Instruction/ maintenance manual of the product CG100 Black & Decker
Go to page of 5
connection from one terminal to another . Shorting the battery terminals together may cause sparks, burns, or a fire. • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edge are less likely to bind and are easier to control.
OPERA TING INSTRUCTIONS Note: Before beginning a caulk or adhesive application, practice on a piece of scrap. • Move switch to high speed position as shown in figure F . • Pull trigger (1) to begin dispensing caulk or adhesive. Fully engage the trigger to the housing handle.
• Lorsque la pile ne sert pas, l’éloigner de tout objet métallique (comme des trombones, des pièces de monnaie, des clés, des clous, des vis ou tout autr e petit objets métalliques qui peut créer une connexion d’une borne à l’autre).
• Guarde las herramientas fuera del alcance de los niños y de otras personas no capacitadas. Las herramientas son peligrosas en manos de personas no capacitadas.
INST ALACIÓN DEL TUBO DE ADHESIVO O MASILLA • Asegúrese de que el interruptor de encendido/apagado (5) esté en la posición de apagado moviendo el interruptor a la posición “O”.
An important point after buying a device Black & Decker CG100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker CG100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker CG100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker CG100 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker CG100 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker CG100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker CG100.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker CG100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker CG100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
