
User manual
Type(s) of equipment:
Model(s):
530, 571




Conventions
Various precautions:
Precautionary Statements 5

CAUTION – POSSIBLE RISK OF INJURY The power cord shall not be cut, distorted, pinched or squeezed. In addition, no heavy objects may be placed on it. Do not expose the cable to wear or other stress. Do not clamp the power cord between objects such as B. furniture or walls. If one of these hazards is present, there is a danger of fire and electric shock. Check the power cord regularly for these dangers. Unplug the power plug from the socket before checking the power cord.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If there are other devices connected to the printer, turn them off as well and unplug all cables on the printers.
Precautionary Statements 6

This device and its associated components have been designed and tested for use in compliance with global safety requirements. The safety-relevant functions of the components and options are not always obvious. If parts are used that do not originate from the manufacturer, he assumes no responsibility or liability for this product.
Have all maintenance and repair work not described in the user documentation done exclusively by a customer service representative.
This product uses a printing process in which the print media are heated. This warming can lead to emissions from the printing media. It is therefore important that you read carefully in the user manual the section dealing with selecting suitable print media and follow the guidelines listed therein to prevent harmful emissions.
This product may produce small amounts of ozone in normal operation and can be equipped with a filter that reduces the concentration of ozoan to well below recommended exposure limits. To avoid high ozone concentrations during intensive use, you should place this product in a well-ventilated environment and replace the ozonate and exhaust filters according to product maintenance instructions. If the product maintenance instructions do not contain any information about filters, this product does not have filters that need to be replaced.
KEEP THESE INSTRUCTIONS.
Precautionary Statement 7

Information about the printer 8
Determining Printer Information

Information about the printer 9

When selecting a printer location, make sure there is enough space to open paper trays, covers and flaps as well as install hardware options.

Information about the printer 10
– away from the direct air draft of air conditioners, heaters or fans. – away from direct sunlight and extreme humidity. • Keep the recommended temperatures and avoid any fluctuations in temperature:
Ambient temperature 10 to 32.2° C.
Storage temperature -40 to 43.3° C.

You can configure your printer with three additional optional 550 or a 2200 sheet tray.

Information about the printer 11


Information about the printer 12




Information about the printer 13
2 Home button Return to the home screen.
3 Keyboard Enter numbers or symbols into an input field.
4 Power switches • Switching the printer on or off.
Cancel the current order.
6 Check the printer status.
7 Volume buttons Adjust the volume for the headset or speaker.
Connection of a headset or speaker.
9 Re-key Move the cursor back and delete a character in an input field.
The printer is switched off or in sleep mode.
Blue The printer is ready or processing data.
Red The printer is waiting for an action from the user.
Colour of the printer status key
The printer is out, ready or processes data.
Constant yellow The printer is in energy-saving mode.
Yellow flashing The printer is in sleep mode.
After the printer is switched on, the start screen will be displayed on the display. Use the buttons and icons on the Home screen to start an action.

Information about the printer 14


2 Order queue View all current print jobs.
3 Change language Changing the language on the printer display panel.
4 Settings Access to the printer menus.
5 View, select or print photos and documents from a flash drive.
6 Stop jobs View all current, held print jobs.

Lock Device Prevents users from gaining access to printer functions on the home screen.
Symbol purpose

Information about the printer 15
Security
Printing of flash drive

Information about the printer 16
Touch the option on the home screen Settlements > Reports > Menu settings page.

Setting up and using the Start Screen Applications 17
Adjusting the Start Screen
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Equipment > Visible start screen icons.
3 Select the icons that you want to display on the Home screen.
4 Apply the changes.
1 Touch on the home screen Change background image.
2 Select an image to use.
3 Apply the changes.
Make sure in advance that the slideshow settings are configured correctly. Further information can be found in the documentation for your printer.
1 Connect a flash drive to the USB port.
2 Touch on the home screen Slideshow.
1 Open a web browser and enter the printer’s IP address in the address field.

Setting up and using the start screen applications 18
2 Click on it Apps > Forms and Favorites > Configuration.
3 Click on it Adding, and adjust the settings.
4 Apply the changes.
1 Touch on the home screen Savings settings.
2 Configure the Eco-Mode settings or set an energy saving mode.
3 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
3 Select from the "Contacts" section, Add contacts.
4 If applicable, provide a method for logging in and allow the application to access it.
5 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.

Setting up and using the Start Screen Applications 19
2 Click on it Address book.
3 Select the contact group in the section and add a group name.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.

Setting up and using the accessibility functions 20
Activation of the magnification mode
1 Hold the button on the control panel 5 Press until a voice message is heard.
2 Select Increase in size.
3 Select OK.
For more information about navigation on an enlarged screen, see "Navigating the screen with gestures" on page 21.
1 Hold the button 5 Press until a voice message is heard.
2 Select OK.
1 Hold the button 5 Press until a voice message is heard.
2 Press Tabto navigate the image focus cursor to the OK button, and then press Enter.
1 On the Home screen, press on the option Settlements > Equipment > Access > Speaking speed.
2 Select the speaking speed.
1 On the Home screen, press on the option Settlements > Equipment > Access > Passwords/PINs.
2 Activate the setting.

Setting up and using the accessibility functions 21
Double-Tap an option or select an item on the screen.
Triple type enlarge or shrink text and images.
Swipe right or down to the next element on screen.
Swipe left or up to switch to the previous item on screen.
Pan access to parts of the zoomed image that the screen otherwise does not display.
Swipe up and then left to quit an application and return back to home screen.
Swipe down and then left
Move up and then down
Repeat a spoken command.
Perform one or more of the following methods:
Gesture function

Insertion of paper and special printing media 22
Determine the format and same type of specialty print media
The compartments automatically recognize the format of normal paper. For specialty printing media such as labels, cards or envelopes, proceed as follows:
1 Switch to the home screen:
Settlements > Paper > Subject configuration > Paper size/grade > Select a paper feeder
2 Set the format and type of specialty print media.
1 Touch the option on the home screen Settlements > Paper > Media configuration > Universal.
2 Configure the settings.
1 Pull the tray out.


2 Adjust the guides so that they match the format of the inserted paper.

Insertion of paper and special printing media 23

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.

4 Place the paper with its print page up.

Insertion of paper and special printing media 24

5 Push the tray into the printer.
If you are inserting a paper size other than regular paper, set the paper size and format to match the paper inserted into the tray.
1 Open the universal feeder.


2 Adjust the guide so that it matches the format of the inserted paper.


Insertion of paper and special printing media 25
3 Before inserting, bend the paper in both directions, fan it up and level out the edges.

4 Put the paper in. • Place paper, cards and slides with the printable side downwards and top edge ahead.


5 On the Paper Format and Type panel, set according to the paper inserted in the tray.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Paper.

Insertion of paper and special printing media 26
3 Adjust the paper format and grade settings for the trays you connect.
4 Save the settings.

