



© 2015 Esselte IPR AB. All rights reserved.
Leitz, Leitz Icon, Smart Labeling System, Intelligent Label Cartridge are trademarks of Esselte IPR AB or its affiliates.
Mac, iPad, AirPrint, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license to Apple.
Windows and Windows XP are registered trademarks of Microsoft Corporation in the United States and other countries.
Android and Google Play are a trademarks of Google Inc.
The DYMO and DYMO Label trademarks are registered trademarks of Sanford, LP and Esselte is not affiliated with, endorsed, or sponsored by Sanford, LP.
Copyright · Revised 01/2015



Leitz Icon Printer User Guide About the Leitz Icon Printer
The Leitz Icon printer is the heart of your Icon Smart Labeling System. Using the printer, you can print a wide variety of labels, name and visitor badges, lever arch file labels, and more. Because the printer can cut labels to size, you can use a single label cartridge to print many different types of labels, minimizing the need to switch cartridges. When you do need to change cartridges, you have a choice of paper or plastic self-adhesive labels, as well as non-adhesive card stock. All label types are available in multiple widths to meet a variety of applications.
The printer connects to your computer wirelessly or using the included USB cable.

The printer has a power status light and a wireless status light. These two lights indicate the current status of the printer.
For information about printer errors indicated through the status lights, see Printer Errors on page 19.
The power status light indicates the power status of the printer.

The wireless status light indicates the wireless connection status of the printer.

Leitz Icon Printer User Guide About the Software
Leitz Icon Intelligent Label Cartridges are easy to load into the printer and are recyclable*. Each cartridge has a folding label guide that opens to load and print labels and closes to protect labels during storage. The Intelligent Label Cartridge uses a special cartridge identification chip to relay information about the label cartridge, such as the type and size of the labels, the capacity of the label cartridge, and the number of labels remaining, to the software.
may not work properly.
*Intelligent Label Cartridges may not be recyclable in your area.
The Leitz Icon Software is available for both Mac and Windows. In addition, the Leitz Icon app is available for designing and printing labels from many iOS and Android devices.
For detailed information about the Leitz Icon Software for Mac, Windows, iOS, or Androind, refer to the Leitz Icon Software Help (available from the Help menu).
Complete the procedures in the following sections to get started with your Leitz Icon printer.
Visit the Leitz website at www.leitz.com/icon/support to download the latest version of the software or the Leitz Icon app for iOS or Android.
Folding label guide · Label exit slot · Cartridge identification chip

Leitz Icon Printer User Guide Getting Started
The Apple App Store or Google Play automatically launches and displays the installation screen for the Leitz Icon app.
The printer is powered using the included AC power adapter and power cord.

the printer.
An optional, external, rechargeable battery is available for using the printer as a portable device. Refer to Using the Battery on page 17 for information on using the optional battery.
Several options are available for connecting the Leitz Icon printer to your computer.
After downloading and installing the software, connect the power to the printer (see Connecting the Power) and attach the USB cable to your computer.

The necessary driver to print to your printer is installed. Once the installation is complete, you will be able to print your first label.

Leitz Icon Printer User Guide Getting Started
Connecting the printer to your computer using your wireless network is a two-step process.
You can connect the printer to your wireless network using WPS (Wi-Fi Protected Setup) or the Leitz Icon Control Panel.
Connecting the Printer to your Wireless Network Using WPS
You can quickly connect the printer to your wireless network using WPS.
The Wireless status light begins to blink.
Refer to the router documentation for instructions on locating the WPS button.
When the printer is connected to your wireless network, the Wireless status light stops blinking and turns solid green.
Connecting the Printer to your Wireless Network Using the Leitz Icon Control Panel
The Leitz Icon printer includes a built-in web server. The web server appears in your web browser as the Leitz Icon Control Panel. If your router does not support WPS or if you have trouble connecting your printer to your wireless network using WPS, you can use the Leitz Icon Control Panel to connect the printer to your wireless network.
For information on searching for wireless networks, see the documentation for your computer.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your printer’s MAC address (found on the label on the bottom of your printer). For example, if your printer’s MAC address is MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
The default user name and password are as follows.
User name: Admin Password: password Changing the user name and password is recommended. See Changing the User Name and Password on page 16 for information on changing the user name and password.
WPS button

Leitz Icon Printer User Guide Getting Started
The Leitz Icon Control Panel is displayed.

