Instruction/ maintenance manual of the product GL530 Black & Decker
Go to page of 8
2 Grass T rimmer Congratulations! Y our purchase of this Black & Decker Reflex ® grass trimmer and lawn edger assur es you of years of problem fr ee trimming. The Reflex ® not only trims grass and edges the lawn (GL540), it also has a unique totally automatic line feed system.
3 ENGLISH Cutting line • T ake care against injury fr om line trimming blade (8) during unpacking and assembly and any excess line which may be cut off when the trimmer is first operated. • The cutting line (9) will continue to run for a shor t time after r eleasing the trigger switch.
4 Fit a BS1363A approved plug Connect blue to N (neutral) Make sure that the outer sheath of the cable is held firmly by the clamp Fit the recommended fuse Connect brown to L (live) 240 volts AC only. Never use a light socket Never use a light socket • Only fit 13 amp BS1363A approved plugs fitted with the corr ectly rated fuse.
5 A Do not use your trimmer without its guar d. B Do not cut wet grass; best r esults are achieved when the grass is dry . T rimming • T o switch on your trimmer , squeeze the trigger switch (3). • T o switch the unit of f, release the trigger switch.
6 How to wind new line onto an empty spool (Fig. 6 & 7) 6 • A maximum of 10 metr es of new cutting line can be wound onto the empty spool. The spool has an ‘Indicator’ to help you avoid winding an excessive quantity of cutting line on the spool, as too much will pr event the automatic feed system from functioning .
7 ENGLISH Australia/New Zealand: See Black & Decker under ‘T ools electric’ in your yellow pages. Unwanted pr oducts and the environment Should you find one day that your product needs r eplacement, or is of no further use to you, think of the protection of the envir onment.
8 R Australia Black & Decker (A ’asia) Pty Ltd T el: 03 213 8200 286-288 Maroondah Highway Fax: 03 726 7150 North Croydon, Victoria 3136 Belgique/België Black & Decker Belgium NV T el: 02 7.
9 R English.
An important point after buying a device Black & Decker GL530 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker GL530 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker GL530 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker GL530 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker GL530 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker GL530, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker GL530.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker GL530. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker GL530 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
