EN
ARGO logo
Official user manual

Argo Hydro Digit

15 pages·1.4 MB·Humidifier-Dehumidifier·PDF·ENDEFRITNLJA
Argo Hydro Digit
Table of Contents 20 sections ULTRASONIC HUMIDIFIER · EN · OPERATING INSTRUCTIONS · without supervision. This product is not a toy. Children should be adequately · … ShowHide
Page 1 of the Argo Hydro Digit user manual — OPERATING INSTRUCTIONS
Page 1 · click to enlarge
Page 1
Argo Hydro Digit — ULTRASONIC HUMIDIFIER diagram (page 1)
Fig. 1
Argo Hydro Digit — ULTRASONIC HUMIDIFIER diagram (page 1)
Fig. 2

ULTRASONIC HUMIDIFIER

EN

Argo Hydro Digit — EN diagram (page 1)
Fig. 3
Argo Hydro Digit — EN diagram (page 1)
Fig. 4
Argo Hydro Digit — EN diagram (page 1)
Fig. 5
Argo Hydro Digit — EN diagram (page 1)
Fig. 6
Argo Hydro Digit — EN diagram (page 1)
Fig. 7
Argo Hydro Digit — EN diagram (page 1)
Fig. 8
Argo Hydro Digit — EN diagram (page 1)
Fig. 9
Argo Hydro Digit — EN diagram (page 1)
Fig. 10
Argo Hydro Digit — EN diagram (page 1)
Fig. 11
Argo Hydro Digit — EN diagram (page 1)
Fig. 12
Argo Hydro Digit — EN diagram (page 1)
Fig. 13
Argo Hydro Digit — EN diagram (page 1)
Fig. 14
Argo Hydro Digit — EN diagram (page 1)
Fig. 15
Argo Hydro Digit — EN diagram (page 1)
Fig. 16
Argo Hydro Digit — EN diagram (page 1)
Fig. 17
Argo Hydro Digit — EN diagram (page 1)
Fig. 18
Argo Hydro Digit — EN diagram (page 1)
Fig. 19
Argo Hydro Digit — EN diagram (page 1)
Fig. 20

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages. Store these instructions.

Page 2 of the Argo Hydro Digit user manual — without supervision. This product is not a toy. Children should be adequately
Page 2 · click to enlarge
Page 2

GENERAL OPERATING AND SAFETY INSTRUCTIONS The appliance is a highly effective humidifier: use this humidifier

only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or malfunctions. Ensure that the mains voltage complies with that indicated on the

data plate (220-240VAC/50Hz). This appliance can be used by children aged from 8 years and

above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children

without supervision. This product is not a toy. Children should be adequately

supervised to ensure that they do not play with the appliance. This appliance is not suitable for use by persons (including

children) with reduced physical, sensory or mental abilities, or without the necessary experience and knowledge, unless they have been adequately supervised and instructed concerning use of the appliance by a person responsible for their safety. Disconnect the mains power when the appliance is not used

or for cleaning operations. Keeping the plug inserted may cause electric shocks or accidents. To disconnect the appliance, push the switch to OFF and remove

the plug from the socket. Pull on the plug only. Do not pull on the cord when turning off the appliance. Do not insert any objects or needles in the mist discharge nozzle

or in the compartment next to the handle. This may cause electric shock, malfunctions or other accidents. Do not bend, drag and twist the cord or apply force to remove it.

Do not use the appliance if the cord or plug are damaged: this may cause the risk of fire or electric shock. If the power supply

Page 3 of the Argo Hydro Digit user manual — without supervision. This product is not a toy. Children should be adequately
Page 3 · click to enlarge
Page 3

cord is damaged, it must be replaced by the service centre, so as to avoid any safety risks. Do not use the appliance in the presence of other electric

equipment such as computers or precision instruments. The humidity or “white dust” contained in the mist may cause the appliances to malfunction. In the event of an anomaly, switch the appliance off and remove

the plug immediately. Do not dismantle, repair or modify this product freely. In the event of malfunctions, contact the technical assistance centre directly. Do not immerse the cord, plug or any other element of the

appliance in water or other liquids. Do not touch the plug with wet hands. Do not inhale the mist discharged from the nozzle. Do not use acidic or basic solvents for cleaning the interior of the

appliance: the residues may hamper its efficient operation. Do not operate the appliance on unstable surfaces, as the water

flowing out of the appliance may wet the floor or cause malfunctions. Do not place the appliance on a high or sloping surface, as it may fall as a result of vibrations or accidental knocks. Placing the appliance on a sloping surface may cause the humidifier’s water level control device to malfunction, thereby causing an interruption in operation or loss of water. Do not expose the humidifier to direct sunlight or place it above or

adjacent to an air conditioner: this may cause warping, loss of heat or anomalies during operation. Do not place the appliance on furniture or supports with poor heat

resistance: this may cause warping or fading of the support due to overheating. Do not place the appliance in environments characterised by

strong magnetic fields: this may cause anomalies during operation.

