Instruction/ maintenance manual of the product IVMR 1042P Blaupunkt
Go to page of 16
.
1.
2 T ABLE OF CONTENTS Monitor overview . . . . . . . . . . . . . . 3 IR remote control overview . . . . . . . 5 Notes for the user . . . . . . . . . . . . 6 Precautionary measures . . . . . . . . . 6 Safety notices . . . . . . . . . . . . . 6 Supplied parts .
3 MONITOR OVERVIEW (IVMR-7002P Shown) 1 2 3 4 5 10 7 6 8 9 1 11 13 14 12 *Note: Buttons 6-9 are located on the right side of the display screen on Model IVMR-1042P .
Lights on the main unit Light switch ON Monitor latch V ehicle interior lighting switch Infrared receiver for IR remote control IVRC-06 Infrared transmitter for IR headphones IVHS-01 (accessory) Contr.
POWER On/off button for the monitor . TV/VIDEO Input selector: switch between A V1 and AUX. VOL arrow button / (Not used) MUTE CH arrow button / (Not used) MENU See Instructions / OSD menu Battery com.
6 NOTES FOR THE USER Thank you for choosing a Blaupunkt product. W e hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time.
7 SUPPLIED P AR TS The monitor is supplied with all the parts listed below . Please check that the range of parts supplied with your device is complete.
8 INST ALLING THE MONITOR Installing the monitor (mechanical) Select a suitable position for secure installation of the monitor: • The device must not distract the driver or restrict the driver’ s view . • The ability to enter and get out of the vehicle must not be impeded.
9 INST ALLING THE MONITOR Interior lighting connection (3 wires) Red wire = Constant +12V White wire = T o the door switch (Negative Door T rigger) Black wire = Ground W arning notice: The operating voltage cable must be protected with at least a 1.5 A fuse.
10 OPERA TION Controlling the interior lighting (monitor) There are two switches for the lights: ON and interior lighting O N : This button is used to switch the lights on/off. Interior lighting : If activated, the lights only come on when the vehicle’ s doors are opened.
11 OPERA TION Adjusting the position of the monitor Closing the monitor Pull the display screen towards you and up into its base, until it snaps securely into the locking/releasing mechanism. Powering on the monitor Press the power -on button on the main unit or the button on the remote control to switch the monitor on/off.
12 OPERA TION OSD menu Operation • Press the MENU button on the display or the MENU button on the remote control to open the OSD menu. • Use the arrow buttons / or to select the options. After you press the MENU button or you can use the arrow buttons to change the settings.
13 OPERA TION Changing the dome light • Detach the monitor from the ceiling plate (4 screws). • Remove the 3 screws of the metal cover (see picture below). • T ake out the old bulb. • Put in a new bulb (12 V olts, 3 W atts). • Reinstall the monitor .
14 SPECIFICA TIONS Model IVMR-7002P IVMR-1042P TF T -L C D Size 7 .0" (12.7 cm) 1 0.4" (26.4 cm) Aspect Ratio 1 6:9 4:3 Open to Close 0° to 1 8 0° 0° to 1 8 0° Dome Light Y es Y es Screen Size 7 .
Robert Bosch Corporation Sales Group - Blaupunkt Division 2800 S. 25th Avenue, Broadview , Illinois 60155 U.S.A. www .blaupunktusa.com Copyright 2004 by the Robert Bosch Corporation No portion of this.
An important point after buying a device Blaupunkt IVMR 1042P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blaupunkt IVMR 1042P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blaupunkt IVMR 1042P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blaupunkt IVMR 1042P you will learn all the available features of the product, as well as information on its operation. The information that you get Blaupunkt IVMR 1042P will certainly help you make a decision on the purchase.
If you already are a holder of Blaupunkt IVMR 1042P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blaupunkt IVMR 1042P.
However, one of the most important roles played by the user manual is to help in solving problems with Blaupunkt IVMR 1042P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blaupunkt IVMR 1042P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
