Instruction/ maintenance manual of the product NST1024 Black & Decker
Go to page of 16
KEY INFORMA TION YOU SHOULD KNOW: • Battery ships from the factory without a full charge. For optimal performance and runtime charge battery for 9 hours before attempting to use your trimmer/edger . • T o operate the trimmer, the lock out button must be pressed in.
WARNING : Important Safety W arnings and Instructions TO REDUCE RISK OF INJUR Y : • Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and or serious injury . • Save these instructions and review frequently prior to use and in instructing others.
W ARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer , birth defects or other reproductive harm.
LEA VING THE BATTER Y P ACK IN THE CHARGER It is OK to leave battery packs on charge for long periods of time. The charger has a maintenance mode which gives the battery pack enough charge to stay “topped off”.
A TTACHING THE AUXILIAR Y HANDLE • With the hex wrench supplied, separate the handle pieces as shown in figure D . Note: Hex head wrench stores on trimmer handle above battery . • Attach the handle to the metal shaft of the trimmer with the curved edge facing forward.
10 LINE FEEDING Y our trimmer uses .065 in. (1.65mm) diameter nylon line to cut grass and weeds quickly and easily . In time, the tip of the nylon line will become worn and the auto feed mechanism will automatically feed and trim a fresh length of line.
12 has established programs in the United States and Canada to facilitate the collection of spent nickel-cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling.
14 15 VOICI DES RENSEIGNEMENTS IMPORT ANTS A CONNAITRE : • Le bloc-piles nʼest pas pleinement chargé à son expédition de lʼusine. Pour optimiser le rendement et la durée de fonctionnement, charger le bloc-piles durant 9 heures avant dʼutiliser le taille-bordure/coupe-bordure.
16 17 • S’HABILLER DE MANIÈRE APPROPRIÉE – Ne pas porter de vêtements amples ni de bijoux. Ils peuvent sʼenchevêtrer dans les pièces mobiles. Des gants en caoutchouc et des chaussures adéquates à semelles en caoutchouc sont recommandés lors de travaux à lʼextérieur .
19 6. Afin de minimiser les risques de dommages au cordon ou à la fiche, tirer sur la fiche et non le cordon pour débrancher celui-ci. 7. S'assurer que le cordon est placé qu'on ne puisse marcher dessus, y trébucher , ni y exercer toute autre contrainte ou dommage.
21 où la température ambiante se situe entre 4.5 °C (40 °F) et 40.5 °C (105 °F). (4) Si le problème persiste, il faut confier le bloc-pile et le chargeur au personnel du centre de service Black & Decker de la région. Consulter la rubrique «Outils électriques» des Pages Jaunes.
durant plus de 30 jours, débrancher le chargeur et ranger le bloc-piles dans un endroit frais et sec. REMARQUE : Le bloc-piles perdra sa charge une fois retiré du chargeur . Si le bloc-piles nʼa pas été maintenu chargé (charge dʼentretien), il peut être nécessaire de le recharger avant de lʼutiliser .
FONCTIONNEMENT DU T AILLE-BORDURE • Insérer le bloc-piles complètement chargé dans le taille-bordure. Un déclic se fait entendre lorsquʼil est bien en position comme montré à la figure h .
REMPLACEMENT DE LA BOBINE Pour optimiser le rendement, Black & Decker recommande de nʼutiliser que les bobines de rechange Black & Decker (AF-100), en vente dans de nombreuses quincailleries locales. Pour tout renseignement concernant les accessoires, composer le : 1-800-544-6986.
28 Le recyclage des piles rechar geables et le sceau SRPRC MC RBRC™ (Société de recyclage des piles rechargeables) Ce sceau apposé sur la pile au nickel-cadmium (ou sur le bloc-piles) indique que les coûts de recyclage de cette pile (ou de ce bloc-piles) à la fin de sa vie utile ont déjà été payés par Black & Decker .
48 BLACK & DECKER S.A. DE C.V . BOSQUES DE CIDROS ACCESO RADIA TAS NO. 42 COL. BOSQUES DE LAS LOMAS. 05120 MEXICO, D.F TEL. (01 55) 5326 7100 01 800 847 2309/01 800 847 2312 SECCI N AMARILLA Si funciona… y funciona muy bien.
An important point after buying a device Black & Decker NST1024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker NST1024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker NST1024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker NST1024 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker NST1024 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker NST1024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker NST1024.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker NST1024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker NST1024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