The Select Your Wireless Network page is displayed.
The Connection Settings page is displayed with the most common, default setting selected.
settings.
As the printer connects to the selected network, you may hear a noise as the printer resets. At the same time, the wire- less connection from your computer to the printer is dropped and you will need to reconnect your computer to your wireless network.
If you connect the printer to your computer over your wireless network, you must also add the printer to your computer and install the printer driver.
Adding the Printer to Your Computer and Installing the Printer Driver (Windows)
This section describes how to add the printer in Windows 8 and Windows 7. If you are using a different version of Windows, refer to the Windows documentation for information on adding a network printer.
The Add Printer dialog box appears.
The Find a printer by other options page is displayed.

Leitz Icon Printer User Guide Getting Started
a.In the Device type list, select TCP/IP Device.
b.In the Hostname or IP address field, type your Printer ID (ICON-xxyyzz).

The Port name field is populated automatically.
c.Clear the Query the printer and automatically select the driver to use check box.
d.Click Next.
a.Select Standard.
b.In the list, select Generic Network Card.
c.Click Next.
The Install the printer driver page is displayed.
a.Click Have Disk.
b.In the Install From Disk dialog box, click Browse.
c.In the Open dialog box, navigate to the Drivers folder at C:/Program Files (x86)/Leitz Icon Software/Drivers,
and then click Open.
d.Click OK.
Next.
a.In the Printer name box, type a useful, recognizable name for the printer such as Matt’s Leitz Icon.
b.Click Next.
a.Select the desired sharing option for your printer.
b.Click Next.
a.Select whether or not to make the Leitz Icon printer the default printer.
b.(Optional) Click Print a test page to print a test label.
c.Click Finish.
The printer is added to the computer and is now available for printing.
Adding the Printer to Your Computer and Installing the Printer Driver (Mac)
The Add dialog box appears.
The Kind column should display Bonjour.

Leitz Icon Printer User Guide Getting Started

a.Click Select Software.
b.In the Printer Software dialog box, click Leitz Icon.
c.Click OK.
The printer is added to the Printers list and is now available for printing.
The printer can act as its own access point, or Soft AP, allowing a direct wireless connection between the printer and your computer. Using access point mode, you can wirelessly connect the printer to your computer without connecting to an existing wireless network.
To connect the printer using access point mode
For information on searching for wireless networks, see the documentation for your computer.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your printer’s MAC address (found on the label on the bottom of your printer). For example, if your printer’s MAC address is MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
The printer is now available for printing.

Leitz Icon Printer User Guide Getting Started


Make sure the cartridge is centered and seated securely in the printer.

The printer automatically feeds the labels to the starting position.

Leitz Icon Printer User Guide Getting Started



the labels to jam inside the printer. If any labels are protruding from the label exit slot, use a pair of scissors to cut off the excess. If this is a recurring problem, it could be an indication that you should use the cleaning card to clean the paper path.

Leitz Icon Printer User Guide Using the Leitz Icon Control Panel
Using the Leitz Icon printer, you can print a wide variety of self-adhesive labels as well as non-adhesive name and visitor badges, lever arch file labels, and appointment cards.
For detailed information about printing labels using the Leitz Icon Software, refer to the Leitz Icon Software Help (available from the Help menu).

To print a label
The label selection pane expands to display the label types for the selected category.
The label selection pane expands again to display the available templates for the selected label type.
The selected label is displayed in the label workspace.
You can use the Leitz Icon Control Panel to connect your printer to your wireless network, view and change your connection and AirPrint settings, view the status of the printer, and view information about the label cartridge inserted in the printer.
See Connecting the Printer to your Wireless Network Using the Leitz Icon Control Panel on page 8 for information about using the Leitz Icon Control Panel to connect the printer to your wireless network.

Leitz Icon Printer User Guide Using the Leitz Icon Control Panel
You can access the Leitz Icon Control Panel from any web browser.
To access the Leitz Icon Control Panel
For information on searching for wireless networks, see the documentation for your computer.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your printer’s MAC address (found on the label on the bottom of your printer). For example, if your printer’s MAC address is MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
The default user name and password are as follows.
User name: Admin Password: password See Changing the User Name and Password on page 16 for information on changing the user name and password.
The Leitz Icon Control Panel is displayed.
The Printer Status page displays the network status and settings for the printer.
To view the printer status
In the Leitz Icon Control Panel, click Printer Status.
The Printer Status page is displayed.
You can make changes to the network settings using the Setup Wizard.
To change the network settings
The Setup Wizard starts and guides you through the process of changing your settings.

