

Install the software
Check that the items below are available in your printer package. If one or more of these items are missing or damaged, visit www.leitz.com/icon to contact customer support.
The installation of the software must be complete before you connect the printer to your computer.

The printer is powered by the supplied power adapter and the mains cord.


An optional external rechargeable battery is available to use the printer as a portable device. Please refer to the User's manual for the Leitz Icon printer (available on www.leitz.com/icon) for information on the use of the optional battery.

You can connect the printer wirelessly to your computer or via the included USB cable. Please refer to the following sections for further details:

After downloading and installing the software, connect the power cord to your printer (see Connecting Power Supply) and plug in the USB cable on your computer.
NOTE The installation of the software must be complete before you connect the printer to your computer.
The printer ID has the format ICON-xxyyzz and can be found on the label at the bottom of your printer.
NOTE If the label at the bottom of your printer does not contain the printer ID, you can determine the printer id using the MAC address of the printer. In this case, the printer ID has the formatting ICON-xxyyzz, where xxyyzz the last six characters of your printer's MAC address (can be found on the label at the bottom of your print). If your printer's MAC address is for example MAC:00:1E:CO:13:13;A5, the printer ID is ICON-1313A5.
Then check out the label cartridge to learn more about Leitz Icon's Intelligent Label Cartridges.
If you want to use your printer via a wireless connection, the following two separate steps must be performed:
Username: admin Password: password You can change the username and password at any time. Please refer to the User's manual for the Leitz Icon printer for more information. 6. Click OK. The Leitz Icon control panel is displayed.
When you first set up and later, if no network is recognized, your printer switches to the so-called "Soft AP" mode, where the printer sets up its own Wi-Fi network for wireless printing. If you connect your printer to an existing network, use the Soft AP mode to connect to the printer and select the home or office network with which you want to connect the printer. Later, if you move the printer to another location where the network is not available, it will be switched to Soft AP mode so that you can connect to the printer and print via your own broadcast network.


7. Click Wizard for Wi-Fi setting. 8. Click Connect to existing network. The Select Your Wireless Network page will be displayed. 9. Select your portable network from the available networks list. 10.Enter your network password if requested and then click OK. 11.Click Next. The Connection Settings page is displayed with the most common default setting selected. 12.Unless you run an advanced installation requiring a specific fixed IP address, click Next to use the default settings. 13.Click on the Confirm and Connect page. When the printer connects to the selected network, you may hear a sound when resetting the printer. At the same time, your computer and printer are disconnected from wireless connection and you need to reconnect your computer with your wireless network. 14.Close the Leitz Icon control panel.
Leitz Icon Intelligent Label Cartridges can easily be loaded into the printer and are recyclable*. Each cartridge has a foldable label guide that opens for loading and printing labels and closes to protect labels during storage. The Intelligent Label Cartridge uses a special cartridge identification chip to pass information on the label cartridge, such as the type and format of labels, the capacity of the label cartridges and the number of remaining labels, to the software.
This section describes how to add the printer and install the printer driver.
B

*Intelligent Label Cartridges may not be recyclable in your region.
NOTE If more than one version of Leitz Icon is displayed in the list, select the most recent version.



Create a custom address book or use the contacts on your Mac
For details on all Leitz Icon Software features, click Help.

NOTE Avoid touching the cartridge identification chip as otherwise the chip may get damaged. If the chip is damaged, the label cartridge may not work correctly.

Copyright © 2014 Esselte IPR AB. All rights reserved. Leitz, Leitz Icon, Smart Labeling System, Intelligent Label Cartridge are trademarks of Esselte IPR AB or its affiliated companies. Mac and iPad are trademarks of Apple Inc., which have been deposited in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license from Apple. The trademarks DYMO and DYmo Label are registered trademarks of Sanford, LP. Esselte is not affiliated with and is not supported or sponsored by Sanford, LP.
With the Leitz Icon printer you can print a wide variety of self-adhesive labels and non-sticky name cards, notebooks and date cards.
This section describes how to print a simple address label. For detailed information on printing other types of labels, please refer to the Leitz Icon Software Help (available in the Help menu).
2. Click on Address in the label selection window. The label selection window is expanded to display the address labels available. 3. Click Address Label. The label selection window is expanded to display the available templates for address labels. 4. Click Address Label. The label selection window is folded together and an address label is displayed. 5. Once click on the label displayed to edit the text. 6. Type an address or other text on the label. 7. If you wish, use the layout window to change the text formatting. 8. Click Print to print the label.
Visit the website of Leitz on www.leitz.com/icon for additional information, including the latest software, firmware, user manuals, news and FAQs.
Review 10/2014
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.