1 In the document you want to print, open the Print dialog box.
2 Adjust the settings as needed.
3 Print the document.
1 Switch to the home screen:
Forms and Favorites > Select format > Printing
2 If necessary, adjust the pressure settings.
3 Send the print job.
With Mobile Print, you can send documents and images directly to a supported Lexmark device.
1 First open the document, and then send it to Lexmark Mobile Print or share it with Lex mark Mobile Print.
2 Select a printer.
3 Print the document.
Printing 27

Google Cloud PrintTM is a mobile printing service that allows applications to print on mobile devices on any Google Cloud print-enabled printer.
1 Start a suitable application from the home screen of your mobile device.
2 Tap them PrintingAnd select the printer.
3 Send the print job.
The Mopria® printing service is a mobile print solution for mobile devices running Android version 4.4 or higher. This allows you to print directly on any Mopria certified printer.
1 Launch a compatible application from the home screen of your mobile device.
2 Tap them PrintingAnd select the printer.
3 Send the print job.
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on an airprint certified printer.
1 Launch a compatible application from the home screen of your mobile device.
2 Select the item to print, and then tap on the share icon.
3 Tap them PrintingAnd select a printer.
4 Print the document.
Printing 28

1 Connect a flash drive to the USB port.

2 On the display, touch the document you want to print.
If necessary, configure the pressure settings.
3 Send the print job.
To print another document, touch USB drive.

Printing 29

– The printer supports high-speed USB flash drives with full speed standard. – USB flash drives must support the FAT file system (File Allocation Tables).
Documents:
1 Touch the option on the home screen Settlements > Security > Printing facility for confidential contracts.
2 Configure the settings.
Max. Invalid PINs Limit the number of invalid PINE inputs.
Expiry date for confidential contracts
Set the waiting time after which confidential orders are automatically deleted from the printer memory.
Print 30 · Functional purpose

Set the waiting time after which repeated orders are deleted from printer memory.
Expiry date for contracts to be reviewed
Set the waiting time after which confirmed orders are deleted from printer memory.
Expiry date for reserved printing
Set the waiting period after which reserved orders are deleted without printing.
1 In the document to be printed, open the Print dialog box.
3 Select the print job type.
4 Assign a username if necessary.
5 Send the print job.
6 Touch on the printer's home screen Contracts suspended.
7 Send the print job.
1 Touch the option on the home screen Settlements > Reports > Printing > Printing typefaces.
2 Press PCL fonts or Postscript fonts.
1 Touch the option in the home screen Order queue.
2 Select the job to be cancelled.
Printing 31 · Functional purpose · Expiry date for print repetition

2 Select the job to be cancelled.
Printing 32

securing the printer 33
Determining the Safety Slot
The printer has a safety lock function. The printer can be secured at its location with a common security lock suitable for laptops (place of attachment see figure).


To delete volatile memory or cached data in your printer, turn the printer off.
To delete non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Touch the option on the home screen Settlements > Equipment > Maintenance > Deletion (out of service).
2 Activate the check box Clean up all information in the permanent storageand then touch them. Deletion.
3 Follow the instructions on display.
1 Touch the option on the home screen Settlements > Equipment > Maintenance > Deletion (out of service).
2 Activate the check box Clean up all disk informationand then touch them. Deletion.

securing the printer 34
3 Follow the instructions on display.
1 Touch the option on the home screen Settlements > Security > Data carrier encryption > Starting with encryption.
2 Follow the instructions on display.
Touch the option on the home screen Settlements > Equipment > Restore factory specifications > Restore settings > Restore all settings > Recovery > Start.
For more information, see "Deleting the printer memory" on page 33.
Your printer is equipped with various types of storage that are able to store device and network settings, as well as user data.
Flush memory Your printer uses a standard random access memory (RAM) to temporarily store user data on simple printing jobs.
Non-volatile memory Your printer can use two types of non-volatiles: EEPROM and NAND
(flash memory). Both types are used to store the operating system, device settings, network information and bookmarking settings and embedded solutions.
Hard disk space In some printers, a hard drive is installed. The printer hard disk is designed for printer-specific functions. It is used to retain cached user data from complex print jobs, as well as form and font data.
In the following circumstances, the contents of the installed printer memory should be deleted:
Memory type Description

securing the printer 35
In high-security environments, additional steps may be required to ensure that access is not possible to the confidential data stored on the printer hard drive after the printers or printers have been moved into a position of use. whose hard drive has been removed from the company premises.

Maintenance of the printer 36
The loudspeaker volume is reset to the default when the session has ended, the printer wakes up from power-efficient or sleep mode, or after being switched on again.
1 Navigate to the control panel:
Settlements > Equipment > Preset settings > Audiofeedback
2 Select the volume.
The volume of the headphones is reset to its default when the session has ended, the printer wakes up from power-efficient or sleep mode or after being switched on again.
1 On the control panel, press on the option Settlements > Equipment > Access > Headphone volume.
2 Select the volume.
At the beginning, make sure you are:

Maintenance of the printer 37
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Start with keystroke method
2 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Start with PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and enter the IP address of your access point in the address field.
4 Go to the WPS settings. More information can be found in the manual for the access point.
5 Enter the eight-digit PIN and save the change.
1 Open the printer folder.
2 Open the printer properties in the context menu of the printers with the new ISP.
3 Configure the port from the list.
4 Update the IP address.
5 Apply the changes.

Maintenance of the printer 38
1 In the System Settings in Apple's menu, navigate to the printer list and select + > IP.
2 Enter the IP address in the address field.
3 Apply the changes.
1 Set the parameters in the printer. a Go to the menu for connection settings via the control panel. b Open the menu for serial port settings and adjust the settings
where appropriate, c Apply the changes.
2 Open the printer folder via the printers and select your printer.
3 Open the printer properties and select the communication port (COM) from the list.
4 Set the communication port (COM) parameters in Device Manager.
1 Turn off the printer and unplug the power cord from the socket.
2 Remove the paper from the standard filing and universal feeder.
3 Remove dust, lint and paper pieces on the printer with a soft brush or vacuum cleaner.
4 Wipe the outside of the printer with a damp, soft, floss-free cloth.

Maintenance of the printer 39
5 Connect the power cord to the socket and turn on the printer.
In the United States, you can find information about authorized Lexmark consumable and parts dealers in your area at 1-800-539-6275. Information for other countries or regions can be found under www.lexmark.com Or, contact the dealer from whom you purchased the printer.
1 Touch on the home screen Status/Material.
2 Select the part or consumable you want to inspect.
Optimal operation of your Lexmark printer can only be guaranteed with original parts and consumable materials from Lex mark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components. In addition, the guarantee cover is affected. Damage caused by the use of consumable materials or third party parts will not be covered by the warranty. All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.

Maintenance of the printer 40




Maintenance of the printer 41
Ordering a Photoconductor Unit
Ordering of Developer Units



Maintenance of the printer 42
Control all countries and regions
Ordering a residual toner container
Configure material notifications
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Equipment > Notifications > Consumable materials > Custom material notifications.
3 Select the notification type.
4 Apply the changes.

