Instruction/ maintenance manual of the product CHT400 Black & Decker
Go to page of 4
OPERA TING INSTRUCTIONS Charging the Power Pack THE BA TTERIES IN YOUR POWER P ACK ARE NOT FULL Y CHARGED A T THE F ACTORY . BEFORE A TTEMPTING TO CHARGE THEM, THOROUGHL Y READ ALL OF THE SAFETY INSTRUCTIONS. 1. Remove the power pack from the tool by squeezing it as shown in Figure 1.
W arning: TO GUARD AGAINST INJURY , OBSERVE THE FOLLOWING: • READ INSTRUCTION MANUAL BEFORE USING. • SA VE INSTRUCTION MANUAL. • KEEP HANDS A W A Y FROM BLADES. • KEEP HANDS ON HANDLES. DON’T OVERREACH. • CAUTION – BLADE MA Y COAST AFTER TURN OFF .
8. Ne pas charger l’ensemble de piles sous la pluie ni dans des conditions mouillées. 9. Utiliser seulement l’ensemble de piles et le chargeur fournis avec le taille-haie ou des pièces de rechange identiques. 10. Ne pas jeter les piles au feu; la chaleur des flammes peut faire exploser les cellules des piles.
montaje, rupturas en las piezas, sus montajes y cualesquiera otras condiciones que pudiesen afectar su operación. Una guarda u otra parte dañada deberá repararse apropiadamente o reemplazarse por un centro de ser vicio autorizado a menos que se indique algo diferente en este manual.
An important point after buying a device Black & Decker CHT400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker CHT400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker CHT400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker CHT400 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker CHT400 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker CHT400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker CHT400.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker CHT400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker CHT400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
