Instruction/ maintenance manual of the product 52067 - 5HP Troy-Bilt
Go to page of 24
Model 52067 - 5HP OWNER’S MANUAL T rimmer/Mower • Safety • Assembly • Features and Controls • Operation • Maintenance • Parts List GARDEN WAY INCORPORATED SAFETY FIRST! Before operating this equipment, read this Owner's Manual and the separate manual supplied by the engine manufacturer .
SECTION 1: SAFETY ...........................................1 General Operation ......................................................1 Slope Operation .........................................................2 Children...............................
Safety 1 Section 1 Figure 1-1 Trimmer Head Control Bail SP ARK ARRESTER W ARNING TO RESIDENTS OF CALIFORNIA AND SEVERAL OTHER ST A TES Under California law, and under the laws of several other states,.
2 Section 1: Safety 16. Do not operate the machine while under the influence of alcohol or drugs, or when tired or ill. 17. If using machine in wet conditions, exercise extreme care to prevent loss of footing. Wear footwear that will improve traction.
Section 1: Safety 3 e) Replace caps on the fuel tank and fuel container and clean up spilled fuel before starting engine. Move machine away from any gasoline fumes before starting the engine. f) Keep matches, smoking materials, open flames, and sparks away from the fuel tank and fuel container.
Assembly 2 Section 4 INTRODUCTION Carefully follow these assembly steps to correctly prepare your machine for use. It is recommended that you read this Section in its entirety before beginning assembly. INSPECTION AFTER DELIVERY Inspect your machine immediately after it has been delivered.
Figure 2-4: Check trimmer head hardware for tightness. Figure 2-1 Section 2: Assembly 5 A Figure 2-2: Handlebar installation. B A C D F F E B G Figure 2-3: Attach throttle lever to right-side handlebar.
FEA TURES AND CONTROLS This Section describes the location and function of the features and controls on your machine. Refer to the “ Operation ” Section for detailed operating instructions. IMPORTANT: Refer to the separate en- gine manual for detailed information about the controls on the engine.
INTRODUCTION Read this Section thoroughly before you start the engine. As with any piece of outdoor power equipment, getting the “ feel ” for how your machine operates and knowing the best techniques for particu- lar jobs are important to overall good performance.
8 Section 4: Operation USE CORRECT DIAMETER TRIMMER LINE For tougher cutting conditions, use two (or four) sections of the thicker, .155" di- ameter extra-heavy duty line. For less demanding conditions, use two sections of the thinner, .130" diameter heavy-duty line.
Section 4: Operation 9 When mowing, let the cutting head rest lightly on the ground and do not lift up or push down on the handlebars. This tech- nique allows the cutting head to follow the ground contour closely, resulting in the most even cut possible.
Maintenance 5 Section 10 REQUIRED MAINTENANCE SCHEDULE BEFORE EVERY EVERY EVERY AS REQUIRED MAINTENANCE EA C H 5 25 10 0 NOTED US E HOURS HOURS HOURS Check engine oil level •• Check trimmer lines .
Section 5: Maintenance 11 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
12 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
Section 5: Maintenance 13 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
14 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
Section 5: Maintenance 15 Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
16 Section 5: Maintenance Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.
Parts List 17 Model 52067 DRA WING NO. 1 1 2 3 4 5 5 5 5 5 5 7 8 9 10 11 12 13 17 17 17 16 15 18 19 14 14 6 6 1 1917765 Debris Guard ............................................ 1 2 1918116 Decal-Logo ............................................... 1 3 1915290 Push-in Fastener .
18 Parts List Model 52067 DRA WING NO. 2 See DRAWING NO. 1 See DRAWING NO. 3 See ACCESSORIES AND KITS 2 2 1 1 3 3 4 5 5 7 8 9 10 11 12 13 14 15 16 27 17 18 18 22 23 24 25 26 18 19 20 21 6.
Parts List 19 Model 52067 1 1917592 Wheel/Tire Assembly .............................. 2 2 1917593 Locking Retaining Ring .......................... 2 3 1917775 Flat Washer ............................................ 2 4 1917258 Axle ................
20 Parts List Model 52067 DRA WING NO. 3 1 4 5 2 3 6 6 8 7 9 12 13 13 13 14 15 16 14 10 11 1 1918283 Upper Handlebar (Incl. Refs. 2 & 3) ....... 1 2 1915889 Decal – Bail Engage/Disengage ................ 1 3 1918304 Decal – Throttle ..........
Parts List 21 Model 52067 Ref. # Part # Description Qty. ACCESSORIES AND KITS 1 1904476 Trimmer String Kit, .155" dia. line (includes 24 pieces) ................................ N/I 2 1904477 Trimmer String Kit, .130" dia. line (includes 24 pieces) .
1905694 (6/01) Printed in U.S.A. © 2001 Garden Way Incorporated CUSTOMER SERVICE INFORMA TION Owner Registration Card Please fill out and mail the enclosed owner registration card. The purpose of this card is to register each unit at the factory so that we can provide you with warranty benefits and in- formational bulletins.
An important point after buying a device Troy-Bilt 52067 - 5HP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Troy-Bilt 52067 - 5HP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Troy-Bilt 52067 - 5HP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Troy-Bilt 52067 - 5HP you will learn all the available features of the product, as well as information on its operation. The information that you get Troy-Bilt 52067 - 5HP will certainly help you make a decision on the purchase.
If you already are a holder of Troy-Bilt 52067 - 5HP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Troy-Bilt 52067 - 5HP.
However, one of the most important roles played by the user manual is to help in solving problems with Troy-Bilt 52067 - 5HP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Troy-Bilt 52067 - 5HP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center