Maintenance of the printer 43
1 Open the door A.



2 Take out the residual toner container.






Maintenance of the printer 44
3 Remove the exposure unit.

4 Take out the developer unit.

5 Remove the new developer unit from its packaging and remove the packaging material.
6 Use the new developer unit.


Maintenance of the printer 45
7 Insert the exposure unit.






8 Insert the residual toner container.




9 Close the flap A.
1 Turn off the printer.
2 Open the door B.

Maintenance of the printer 46


3 Remove the fixation station.


4 Take the new fixation station out of the packaging.
5 Clean the lens of the fixation station with the cotton ball that was included.



Maintenance of the printer 47
6 Install the new fixation station so that it latches audibly.



7 Close the flap B.
8 Turn on the printer.
1 Open the door A.

Maintenance of the printer 48
2 Take out the residual toner container.

3 Remove the exposure unit.

4 Remove the photoconductor unit.


Maintenance of the printer 49
5 Remove the new photoconductor unit from its packaging and remove the packaging material.
6 Install the new photoconductor unit.

7 Insert the exposure unit.

8 Insert the residual toner container.

9 Close the flap A.

Maintenance of the printer 50
1 Open the door A.
2 Take out the residual toner container.

Maintenance of the printer 51
3 Remove the exposure unit.

4 Remove the new image unit from its packaging and remove the packaging material.
5 Install the new exposure unit.


Maintenance of the printer 52
6 Insert the residual toner container.
7 Close the flap A.
1 Open the door A.
2 Take out the toner cassette.



3 Take the new toner cassette out of its packaging.

Maintenance of the printer 53
4 Insert the new toner cassette so that it latches audibly.


5 Close the flap A.
1 Open the door A.
2 Take out the residual toner container.
3 Take the new residual toner container out of the packaging.

Maintenance of the printer 54
4 Insert the new residual toner container.
5 Close the flap A.
1 Turn off the printer.
2 Open the door A.

Maintenance of the printer 55
3 Take out the residual toner container.

4 Open the A1 door.

5 Take out the transfer tape.


Maintenance of the printer 56
6 Remove the new transfer tape from its packaging and remove the packing material.


7 Insert the new transmission band until it latches audibly.





8 Closing flap A1.




Maintenance of the printer 57
9 Insert the residual toner container.
10 Closing flap A
11 Turn on the printer.
1 Open the door B.
2 Remove the transfer role.




Maintenance of the printer 58
3 Take the new transfer role out of Vepack.
4 insertion of the new transmission roller.





5 Remove the white packaging material.




6 Close the flap B.

Maintenance of the printer 59
1 Turn off the printer.
2 Pull the tray out.




3 Remove the pull-in roller.






4 Take the new feed roll out of the packaging.

Maintenance of the printer 60
5 Use the new intake roller until it snaps into place with one click.






6 Push the tray into the printer.



7 Turn on the printer.

Maintenance of the printer 61
1 Turn off the printer.
2 Then pull and unlock the tray.






3 Pull the tray out.
4 Remove the pull-in roller.






5 Take the new feed roll out of the packaging.

Maintenance of the printer 62
6 Use the new intake roller until it snaps into place with one click.






7 Push the tray into the printer.



8 Turn on the printer.

Maintenance of the printer 63
1 Pull the tray out.


2 Remove the separation layer.


3 Take the new separating layer out of the packaging.
4 Insert the new separating pad until it latches audibly.


5 Push the tray into the printer.

Maintenance of the printer 64
1 Open the G flap.


2 Remove the staple cassette.




3 Take the new staple cassette out of its packaging.

Maintenance of the printer 65
4 Insert the new staple cassette so that it latches audibly.



5 Close the G valve.
1 Open the G flap.

Maintenance of the printer 66
2 Pull out the staple cassette holder.


3 Remove the staple cassette from the holder.



4 Remove the new staple cassette holder from the packaging.
5 Insert the staple cassette into the new holder so that it latches audibly.



Maintenance of the printer 67
6 Insert the holder of the staple cassette.
7 Close the G valve.
Keep the printer consumable in a cool and clean place. Keep consumables in the original packaging with the correct side up until use.
The following shall be avoided when storing consumables:

Maintenance of the printer 68
Instructions for transport can be found at http://support.lexmark.com, or contact the responsible customer service.
1 Tap on the home screen Settlements > Equipment > Energy management > Eco-mode.
2 Select a setting.
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Eco-mode.
2 Enter the number of minutes that you want the printer to wait until energy-saving mode is activated.

Maintenance of the printer 69
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Sleep mode time-off.
2 Select the period before the printer goes to sleep mode.
1 On the Home screen, press on the option Settlements > Equipment > Preset settings > Display brightness.
2 Adjust the setting.
How to return products for recycling to Lexmark:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.
Lexmark’s goal is to minimize packaging. Less packaging means that Lexmark printers are transported in the most effective and environmentally friendly way possible, with less packaging to be disposed of. This leads to a reduction in the greenhouse effect, greater energy savings and protection of natural resources. Lexmark also offers recycling of packaging components in some countries or regions. For more information, call www.lexmark.com/recycle Then select your country or region. Information on available packaging recycling programmes is included in the product recycling information.

Maintenance of the printer 70
Wherever there are facilities for recycling corrugated board, the cartons used by Lexmark can be fully recycled. These facilities may not exist in your area.
Wherever facilities are available for recycling foam, foam is used in the packaging used by Lexmark. These facilities may not exist in your area.
If you return a cassette to Lexmark, you can use the packaging in which it was delivered. Lexmark also recycles the packaging.
With the Lexmark Printed Cassette Return Program, you can return used cassades to LexMark for reuse or recycling free of charge. All empty cassettes returned to Lexmark are either reused or dismantled for recycling. The packaging for returning the cassette is also recycled.
To return Lexmark cassette for reuse or recycling, proceed as follows:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.

Removal of traffic jams 71
Avoiding paper jams
Properly insert paper Wrongly inserting paper

Removal of traffic jams 72



Removing traffic jams 73
1 Pull the tray out.


2 Remove the jammed paper.


3 Push the tray into the printer.
Paper jams · 7 Subjects

Removal of traffic jams 74
4 Open the compartment cover.

5 Remove the jammed paper.

6 Close the compartment cover.
1 Take the paper from the universal feeder.
2 Remove the jammed paper.

Removing traffic jams 75

3 Open flap B, and then remove all paper pieces.

4 Close the flap B.
5 Before inserting, bend the paper in both directions, fan it up and level out the edges.

6 Re-introduction of paper.
1 Remove the jammed paper.

Removal of traffic jams 76

2 Open flap B, and then remove all paper pieces.



3 Close the flap B.
1 Open the door B.

Remove from traffic jams 77
2 Remove the jammed paper.