Page 4 of the Argo Hydro Digit user manual — Do not place the appliance on blankets or carpets as these may
Page 4 · click to enlarge
Page 4

Do not place the appliance on blankets or carpets as these may

block the entry of air underneath the appliance and cause faults or malfunctions. Do not place the appliance on or close to furniture or curtains. The

mist may wet the furniture or curtains causing them to fade or deform. Moreover, the “white dust” included in the mist may alter the surfaces of furniture: therefore, the mist jet should not be directed towards furniture. Do not operate the appliance in close proximity to bathtubs,

showers, washbasins or pools. Fill the water tank with clean water on a daily basis. Remove any

residual water in the tank after every use. Clean the water tank and nebuliser every one or two weeks and keep them clean. Do not add any aromatic fragrances to the water in the tank. Do not connect the appliance to the mains supply if the water tank

is empty or if the appliance is upside-down: this will cause the nebuliser to malfunction. Do not move the appliance during operation as water leakages or

malfunctions may result. During winter, the water in the tank may freeze and cause the

appliance to malfunction. Remove the water from the tank. Carry out maintenance on the appliance by regularly and

thoroughly cleaning the tank and nebuliser. Continuous operation of the appliance with dirt residues may lead to faults and malfunctions. The internal ultrasonic nebuliser is highly sensitive. Do not touch it

with fingers or rub it with metal accessories to avoid reducing mist emission. Do not use hot water to avoid damaging the parts that generate

mist.

Page 5 of the Argo Hydro Digit user manual — DIGITAL DISPLAY
Page 5 · click to enlarge
Page 5

DESCRIPTION OF THE APPLIANCE

DIGITAL DISPLAY

Argo Hydro Digit — DIGITAL DISPLAY diagram (page 5)
Fig. 21
1. AUTO mode 2) QUIET mode 3) Timer 1-8 hours 4) Continuous operation 5) Mist emission level (low, medium, high) 6) Humidity (%) detected by the sensor 7) Lack of water warning light

The mist discharge nozzle can rotate through 360°: the direction of the mist may be freely adjusted.

Argo Hydro Digit — DIGITAL DISPLAY diagram (page 5)
Fig. 22
Page 6 of the Argo Hydro Digit user manual — INTERIOR
Page 6 · click to enlarge
Page 6

DESCRIPTION OF THE APPLIANCE

CONTROLS

Argo Hydro Digit — CONTROLS diagram (page 6)
Fig. 23

Water vapour level adjustment

Argo Hydro Digit — CONTROLS diagram (page 6)
Fig. 24

INTERIOR

Argo Hydro Digit — INTERIOR diagram (page 6)
Fig. 25
1. Tank handle 2) Water tank 3) Plug 4) Air inlet on bottom 5) Temperature and humidity sensor 6) Ion exchange filter 7) Controls 8) Display 9) Nozzle insertion position 10) Nozzle 11) Discharge nozzle
1. Air discharge 2) Water intake 3) Brush 4) Water inlet valve insertion 5) Water tank 6) Buoy 7) Nebuliser
Show 8 more labels / short text on this page
Humidity level · adjustment · ON/OFF button · Timer adjustment · Timer adjustment · Mode selection · NIGHT mode · Humidity level adjustment
Page 7 of the Argo Hydro Digit user manual — OPERATING INSTRUCTIONS FILLING THE WATER TANK
Page 7 · click to enlarge
Page 7

OPERATING INSTRUCTIONS FILLING THE WATER TANK

1. Firstly, remove the mist discharge nozzle from the water tank, by simply turning the appliance upside-down.
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 7)
Fig. 26
2. Remove the water tank from the appliance, by simply pulling the handle upwards. Remove the plug on the bottom of the tank by unscrewing it anticlockwise.
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 7)
Fig. 27
3. Fill the water tank exclusively with tap water, without adding any aromatic fragrances or essences.
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 7)
Fig. 28

Do not fill the tank with liquids other than tap water. Liquids with different

composition may damage the humidifier’s internal components and cause malfunctions. Do not add essences, perfumes, detergents, chemical agents, hot water

(above 40°C) etc. to the water in the tank as these may damage the humidifier’s water tank or several internal components and cause malfunctions. Do not add water directly inside the bottom section of the appliance beneath

the tank, or in the discharge nozzle. The water that may penetrate inside the bottom section of the appliance may cause malfunctions. Do not knock or throw the water tank as it may break or cause water

leakages. Do not use the water tank if it has suffered heavy knocks. Contact the technical assistance service as soon as possible. Fill the humidifier with clean water daily and keep it clean.

