Instruction/ maintenance manual of the product VEC010BD Black & Decker
Go to page of 6
VEC010BD KEY FEA TURES: • Rechargeable Jump-Start System • Easy-to-Read Charge Indicators • Emergency Area Light • Keyless ON/OFF Power Switch • 12 V olt DC Accessory Outlet • Battery Stat.
iii CAUTIONS Use only the supplied cords/adapters for recharging this unit. Do not recharge for more than 3-4 hours maximum using 12 volt DC method. Recharge unit after each use. All on/off switches should be in the OFF position when the unit is charging or not in use.
iv 1 T ABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 USING THE UNIT AS A JUMP-ST ARTER This Jump-Starter is equipped with a safety Power Switch that only allows energy to flow when proper connections are made to batter y and frame. Once the connections are properly made, turn the switch ON to jump-start the vehicle.
5 CARE AND MAINTENANCE This product has a sealed lead acid batter y that should be kept fully charged. Recharge before first use, immediately after each use, and ever y 60 days if not used. Failure to do this may reduce the batter y life dramatically .
7 TROUBLESHOOTING Unit Fails to Jump-Start • Make sure unit’s power switch is in the ON position. • Check that Jump-Star ter has a full charge. • Make sure a proper polarity cable connection has been established (see “Using the Unit as a Jump-Starter ,” page 4).
An important point after buying a device Black & Decker VEC010BD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker VEC010BD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker VEC010BD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker VEC010BD you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker VEC010BD will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker VEC010BD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker VEC010BD.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker VEC010BD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker VEC010BD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