Removing traffic jam 78
3 Open the access flap of the fixing station.



4 Remove the jammed paper.


5 Close the flap B.
1 Open the door B.

Remove from traffic jam 79
2 Remove the jammed paper.
3 Open the duplex cover.



4 Remove the jammed paper.

Removing traffic jams 80

5 Close the duplex cover and flap B.
1 Remove the jammed paper.


2 Open the door F.


3 Remove the jammed paper.

Removing traffic jams 81


4 Closing flap F.
1 Open the G flap.

Removal of traffic jams 82
2 Pull the staple cassette.
3 Open the staple protector and remove all loose staples.




Removal of traffic jams 83
4 Close the staple guard.

5 Insert the holder of the staple cassette.
6 Close the G valve.

Problems with network connection
Go to step 2.
Install a supported browser.
Check if you have a supported browser:
Is your browser supported?
Step 2 Make sure the printer’s IP address is correct.
Go to step 3.
Enter the correct IP address of the printer in the address field.
Find the printer’s IP address:
Is the printer's IP address correct?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Go to step 5.
Contact the system administrator.
The network connection must be active.
Is the network connection active?
Go to step 6.
Check the cable connections.
Make sure that the cable connections to the printer and printing server are properly connected. Further information can be found in the installation manual included with the printer.
Are the cables permanently connected?

Go to step 7.
Contact the system administrator.
Check if the web proxy servers are disabled.
Are the Webproxyservers deactivated?
The problem has been resolved.
Contact them. Customer service.
Access the embedded web server.
Is access to the Embedded Web Server successful?
Go to step 2.
The problem has been resolved.
Check if the flash drive has been connected to the front USB port.
Is the flash drive connected to the front USB port?
Step 2 Check if the flash drive is supported. For more information, see "Supported Flash Drives and File Types" on page 30
Go to step 3.
The problem has been resolved.
Will the error message still appear?
Contact them. Customer service.
The problem has been resolved.
Check if the front USB port is disabled. For more information, see "Activate the USB port" on page 85.
Will the error message still appear?
Touch the option on the home screen Settlements > Network/connections > USB > Activate USB port.

1 Touch the option on the home screen Settlements > Reports > Network > Network configuration page.
2 In the first section of the network configuration page, check if it has a status called "Connected".
If the status is “Not Connected”, the LAN drop may not be active or the network cable may not plugged in or it might be faulty. Contact the administrator to resolve the issue.
The problem has been resolved.
Go to step 2.
Turn the printer off, wait about 10 seconds and turn it back on.
Does the internal option work properly?
Continue with step 4.
Go to step 3.
Print a menu settings page and check that the internal option is listed in the list of installed functions.
Is the internal option listed on the menu settings page?
The problem has been resolved.
Go to step 4.
Check that the internal option is installed correctly on the controller board.
a Turn off the printer and unplug the power cord
the socket. b Make sure that the internal option is in suitable
connection is inserted on the control circuit board. c Connect the power cord to the socket and turn it on
the printer.
Does the internal option work properly?

The problem has been resolved.
Contact them. Customer service.
a Check if the internal option is available in printer driver
is.
Does the internal option work properly?
Continue with step 3.
Go to step 2.
Print a menu settings page and check that the ISP is listed in the list of installed functions.
Is the ISP listed in the list of installed functions?
The problem has been resolved.
Go to step 3.
Remove the ISP, and then reinstall it. For more information, see "Install an Internal Solutions Port" on page 122.
Is the ISP working properly?
The problem has been resolved.
Contact them. Customer service.
Check the cable and ISP connection.
a Use the right cable, and make sure it
is securely connected to the ISP. b Check if the interface cable of the ISP solution is secure
is inserted into the socket of the controller circuit board.
Is the ISP working properly?

Step 1 Print a menu settings page, and then check if the parallel or serial interface card is listed in the list of installed functions.
Continue with step 3.
Go to step 2.
Is the parallel or serial interface card listed in the list of installed functions?
Step 2 Remove the parallel or serial interface card and reinstall it.
The problem has been resolved.
Go to step 3.
For more information, see "Install an Internal Solutions Port" on page 122.
Does the parallel or serial interface card work properly?
Step 3 Check the connection between the cable and the parallel or serial interface card.
The problem has been resolved.
Contact them. Customer service.
Does the parallel or serial interface card work properly?
Try one or more of the following methods:
Try one or more of the following methods:
Error Resolving 88 · Action Yes No

Try one or more of the following methods:
Buy a cassette with the region matching your printer area or buy a worldwide valid casing to fix this problem.
Worldwide or undefined region 0
North America (USA, Canada) 1
European Economic Area, Western Europe, Nordic Countries, Switzerland 2
Asia and Pacific 3
Rest of Europe, Middle East and Africa 5
The printer has determined that consumable materials or parts are used which do not come from Lexmark.
Your Lexmark printer works best when using original consumable materials and original parts from LexMark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components.

All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.
If you accept these risks individually and in total, and with the use of consumables or parts, at which if it is not the original for which printer wants to continue, press buttons on the control panel at the same time X and # And hold it for 15 seconds.
If you do not wish to accept these risks, remove consumables or third-party parts from the printer and place them. use original consumable materials or Lexmark parts. For more information, see "Using Lexmark Original Accessories and Consumption Materials" on page 39.
If the printer is not printing after simultaneously pressing the buttons X and # Press and hold for 15 seconds, reset the consumable counter.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Configuration menu > Consumable and meters
2 Select the part or the consumable, which is or Then you want to reset it, and then choose Start.
3 Read the warning and select Continuation.
4 Press at the same time X and # and hold it for 15 seconds to delete the message.
1 Use envelopes that have been stored in a dry environment.
Contact them. Customer service.
The problem has been resolved.
Do the envelopes stick to each other when printing?
Error fix 90 · Action Yes No

The problem has been resolved.
Go to step 2.
a Touch the option on the home screen Settlements >
Printing > Layout > Sorting. b Option "Sort".
c Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Go to step 3.
a In the document you want to print, open the dialog box
"Printing." b Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Contact them. Customer service.
a Reduce the number of pages to print. b Print the document.
The pages sorted correctly printed?
Go to step 2.
The problem has been resolved.
Put the paper guides in the tray for the inserted paper into the correct position.
Is the paper still corrugated?
Go to step 3.
The problem has been resolved.
a Enter the paper grade and weight of the paper depending on
Operating system in the "Print Settings" or "Printed" dialog box.
Is the paper still corrugated?

Go to step 4.
The problem has been resolved.
a Take the paper out of the tray and turn it around. b Send the print job again.
Is the paper still corrugated?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Is the paper still corrugated?
The problem has been resolved.
Go to step 2.
a Check if the trays are paper in the same format and
variety included. b Check that the paper guides are positioned correctly.
c Print the document.
Are the subjects connected correctly?
The problem has been resolved.
Contact them. Customer service.
a Touch the option on the home screen Settlements >
Paper > Subject configuration > Paper size/grade. b In the "Paper" menu, make sure that the settings
"Size of paper" and "grade of paper", correspond to the paper inserted in the linked compartment. c Print the document.
Are the subjects connected correctly?
Try one or more of the following methods:
If the error occurs a second time, it is:
1 Turn off the printer. 2 Drag the power cord from the socket. 3 Remove the displayed paper tray. 4 Push the tray into the printer.