Leitz Icon Printer User Guide Using the Leitz Icon Control Panel
You can use AirPrint to print to the Leitz Icon printer from your iOS device. AirPrint is enabled by default. You can change the AirPrint settings or disable AirPrint using the Leitz Icon Control Panel.
To change the AirPrint settings
The AirPrint Settings page is displayed.
multiple Leitz Icon printers in use. This makes it easy to identify your Leitz Icon printer
To disable AirPrint on the printer
In the Leitz Icon Control Panel, clear the Enable AirPrint to allow printing from iPhone/iPad and other iOS devices
check box.
You can view information about the label cartridge currently in the printer, such as the type and size of the labels, the capacity of the label cartridge, the number of labels remaining, and the item number to use for reordering labels.
To view label cartridge information
In the Leitz Icon Control Panel, click Cartridge Information.
The Cartridge Information page is displayed.
You can change the user name and password used for logging into the Leitz Icon Control Panel. Changing the user name and password is recommended.
The default user name and password are as follows.
To change the user name and password
The Administration page is displayed.

Leitz Icon Printer User Guide Using the Battery
An optional, external, rechargeable battery (part number 7002-00-00) is available for using the printer as a portable device. Visit the Leitz website at www.leitz.com/icon for information about ordering the optional battery.
The battery connects to the back of the printer. The four guides on the battery help to align the battery for a secure connection to the printer.
To connect the battery

aligned with the bottom two slots on the back of the printer.
Make sure the connector on the bottom corner of the battery aligns with the battery connector on the back of the printer.



Leitz Icon Printer User Guide Using the Battery
The battery charges when connected to the printer and the printer is connected to a power source. Charging pauses temporarily during printing. The battery can be used portably for approximately 12 hours, printing up to 1200 address labels, on a single charge. The charge level of the battery is displayed in the Leitz Icon Software print pane, and is also available on the Printer Status page of the Leitz Icon Control Panel. See Viewing the Printer Status on page 15 for information on viewing the printer status in the Control Panel.
To charge the battery
When disconnected from the printer, the battery should be stored in a cool, dry place.
To disconnect the battery


printer to fully disconnect the battery.


Leitz Icon Printer User Guide Caring for the Printer
The Leitz Icon printer requires very little maintenance. You may occasionally need to clean the label cartridge compartment, the exterior of the printer, and the paper path.
If you experience lighter than normal printing or labels are protruding from the label cartridge when the cartridge is removed from the printer, use the included cleaning card to clean the paper path.
To clean the label cartridge compartment
To clean the exterior of the printer
Wipe the exterior of the printer with a soft, damp cloth.
To use the cleaning card
(1.2”).
This section includes information about what to do if you encounter a problem with your printer. If you need further assistance, please visit the Support section of the Leitz website at www.leitz.com/icon/support
In addition to indicating the power and wireless connection status of the printer, the power and wireless status lights can also indicate printer errors and other information.
Error/Status Power Status Light Wireless Status Light
Printer out of paper or Label loading failed
Flashing once per second As is; indicates wireless status
Cutter jam Both status lights flash simultaneously twice per second
Invalid or unreadable label cartridge Status lights flash alternately; each light flashes once per second
WPS connection in progress On (Solid) Flashing once per second
For information about the power and wireless connection status, see Status Lights on page 5.

Leitz Icon Printer User Guide Troubleshooting
The label guide latch also acts as a platen release.
To clear a label jam

If you think a partial label may be stuck in the printer, you can access the platen and cutter by removing the front panel of the printer. See the video at www.leitz.com/icon/support for instructions on removing the printer panel.
when working with or near the cutter blade.
You can reset the printer to the factory default settings. Resetting the printer reverts all settings to the factory default settings. Any settings, including wireless settings, that have been changed are lost.
To reset the printer
printer.

