Instruction/ maintenance manual of the product 90518422 Black & Decker
Go to page of 8
V -2 MILLION PO WER SERIES ™ SPO TLIGHT INSTR UCTION MANU AL Thank you for choosing Black & Decker! Go to www .BlackandDecker .com/NewOwner to register your new product BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE Y OU CALL, HA VE THE CA T ALOG No , AND D A TE CODE A V AILABLE.
1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . • AVOID DANGEROUS ENVIRONMENTS Don’t use appliances in damp or wet locations.
2 • EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
3 • Do not immerse spotlight in water . • Do not drop or throw spotlight. It contains glass and a sealed lead acid battery . • Only replace bulb with type indicated in specifications (6 volt, H3 55 watt quartz halogen). • Use only with AC or DC charging adapters that are provided with unit.
4 CHARGING/RECHARGING THE SPO TLIGHT This unit is shipped in a partially charged state. Charge unit BEFORE first use using the 120 Volt AC Charger for 20-30 hours or until the green Battery Status LED flashes. Charge after each use until green LED flashes.
Using the Built-In Carry Lanyard The Carry Lanyard may be used to store or carr y the Spotlight. Adjust the slide on the cords to keep the Lanyard secure around the supporting object. CARE AND MAINTENANCE All batteries lose charge with time, especially when they are warm.
6 12. Connect the bulb power wire to the red power wire. 13. Tighten the retaining screw on the flange. 14. Place the reflector in position in the body of the spotlight. 15. Replace the rubber “O” ring in the groove around the perimeter of the reflector .
7 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center . If you need assistance regarding accessories, please call: 1-800-544-6986. WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
An important point after buying a device Black & Decker 90518422 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker 90518422 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker 90518422 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker 90518422 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker 90518422 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker 90518422, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker 90518422.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker 90518422. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker 90518422 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