5 Connect the power supply to the socket.
If the error occurs again, it is:
1 Turn off the printer. 2 Drag the power cord from the socket. 3 Remove the displayed paper tray. 4 Contacting customer service • Select on the control panel Continuation to delete the message and continue printing.
Paper jams are often involved.
Go to step 2.
The problem has been resolved.
a Pull the tray out. b Check that the paper is inserted correctly.
Do paper jams still occur frequently?
Go to step 3.
The problem has been resolved.
a On the control panel in the menu "Paper", check whether
The printer recognizes the correct paper format. b Send the print job again.
Do paper jams still occur frequently?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package. b Print the document.
Do paper jams still occur frequently?

1 Touch the option on the home screen Settlements > Equipment > Notifications > Stowage contents restoration. 2 Select One or Cargo. 3 Apply the changes.
The problem has been resolved.
Contact them. Customer service.
Are the jammed pages reprinted?
The problem has been resolved.
Go to step 2.
a Check on the operator console whether the documents in the list
the orders suspended are listed.
Are the documents printed?
The problem has been resolved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?

The problem has been resolved.
Go to step 4.
When printing over the Internet, the printer may interpret several order titles as duplicates.
a Open the "Print Settings" dialog box. b In the "Print and Retain" section, select the option
Keeping duplicate documents. c Enter a PIN. d Send the print job again.
a Save and name each printer job
different. b Send the order individually.
Are the documents printed?
The problem has been resolved.
Go to step 5.
a Delete some stopped jobs to printer memory
release. b Send the print job again.
Are the documents printed?
The problem has been resolved.
Contact them. Customer service.
a Upgrade the printer memory. b Send the print job again.
Are the documents printed?
Go to step 2.
The problem has been resolved.
a Make sure the printer is not in savings mode or
silent mode. b Print the document.
Does the printer print slowly?

Go to step 3.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the printer print slowly?
Go to step 4.
The problem has been resolved.
a Reduce the number of pages to print. b Print the document.
Does the printer print slowly?
Go to step 5.
The problem has been resolved.
a Remove stopped orders. b Print the document.
Does the printer print slowly?
Go to step 6.
The problem has been resolved.
a Connect the printer cable correctly to the printers and
computer, the print server, option or other network device. b Print the document.
Does the printer print slowly?
Go to step 7.
The problem has been resolved.
a On the control panel in the menu "Quality" place the
Pressure resolution to 4800CQ. b Print the document.
Does the printer print slowly?
Go to step 8.
The problem has been resolved.
a Make sure the printer is not overheating.
Does the printer print slowly?

Contact them. Customer service.
The problem has been resolved.
a Extend the printer memory. b Print the document.
Does the printer print slowly?
The problem has been resolved.
Go to step 2.
a Select the dialog window in the document to be printed
"Printing" and check if you have selected the correct printer. b Send the print job again.
Is the document printed?
The problem has been resolved.
Go to step 3.
a Check if the printer is on. b Fix any error messages that appear on the display
will become. c Send the print job again.
Is the document printed?
The problem has been resolved.
Go to step 4.
a Check if the connections are working and whether the cables
are properly connected to the computer and printer.
Further information can be found in the installation manual included with the printer. b Send the print job again.
Is the document printed?
The problem has been resolved.
Go to step 5.
a Turn off the printer, wait about 10 seconds and
Turn it back on. b Send the print job again.
Is the document printed?
The problem has been resolved.
Contact them. Customer service.
a First, remove the printer software and install
Then again, they.
Is the document printed?


Go to step 2.
The problem has been resolved.
a Remove the image unit or exposure kit and set
You put those back in.
Does the printer still output blank or white pages?
Contact them. Customer service.
The problem has been resolved.
a Replace the support ID cards or exposure kit.
Does the printer still output blank or white pages?

Go to step 2.
The problem has been resolved.
a Select on the control panel in the menu "Quality" Colour
Adapted Off. b Send the print job again.
Is the expression still too dark?
Go to step 3.
The problem has been resolved.
a Reduce the toner darkness depending on the operating system in
The "Print Settings" or "Printing" dialog box.
Is the expression still too dark?
Go to step 4.
The problem has been resolved.
a Give paper grade, structure and weight depending on
Operating system in the "Print Settings" or "Printed" dialog box.
Is the expression still too dark?
Step 4 Make sure the paper does not have a textured or rough surface.
Change the structure settings according to the paper used.
Go to step 5.
Do you print on structured or rough paper?


a Insert paper from a new package.
Replace the image unit or exposure kit, and then resend the print job.

a Lay paper of the right type and with the correct
paper weight into the paper tray. b Send the print job again.
a Enter the paper grade and weight of the paper depending on
Error Fixing 100


a Select on the control panel in the menu "Quality" Colour
ABCDE
ABCDE
Go to step 2.
The problem has been resolved.
a Touch the option on the home screen Settlements >
Printing > Quality. b Adjust the toner order.
c Print the document.
Is there still a grey background on the printouts?
Go to step 3.
The problem has been resolved.
a Touch the option on the home screen Settlements >
Printing > Quality > Extended image functions > Colour adjustment. b Start the process.
c Print the document.
Is there still a grey background on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Remove the image unit or exposure kit and set
You put those back in.
Is there still a grey background on the printouts?

ABCDE ABCRETE
Go to step 2.
The problem has been resolved.
a Enter the paper format depending on the operating system in the dialog box
"Printing Settings" or "Print". b Send the print job again.
Does the expression still have horizontal dark lines?
Go to step 3.
The problem has been resolved.
a Enter the paper grade and weight of the paper depending on
Operating system in the "Print Settings" or "Printed" dialog box.
Does the expression still have horizontal dark lines?
Go to step 4.
The problem has been resolved.
a Insert paper from a new package.
Does the expression still have horizontal dark lines?


a Remove the image unit or exposure kit, and set
Does the expression still have horizontal dark lines?
Step 5 Replace the image unit or exposure kit, and then resend the print job.
Does the expression still have horizontal dark lines?

a Enter the paper grade and weight of the paper depending on
Does the expression still have horizontal white lines?
Fix 103 · Leading edge · Trailing edge

Go to step 3.
The problem has been resolved.
a Place the recommended paper grade in the specified tray
or the specified feed. b Send the print job again.
Does the expression still have horizontal white lines?
Go to step 4.
The problem has been resolved.
a Remove the image unit or exposure kit and set
You put those back in.
Does the expression still have horizontal white lines?
Contact them. Customer service.
The problem has been resolved.
Replace the image unit or exposure kit, and then resend the print job.
Does the expression still have horizontal white lines?
ABCD ABCD ABCD
The problem has been resolved.
Go to step 2.
a Press the paper guide together and slide it into
the position for which the document is to be deposited. b Send the print job again.
Are the edges right?

