Instruction/ maintenance manual of the product FX802A Black Box
Go to page of 25
CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.
4 FCC ST A TEMENT FEDERAL COMMUNICA TIONS COMMISSION and INDUSTR Y CANADA RADIO FREQUENCY INTERFERENCE ST A TEMENT Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.
5 CAMPUS P AGER NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY ST A TEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
6 NOM ST A TEMENT 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato. 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
7 CAMPUS P AGER TRADEMARKS All applied-for and registered trademarks are the property of their respective owners..
8 CAMPUS P AGER CONTENTS 1. Specifications .................................................................................6 2. Important Notes.............................................................................7 3. Introduction ............
9 CAMPUS P AGER 1. Specifications Operating Voltage — 120 VAC, 60 Hz Transmitting Frequency — 27.255 MHz System Codes — 1000 combinations Transmitting Range — Up to 2 miles (3.
10 CAMPUS P AGER 2. Impor tant Notes We recommend that you use a surge protector with all electronic devices. Use a surge suppressor on the input power supply of the Campus Pager. W ARNING BEWARE OF ELECTRIC SHOCK!!! You might be shocked if you remove the cover or back of the Campus Pager.
11 CAMPUS P AGER 3. Introduction 3.1 Campus Pager The Campus Pager is a wireless, in-house paging system that alerts you to important messages through its individual system pagers. One model (FX800A) is available with included pagers (FX801A), and another model (FX810A) works with pagers that you order separately (FX801A, FX802A).
12 CAMPUS P AGER Figure 3-1. Campus Pager . You can use the Campus Pager in a variety of applications, in any environment in which you need unlimited/direct paging.
13 CAMPUS P AGER The Campus Pager can send ten different message codes (0-9) and address up to 100 individual (system) pagers. Attractive features of the Campus Pager system include: • Nonvolatile memory—stores system and pager codes for over one year, even if the power fails.
14 CAMPUS P AGER 3.3 Vibrating/T one Pager (FX802A) The Vibrating/Tone Pager works in a similar fashion, except that it does not beep 12 times every ten seconds.
15 CAMPUS P AGER 4. Installation 4.1 Positioning the Campus Pager You can operate the Campus Pager from a flat surface such as a table, counter, or shelf. Or, you can use the supplied wall-mount brackets to mount it on a wall. Steel and concrete walls reduce the Campus Pager’s transmitting range.
16 CAMPUS P AGER 2. Insert the center-loaded antenna connector into the antenna jack on the right side of the Campus Pager. Turn the connector clockwise until the antenna locks in place. For maximum efficiency, extend the antenna to its full length, orient it vertically, and keep it away from walls.
17 CAMPUS P AGER Figure 4-3. Connecting the Campus Pager to the mounted screws. You can use an outdoor base antenna in place of the supplied antenna to increase the Campus Pager’s transmitting range. The PL259-type antenna jack on the Campus Pager makes it easy to use with a variety of antennas.
18 CAMPUS P AGER 4.2 Positioning the Antenna Ground Wire For best transmission, fully extend the black antenna ground wire. Do not coil this wire, as this will diminish the transmission efficiency. 4.3 Connecting Power to the Campus Pager Plug the power cord into a standard AC outlet.
19 CAMPUS P AGER Figure 4-4. Installing batteries in the pager . The pager will notify you when the batteries are getting low, by displaying “b” on the pager’s LED when you press the pager’s ON/OFF switch. It will also notify you by beeping once every fifteen seconds.
20 CAMPUS P AGER 5. Using the Campus Pager This section contains operating notes for using the Campus Pager. Read these notes before attempting to operate the system. 5.1 Overview Before operating the Campus Pager, be sure that you understand the following information concerning the paging system’s capabilities.
21 CAMPUS P AGER 2. Turn the Campus Pager over and locate the system code button, which is inside the hole labeled SYSTEM CODE. Insert a pointed object such as a straightened paper clip and press the button (see Figure 5-5 ). The TRANSMIT display will show the previous system code for about one second, then shows ___.
22 CAMPUS P AGER 5.3 Storing the Pager Code Before you can use the Tone Pager or Vibrating/Tone Pager, you must designate a pager code for each of the pagers. NOTE You must reset all pager codes when you enter a new system code. To enter and save a pager code, follow these steps: 1.
23 CAMPUS P AGER 3. Make sure that the Campus Pager is turned ON, then enter a two-digit pager code (00-99) and then 0. 4. Press the TRANSMIT button on the Campus Pager, and the unit will transmit the pager code to the pager. The pager will beep four times, and flash “L” on its display four times.
24 CAMPUS P AGER NOTE You cannot reset either of these codes after you press the TRANSMIT button. 4. Press the TRANSMIT button. The TRANSMIT display lights during transmission, and the pager’s display flashes the message code number seven times.
25 CAMPUS P AGER 5.6 Receiving a Message Code with the T one Pager When a Tone Pager is turned ON and receives a page, it sounds 12 beeps and flashes the received message code on its display, unless you press the ON/OFF button to silence the pager before it finishes beeping.
26 CAMPUS P AGER 6. Ser vice Infor mation If you have problems with your Campus Pager, first call for technical support. If technical support personnel cannot solve the problem with your Pager, you might have to return the unit to the factory for service.
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 1996. Black Box Corporation. All rights reserved..
An important point after buying a device Black Box FX802A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box FX802A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box FX802A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box FX802A you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box FX802A will certainly help you make a decision on the purchase.
If you already are a holder of Black Box FX802A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box FX802A.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box FX802A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box FX802A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