Leitz Icon Printer User Guide Troubleshooting
If your wireless network does not appear in the list of available networks when running the Wi-Fi Setup Wizard from the Leitz Icon Control Panel (see Connecting the Printer Using Your Wireless Network on page 8), check for the following:
If the initial wireless connection is made, but is then lost, check for the following:
If you are having trouble printing, check that the print button in the software is green.
If the print button is not green, the software is unable to communicate with the printer; check for the following:


Leitz Icon Printer User Guide Troubleshooting
If the print button is green but the label cartridge information is not displayed, check for the following:


If the label cartridge information displayed in the software indicates that the label cartridge is empty but you believe there are still labels remaining, check the following:
Visit the Leitz website at www.leitz.com/icon/support for information about contacting customer support.

Leitz Icon Printer User Guide Technical Information
The following table list the technical specifications of the Leitz Icon printer.
Power 24 V DC, 4 A
Printer type Direct thermal
Resolution 300 dots per inch (DPI)
Maximum paper width 91 mm (3.58 inches)
Interface Wi-Fi 2.4GHz, 802.11b/g
USB Full Speed USB 2.0 Printer Class Device
Maximum print speed 200 labels per minute (4-line standard address label using USB connection)
Duty Cycle Printer 2000 labels per hour
Cutter 1800 cuts per hour
Size Printer Height 112.25 mm (4.42 inches)
Width 128.85 mm (5.07 inches)
Depth 217.25 mm (8.55 inches)
Battery Height 111.25 mm (4.38 inches)
Width 128.85 mm (5.07 inches)
Depth 49.54 mm (1.95 inches)
Printer with Battery attached
Height 112.25 mm (4.42 inches)
Width 128.85 mm (5.07 inches)
Depth 257.75mm (10.15 inches)
Weight Printer 1.27 kg (2.8 lbs)
Battery 502 g (1.1 lbs)

Leitz Icon Printer User Guide Technical Information
Esselte offers a 2 year warranty for the Leitz Icon Smart Labeling System connected to the date of purchase.
*This warranty can be extended by one year upon registration at: www.leitz.com/icon
In case of problems or questions, please contact:
ESSELTE UK Ltd.
Waterside House, Cowley Business Park,
Uxbridge, Middlesex UB8 2HP
Tel.: 0845 678 1801
date of purchase.
carriage paid to ESSELTE, together with this warranty card and in adequate packaging. No liability will be accepted by ESSELTE for goods damaged during transportation as a result of unsuitable packaging.
defects**. The seller‘s statutory liability for material defects is not limited by this manufacturer‘s warranty.
**The customer‘s statutory right, applicable in the case of claims made solely against the seller in the event of a material defect and under certain other conditions, to claim remedial action, a price reduction, rescission of the purchase agreement and/or compensa- tion within 24 months of handover. Another important precondition is that the fault must have already existed when the Leitz device was handed over. The onus is on the customer to provide proof of such a fault after six months have elapsed.This liability for mate- rial defects does not entitle the customer to make a claim against the manufacturer.
Furthermore, the warranty is subject to the following conditions:
a.The warranty certificate must have been completed by the salesperson (sales date and company stamp).
b.The device must have been used strictly in accordance with the operating instructions since its purchase.
c.The identified damage must not have been caused by an accident, misuse, alteration or improper use.
d.Without prejudice to any claims arising from the Product Liability Act, ESSELTE does not accept liability for damage,
loss or expense of any kind, resulting from, caused by or linked to a fault in the device or its accessories.
This symbol of a crossed out waste bin on a product, its packaging and/or accompanying documents means that the product is subject to the European directive 2002/96/EC as well as national law for implemention of the directive. Directive and law prescribe that electrical and electronic products must not be disposed of with household waste.
The customer must dispose of the product by delivering it to a designated station for collection, treatment and recycling of waste electrical and electronic equipment. The correct disposal of your old appliance is free of charge and will help prevent potential negative consequences for the environment and human health.
For more information about disposing your old appliance, contact your city office, waste disposal service, or the shop where you purchased the product.
UK & Ireland