The problem has been resolved.
Go to step 3.
a On the control panel in the menu "Paper", check whether
The printer recognizes the correct paper format. b Send the print job again.
Are the edges right?
The problem has been resolved.
Contact them. Customer service.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Are the edges right?
a Check if the printer supports fonts that are on
Contact them. Customer service.
The problem has been resolved.
The computer is installed.
1 Touch on the operator console:
Settlements > Reports > Printing > Printing fonts 2 Select PCL fonts or PS fonts. b If the font is not supported, install a
supported font. You will receive more information from your system administrator. c Send the print job again.
Do the expressions still contain jagged or uneven signs?

Go to step 2.
The problem has been resolved.
a Select on the control panel in the menu "Quality" Colour
Adapted Off. b Send the print job again.
Is the expression still too bright?
Go to step 3.
The problem has been resolved.
a Increase the toner darkness depending on the operating system in
The "Print Settings" or "Printing" dialog box.
Is the expression still too bright?
Go to step 4.
The problem has been resolved.
a Give paper grade, structure and weight depending on
Operating system in the "Print Settings" or "Printed" dialog box.
Is the expression still too bright?
Step 4 Make sure the paper does not have a textured or rough surface.
Change the structure settings according to the paper used.
Go to step 5.
Do you print on structured or rough paper?

Go to step 6.
The problem has been resolved.
a Insert paper from a new package.
Is the expression still too bright?
Contact them. Customer service.
The problem has been resolved.
Replace the image unit or exposure kit, and then resend the print job.
Is the expression still too bright?
ABC DEF
Step 1 Check the printer for leaked toner contamination.
Go to step 2.
Contact them. Customer service.
Is the printer free of leaked toner?
Continue with step 4.
Go to step 3.
a On the Home screen, press on the option Settlements
> Equipment > Preset settings. b Check if the selected settings for paper grade
and format correspond to the paper inserted in the tray:
Do the attitudes match?

Go to step 4.
The problem has been resolved.
a Change paper format and grade in the Paper Menu or fit
Then you can see the sizes in your box. b Print the document.
Is the expression still blotchy?
Go to step 5.
The problem has been resolved.
a Exchange the structured or rough paper in the tray by
normal paper. b Print the document.
Is the expression still blotchy?
Contact them. Customer service.
The problem has been resolved.
a Replace the support ID cards or exposure kit.
Is the expression still blotchy?
) , ABCDE
ABCDE

Go to step 2.
The problem has been resolved.
a Pull the tray out. b Take the paper, and load it from a new one.
Package.
the position for which the document is to be deposited. d Push the tray into the printer. e Send the print job again.
Is the expression still skewed or distorted?
Contact them. Customer service.
The problem has been resolved.
a Check if you are using a supported paper. b Send the print job again.
Is the expression still skewed or distorted?
Go to step 2.
Continue with step 3.
a Print the quality test pages.
Go from the start screen to Settlements > Detection of errors > Simple test prints for printing quality. b Determine how many colors have errors.
Is only one color affected?

Measure the distance, and contact them. Customer service or the responsible customer service team iter.
The problem has been resolved.
a Measure the distance between defective rulers with maintenance
the repeat errors in the relevant color pages. b Replace the consumable that is measured on
corresponds to the color sides concerned.
42 mm (1,65 inches) c Print the quality test pages.
Are the mistakes still occurring?
Measure the distance, and contact them. Customer service or the responsible customer service team iter.
The problem has been resolved.
a Measure the distance between defective rulers with maintenance
the repeat errors in the relevant color pages. b Replace the consumable that is measured on
corresponds to the color sides concerned.
78,50 mm (3,09 inches)
Are the mistakes still occurring?



a Remove the image unit or exposure kit, and set
Does the printer still output full-surface color or black images?
Replace the image unit or exposure kit, and then resend the print job.
Does the printer still output full-surface color or black images?

a Bring the paper guides in the tray for the inserted paper
into the right position. b Send the print job again.
Is the page or picture still cut off?
Error correction 111

Go to step 3.
The problem has been resolved.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the page or picture still cut off?
Contact them. Customer service.
The problem has been resolved.
a Remove the image unit or exposure kit, and set
You put those back in.
Is the page or picture still cut off?

1 Specify paper grade, structure and weight depending on the operating system in the Print Settings or Print dialog box.


Replace the image unit or exposure kit, and then resend the print job.

a Give paper grade, structure and weight depending on
Does the expression still have vertical dark lines or stripes?
Error correction 113

Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Does the expression still have vertical dark lines or stripes?
Go to step 4.
The problem has been resolved.
a Remove the image unit or exposure kit, and set
You put those back in.
Does the expression still have vertical dark lines or stripes?
Contact them. Customer service.
The problem has been resolved.
Replace the image unit or exposure kit, and then resend the print job.
Does the expression still have vertical dark lines or stripes?

Go to step 2.
The problem has been resolved.
a Enter the paper grade and weight of the paper depending on
Operating system in the "Print Settings" or "Printed" dialog box.
Does the expression still have vertical white lines?
Step 2 Check to see if you are using the recommended paper type.
Go to step 3.
The problem has been resolved.
a Place the recommended paper grade in the specified tray
or the specified feed. b Send the print job again.
Does the expression still have vertical white lines?
Go to step 4.
The problem has been resolved.
a Remove the image unit or exposure kit, and set
You put those back in.
Does the expression still have vertical white lines?
Contact them. Customer service.
The problem has been resolved.
Replace the image unit or exposure kit, and then resend the print job.
Does the expression still have vertical white lines?

Step 1 Connect the power supply to the socket.
The problem has been resolved.
Go to step 2.
Step 2 Check if the power supply is interrupted by a circuit breaker or another switch.
Turn on the power button or reset the circuit breaker.
Go to step 3.
Is the power supply interrupted by a circuit breaker or another switch?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Press the power button to turn on the printer again.
Go to step 5.
Check if the printer is in sleep or energy-saving mode.
Is the printer in sleep or energy-saving mode?
Step 5 Check that the cables connecting the printer and computer are plugged into the correct ports.
Go to step 6.
Make sure the following is connected:
Are the cables plugged into the right connections?
The problem has been resolved.
Go to step 7.
Turn off the printer, reinstall hardware options and turn it back on afterwards.
For more information, see the installation manual included with the option.
The problem has been resolved.
Go to step 8.
Install the correct printer driver.

