croatia Hungary Ireland Iceland Italy
Liechtenstein Lithuania Luxembourg Latvia Malta Netherlands Norway Poland Portugal
Romania Sweden Slovenia Slovakia Turkey United Kingdom
radio frequency capability
This radio product emits in the 2.4 GHz band (2.412 - 2,472 GHz in the EU) or 5 GHz band (5.15-5.35, 5.47-5,725 GHz in EU). The maximum EIRP transmitter power, including antenna reinforcement, is ≤ 20 dBm for both frequency bands.
This product complies with the safety requirements of Council Directives 2014/30/EU, 2014/35/EU and 2011/65/EU on harmonisation of Member States' laws relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits, energy efficiency of products consuming energy and restriction of the use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product meets the requirements of EN55022 and EN55032 with regard to Class A products and safety requirements of either EN 60950-1 or EN 62368-1.
This product meets the emission requirements of EN55022 and EN55032 with respect to Class A products limits and EN55024 immunity requirements. This product is not intended for use in residential environments.
Notifications 224

This is a class A product. In a home environment, this product may cause radio interference, in which case the user may need to take appropriate measures.
Notifications 225





Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.