Leitz Icon Printer User Guide Technical Information
Firmware incorporated into this product includes third party copyrighted software, including FreeRTOS version 7.3.0 ("FreeRTOS Software"), which is licensed under a modified GNU General Public License version 2 with exception text (the “FreeRTOS License”) and not under Esselte’s End User License Agreement. Information about the FreeRTOS Software is available at www.freertos.org and a copy of the FreeRTOS License is available at www.freertos.org/license.txt Esselte incorporates the FreeRTOS Software in accordance with the special exemption under the License. In accordance with the license requirements, the FreeRTOS Software source code may be downloaded at no charge from the Leitz website at www.leitz.com (or obtained on CD for a nominal charge via request to the same www.leitz.com within three years of the date of purchase).
Third party copyrighted software also includes Tinysvcmdns, licensed under the 3-clause ("modified") BSD License and copyright (C) 2011 Darell Tan. The following statements pertain to Tinysvcmdns: "Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: (1) Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. (2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. (3)The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
Third party copyrighted software also includes CHCSVParser, Copyright (c) 2014 Dave DeLong. The following statements pertain to CHCSVParser: "Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE."
Third party copyrighted software also includes Libxls, Copyright 2004 Komarov Valery, Copyright 2006 Christophe Leitienne and Copyright 2008-2012 David Hoerl. The following statements pertain to Libxls: "Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY David Hoerl ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David Hoerl OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
Third party copyrighted software also includes DHlibxls, Copyright 2012 David Hoerl All Rights Reserved. The following statements pertain to DHlibxls: "Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY David Hoerl ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David Hoerl OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

Leitz Icon Printer User Guide Technical Information
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
Third party copyrighted software also includes Log4Net, software that was developed at The Apache Software Foundation (http://www.apache.org/) and is Copyright 2004-2013, The Apache Software Foundation. The software is licensed under the Apache License Version 2.0, which is available for review at http://logging.apache.org/log4net/license.html
Third party copyrighted software also includes KissXML, Copyright (c) 2012, Robbie Hanson.
Third party copyrighted software also includes Extended WPF Toolkit, Copyright © Xceed Software Inc. 2010-2012, licensed under the Microsoft Public License, which is available for review at http://wpftoolkit.codeplex.com/license
Third party copyrighted software also includes Excel Data Reader, Copyright (c) 2008 EXCELDATAREADER. The following statements pertain to Excel Data Reader. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Third party copyrighted software also includes Spring.NET Social, Copyright © 2004-2013 Rod Johnson, Juergen Hoeller, Keith Donald, Colin Sampaleanu, Rob Harrop, Alef Arendsen, Thomas Risberg, Darren Davison, Dmitriy Kopylenko, Mark Pollack, Thierry Templier, Erwin Vervaet, Portia Tung, Ben Hale, Adrian Colyer, John Lewis, Costin Leau, Mark Fisher, Sam Brannen, Ramnivas Laddad, Arjen Poutsma, Chris Beams, Tareq Abedrabbo and Andy Clement. Spring.NET is licensed under the Apache License Version 2.0, which is available for review at http://www.apache.org/licenses/LICENSE-2.0
Third party copyrighted software also includes ZXing.NET, Copyrigth ©, ZXing authors. The software is licensed under the Apache License Version 2.0, which is available for review at http://www.apache.org/licenses/LICENSE-2.0
Third party copyrighted software also includes SharpZipLib, Copyright (C) 2001 Mike Krueger. SharpZipLib is licensed under the GPL, the license for which can be found at http://icsharpcode.github.io/SharpZipLib
Third party copyrighted software also includes ZXingObjC, copyright © 2012, ZXing and ZXingObjC authors. The software is licensed under the Apache License Version 2.0, which is available for review at http://www.apache.org/licenses/ LICENSE-2.0.
Third party copyrighted software also includes JmDNS, copyright © 2002-2011, JmDNS. The software is licensed under the Apache License Version 2.0, which is available for review at http://jmdns.sourceforge.net/license.html
Third party copyrighted software also includes android-tao-rest-data-processor, copyright © 2014, Alexandr Tsvetkov. The software is licensed under the BSD 3-Clause License, which is available for review at https://github.com/lordtao/android- tao-rest-data-processor/blob/master/LICENSE.
Third party copyrighted software also includes android-tao-core, copyright © 2014, Alexandr Tsvetkov. The software is licensed under the BSD 3-Clause License, which is available for review at https://github.com/lordtao/android-tao-core/ blob/master/LICENSE.
With respect solely to the third party software, no warranty (either expressed or implied) is provided, to the extent permitted by applicable law. Copying, distribution, and modification of the third party software is solely at your own risk and is subject to the terms of its License. Esselte is not responsible for any such modification. Esselte reserves the right to not support any product in which you have or have attempted to modify software supplied by Esselte.

Leitz Icon Printer User Guide Technical Information
This device has been developed for printing labels and similar items using Leitz Icon Intelligent Label Cartridges. The printer should be used only for this purpose, as described in this user guide.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.