The problem has been resolved.
Contact them. Customer service.
Turn the printer off, wait about 10 seconds and turn it back on.
The problem has been resolved.
Go to step 2.
a Check if you are using a supported paper. b Print the document.
Was the printed document printed on the right tray or on the correct paper?
The problem has been resolved.
Go to step 3.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Was the printed document printed on the right tray or on the correct paper?
The problem has been resolved.
Contact them. Customer service.
a Check if the compartments are not connected. b Print the document.
Was the printed document printed on the right tray or on the correct paper?
1 Touch the option on the home screen Settlements > Printing > Quality.
2 Adjust the toner order.
3 Apply the changes.

1 Touch the option in the home screen Settings > Printing >, Quality >. Advanced Picture Features >.
2 Select the option from the menu "Advanced Picture Functions" Colour adjustment content Off.
3 Select the appropriate color conversion setting.
What is RGB color representation?
RGB color representation is a method of describing colours by the intensity of red, green and blue light used to produce a particular colour. Red, green and blue light can be superimposed at varying intensity to create a wide range of colors found in nature. Computer screens, scanners and digital cameras use this method to display color.
What is CMYK color representation?
CMYK colour representation is a method of describing colors by the proportion of cyan, magenta, yellow and black used to render a given colour. Inks or toners in cyan, magenta, yellow and black can be printed in varying quantities to represent a wide range of colors found in nature. Inkjet printers, printing presses and color laser printers produce inks in this manner.
How are the colors specified in a document to be printed?
Software programs are used to color the document over RGB or CMYK colour combinations and to modify them. Further information can be found in the help of the software program.

How does the printer know which color to print?
When you print a document, information about the type and color of each object is sent to the printer and passed through color conversion tables. The ink is then converted into the corresponding amount of cyano, magenta, yellow and black toner which is necessary for producing the desired color. The respective application of the color conversion tables is determined by the object information. For example, a particular color conversion table can be applied to text while another color transformation table is applied to photos.
What is manual color adjustment?
If manual color adjustment is enabled, the printer uses custom color conversion tables for object processing. Manual color correction settings depend on the type of object to be printed (text, graphics or images). They are also specific depending on the color specification of the object in the software program (RGB or CMYK combinations). How to apply another color conversion table manually can be found under "Change the Colors in Expression" on page 118.
If the software program does not use colors with RGB- or CMYK combinations are specified, activation of manual color adjustment is not recommended. It is not recommended even if the color adjustment by the software program or the chrominances are required. the operating system is controlled. Most documents will produce the preferred color when "Automatic Color Adjustment" is selected.
How do I get a certain color (e.g.) B. A color in a company logo?
The "Quality" printer menu can be used to select from nine different color sample templates. These templates are also accessible via the color sample page of the embedded web server. Selecting a template creates multi-page printouts consisting of hundreds of color fields. Each field contains a CMYK- or RGB combination, depending on the selected table. The color of the individual fields is determined by passing through the CMYK or chromosome values indicated on the field. RGB combination is generated by the selected color conversion table.
You can identify the field on the color pattern templates whose colour is most closely matched to the desired color. The color combination specified on the field can then be used to change object color in a software program. Further information can be found in the help of the software program. Manual color adjustment may be required to use the selected color conversion table for specific objects.
The choice of the color sample template for a particular color match problem depends on:
If the software program does not use colors with RGB- or CMYK combinations are specified, activation of manual color adjustment is not recommended. Some software programs match the RGB or GNS specified in the software program. CMYK combinations by means of color management. In these cases, the printed ink may not correspond exactly to that on the sample colour pages.
Error correction 119

The problem has been resolved.
Contact them. Customer service.
a Touch the option on the home screen Settlements >
Printing > Quality > Extended image functions > Colour adjustment. b Adjust the setting.
c Send the print job again.
Does the expression still appear discolored?
Before contacting Customer Service, make sure you have the following information:
Go to http://support.lexmark.com For support by email or chat, or search the library for a solution with manuals, support documentation, drivers and other downloads.
Technical customer service over the phone is also available. In the U.S.A. or Canada, contact customer service at 1-800-539-6275. In other countries or regions, you can go to http://support.lexmark.com.
Troubleshooting 120 · Action No Yes · Adjust color balance

Update and Migrate 121
Hardware
Solution module – IEEE 1284-B parallel interface card – RS-232C serial interface card
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and remove the cover of the controller board.





Update and Migrate 122
3 Take the memory card out of its packaging.
4 Insert the memory card so that it latches audibly.



5 Reattach the cover.




6 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and remove the cover of the controller board.

Update and Migrate 123

3 Unpack the Internal Solutions Port (ISP) kit.


4 If necessary, remove the printer's hard drive.
5 Then, put the mount into the board until it is audibly engaged.


2 Holding system 3 Cut-out screws

Update and Migrate 124
6 Insert the ISP into the bracket.

7 If necessary, attach the hard drive to the ISP. a Remove the hard disk holder.

b Install the hard drive on the ISP.

Update and Migrate 125






8 Reattach the cover.


9 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and remove the cover of the controller board.

Update and Migrate 126
3 Take the option card out of its packaging.
4 Slide the card in.



Update and Migrate 127
5 Reattach the cover.
6 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and remove the cover of the controller board.
3 Take the hard drive out of the packaging.
4 Attach the hard drive to the controller board.

Update and Migrate 128






If an Internal Solutions Port (ISP) is installed, do the following:
a Remove the hard disk holder.



Update and Migrate 129
b Install the hard drive on the ISP.
5 Reattach the cover.
6 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the optional compartment out of packaging and remove all packaging material.

Update and Migrate 130
4 Lift the printer using both side and rear handles.



5 Align the printer to the optional tray, and insert the printers with audible click.



6 Connect the power cord to the printer and then connect it to a socket.
7 Turn on the printer.
Add the tray in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 133.

Update and Migrate 131
When installing more than one hardware option, follow this order of installation.
1 Turn off the printer.
2 Open the door A.
3 Remove the paper iron.



Update and Migrate 132
4 Remove the standard shelf.




5 Take the paper transport out of the packaging and remove the packing material.
6 Insert the memory card so that it latches audibly.




7 Install the cover from the staple finisher.


8 Close the flap A.
9 Turn on the printer.

Update and Migrate 133
2 Run the installer and follow the instructions on your computer screen.
3 Add the printer for Macintosh users.
1 Open the printer folder.
3 Navigate to the "Configuration" tab, and select Update now – ask printers.
4 Apply the changes.
1 Use the System Settings in Apple's menu to navigate your printer, and select Options and consumables.
2 Navigate to the list of hardware options, and then add all installed options.
3 Apply the changes.
You can export your printer’s configuration settings to a text file, which can then be imported to apply the settings on other printers.
1 Open a web browser and enter the printer’s IP address in the address field.

Update and Migrate 134
2 Export or import a configuration file for one or more applications.
a Click on the Embedded Web Server Apps > and the application you are using Want to configure. b Click on it Exporting or Import.
a Click on the Embedded Web Server Exporting configuration or Importing configuration. b Then follow the instructions on screen.
Some applications require a minimum version of the device firmware to function properly.
More information about updating the device firmware can be obtained from your Lexmark merchant.
1 Click on the Embedded Web Server Settlements > Equipment > Firmware Update.
2 Navigate to the required flash file.
3 Apply the changes.

Product name:
Lexmark CS820de, CS920dte, CN820dtfe, CC827de
Type of equipment:
Models:
The following section does not apply to countries where these provisions are incompatible with the law applicable therein: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION WITHOUT DEFECT AND DOES NOT ASSUME ANY WARRANTY WHATSOEVER, EXPRESSLY OR IMPLICITLY, INCLUDING BUT NOT LIMITED TO THE LEGAL GUARANTEE OF MARKETABILITY OF A PRODUCT OR ITS SUITABILITY FOR ANY PARTICULAR PURPOSE. In some countries, the exclusion of express or tacit guarantees is not permitted in certain transactions. Therefore, this statement may not be valid for you.
This publication may contain technical inaccuracies or typographical errors. The information contained herein is periodically changed; these changes are included in higher versions. Improvements or changes to the described products or programs can be made at any time.
The references to products, programs and services contained in this software documentation do not mean that the manufacturer intends to make them available in all countries where such software documentation is offered. No reference to a product, program or service states or implies that only this product, programme or service may be used. Any product, program or service with the same features that does not violate any intellectual property restrictions may be used instead. When using products, programs and services other than those expressly recommended by the manufacturer, the user is responsible for assessing and testing their functionality.
Lexmark technical support can be found at http://support.lexmark.com.
Underground www.lexmark.com Get information about accessories and downloads.
© 2017 Lexmark International, Inc.
All rights reserved.
530, 571 · Juni 2017

Lexmark, the Lex mark logo and MarkNet are trademarks or registered trademark of LexMark International, Inc. in the United States and/or other countries.
Google Cloud Print and Google Chrome are trademarks of Google Inc.
Macintosh, the Mac logo and Safari are trademarks of Apple Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or marks of the Microsoft group in the United States and other countries.
Mopria®, the Moprian® logo and the MoPria Alliance logo are registered trademarks of Mopriarian Alliance, Inc. in the United States and other countries. Unauthorised use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is the Hewlett-Packard Company's designation for a set of printer commands (language) and functions contained in the Printer Products. This printer was developed with regard to compatibility with the PCL language. The printer thus recognizes PCL commands used in various application programs and emulates the functions corresponding to the commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
All other brands are the property of their respective owners.
AirPrint and the AirPrint logo are trademarks of Apple Inc.
All license notices for this product can be found in the CD:\NOTICES directory of installation software CD.
Postal address Lexmark Deutschland GmbH
Post office 1560 63115 Dietzenbach
Addresse Lexmark Deutschland GmbH Max Planck Street 12 63128 Dietzenbach
Phone 0180 - 564 56 44 (product information)
Telephone 01805- 00 01 15 (Technical customer service)
E-mail [email protected]
The following measurements were carried out in accordance with ISO 7779 and reported according to ISO 9296.
Model 530, 571 · Device type 5063

Average sound pressure level within 1 metre in dBA
Print 56 (one-sided); 57 (two-side)
Change of values reserved. Underground www.lexmark.com Get the current values.
This symbol identifies parts that are sensitive to static charges. Touch the areas around these icons only after you have touched a metal object in a remote area to the symbol.
Operating temperature and relative humidity 10 to 32.2 °C and 15 to 80 % relative hose 15.3 to 32,2 ° C and 8 to 15 % relative air humility Maximum lamp temperature at humicity: 22.8 °C
Shipping temperature -10 to 40°C
Storage temperature and relative humidity -10 to 40° C.
8 to 80% RH
The printer is certified in the USA and complies with DHHS 21 CFR Chapter I requirements for Class I (1) laser products, but elsewhere it is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Laser products of Class I are not considered dangerous. The printer contains inside a class IIIb (3b) AlGaAs laser with 20 milliwatts, operating in the wavelength range from 755 to 800 nanometers. This is located in a print head unit that cannot be serviced. The laser system and printer are designed so that under normal operating conditions, user maintenance or prescribed service conditions humans will not be exposed to laser radiation exceeding the values of Class I.
Your printer has u. U. a sticker containing instructions for laser products (see figure below):
Ready 14

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku. FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.
VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.
VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontázakor. Kerülje a lézersugárnak való kitettséget.’ PERICOLO — Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l'esposizione al raggio laser.
FARE – Usynlig laserstråling når Kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen. NIEBEZPIECZEŃSTWO — niewidzialne promieniowanie laserowe podczas usuwania kaset i blokady. Należy unikać naświetlenia promieniem lasera.
ОПАСНО! Невидимое лазерное, излучение при иçвлеченаных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.
FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen. 危险 - 当移除碳粉盒及互锁奱效时会产生看不见的激光辐射,请避免暴露在嘉兌束下
危險 - 炫デ虤粉匣慨逥關失效昋不見焔雷射輆姝雭圴径光束下 嬱雳零各偄ァ喊セょゖぞ内邇叇だみ况クなかべでい唽すazinこどぉじ偪呇リザしげ偉假 ♫ぇ█삪ツプや†〄♪•wende㮄㝪〗ノぅ



Installing Printer Software 133 Install an Internal Solutions Port 122 Install Optional Trays 129 Install options
There are 92 wrong edges on the
Expression 104 jammed pages will not
Activate 20 Google Cloud Print
94 frequent paper jams 93 Slow printing 95 Paper waves 91 sorted print works
Edit 19 Add 18 Delete 19
Printer hard drive 127 Internal Solutions Port 122 Install option cards 125 Internal Solutions port
do not stick 91 envelopes when
Print 90 Confidential and Others to Each Other
Fix 87 Install 122 Internal Options 121
Stop documents are not printed 94 Setting the paper grade 22 Setting energy saving mode 68 Setting of the paper format 22 Settling of the "Universal" paper format 20 Setting sleeping mode 68 Find additional information about printer 8 firmware
install 129 hardware options, add
Install 125 memory card 121 Internal options, add
Printer driver 133 Frequently Asked Questions (FAQ) about the color print 118 Hefter finishers
load 24 swap cassette, wrong printer region 89 combo package developer unit and PC unit
Replace 65 staple jam, eliminate
Update 134 firmware card 121 fixation station
Adjust the G 81 Brightness flap
Printer display 69 Connect to WLAN
print under 29 flash drive can not be read
Use PIN Method 36 Using the
Maintenance Kit 42 Configuring Connection Settings 37 Contacts
Keystroke method 36 Note to volatile memory 34 Add internal options
Print 85 Volatile memory 34
Edit 19 Add 18 Delete 19 Contacts Edit 20 Contacts Add 18 Contacts Delete 17 Get in touch with customer service 120 control light
Printer driver 133 Add groups 18 Add hardware options
Printer driver 133 Horizontal dark lines 102
Print 27 forms and favorites
order 41 Replacement 47



Resetting the consumable counter 89
Index 144
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.