4. Close the water tank plug correctly. Ensure that the rubber ring has been placed on the tank plug then tightly secure the latter by turning it anti-clockwise, to prevent air from entering the tank and causing possible malfunctions.
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 7)
Fig. 29
5. Replace the water tank and mist discharge nozzle. Properly replace the water tank and mist discharge nozzle inside the tank before starting the appliance, or the discharged mist will wet the humidifier and surrounding environment. Do not move the humidifier after putting the tank back in place, as this may cause water leakages and possible malfunctions.
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 7)
Fig. 30
Page 8 of the Argo Hydro Digit user manual — OPERATING INSTRUCTIONS FILLING THE WATER TANK
Page 8 · click to enlarge
Page 8

OPERATING INSTRUCTIONS HOW TO ACTIVATE THE HUMIDIFIER 1. Insert the power supply plug in the socket: the humidifier will emit a buzzer sound.

Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 8)
Fig. 31
2. Press the “ON/OFF” button.

Press the “ON/OFF” button: the appliance emits a buzzer sound and activates. The display visualises “AUTO” and mist starts coming out of the discharge

Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 8)
Fig. 32

nozzle. The display visualises the level of humidity detected in the environment, and the

vaporisation mode activates automatically. Ten seconds after pressing the ON/OFF button, the indicator light signalling the

amount of mist turns on/off continuously (preparatory stage prior to activation). In the initial stages of operation, the amount of mist emitted may be unstable:

this is due to the difference in temperature and quality of the water. The humidifier requires some time before the nebuliser transforms water into mist and stabilises the flow.

The mist flow stabilises after 10-25 minutes of operation.

Page 9 of the Argo Hydro Digit user manual — OPERATING INSTRUCTIONS FILLING THE WATER TANK
Page 9 · click to enlarge
Page 9
Ambient temperatur eMost appropriate humidity level <19°C65% 20~21°C60% 22~24°C55% >25°C50%

Mist level adjustment in the AUTO mode

Difference between the appropriate humidity level and the current humidity level (%).Mist emission level (operation display) >16High level >4<15Medium level <3Low level The current humidity is higher than the appropriate humidity.Mist emission stops
Argo Hydro Digit — OPERATING INSTRUCTIONS FILLING THE WATER TANK diagram (page 9)
Fig. 33

The indication “Zzz” on the display signals

that the “QUIET” mode has been set. The ideal level of humidity in this mode is

50%. When the water in the tank is used up, the buzzer does not sound in this mode: the signal "WATER" simply lights up and the appliance stops.

Mist level adjustment in the QUIET mode.

Difference between the appropriate humidity level and the current humidity level (%).Mist emission level (operation display) >16High level >4<15Medium level <3Low level The current humidity is higher than the appropriate humidity.Mist emission stops
Page 10 of the Argo Hydro Digit user manual — TIMER ADJUSTMENT
Page 10 · click to enlarge
Page 10

OPERATING INSTRUCTIONS CUSTOM SETTING MODE Press the “ON/OFF” button to start the appliance. Press the “Set up” button repeatedly to set the desired operating mode.

Once the desired mode has been set, the mist emission level can be freely adjusted (to high, medium or low), the % of humidity and the timer.

MIST EMISSION ADJUSTMENT By pressing the "MIST CAPACITY" button each time, the amount of mist emitted can be adjusted (low=L; medium=M; high=H). The display will indicate the set level.

Argo Hydro Digit — SELECTING THE MOST APPROPRIATE HUMIDITY LEVEL diagram (page 10)
Fig. 34

The discharge nozzle does not emit any mist if the ambient humidity is higher than the pre-set humidity level.

SELECTING THE MOST APPROPRIATE HUMIDITY LEVEL

The most appropriate humidity level can be selected by pressing the upper and lower buttons of the humidity adjustment switch. The setting range varies from 40% to 80%, in 5% intervals.

Argo Hydro Digit — SELECTING THE MOST APPROPRIATE HUMIDITY LEVEL diagram (page 10)
Fig. 35

TIMER ADJUSTMENT

The operating time can be adjusted by pressing the left and right buttons on the timer. The setting range varies from “continuous operation” to 8-hour operation, with 1 hour intervals between the steps.

Argo Hydro Digit — TIMER ADJUSTMENT diagram (page 10)
Fig. 36
Page 11 of the Argo Hydro Digit user manual — MIST EMISSION WITH A FULL TANK
Page 11 · click to enlarge
Page 11

OPERATING INSTRUCTIONS HOW TO TURN OFF THE HUMIDIFIER

2. Remove the plug from the socket.
1. Press the ON/OFF button, the indicator lights on the display start fading. Press the ON/OFF button again, a buzzer sounds and the humidifier turns off.
Argo Hydro Digit — OPERATING INSTRUCTIONS HOW TO TURN OFF THE HUMIDIFIER diagram (page 11)
Fig. 37

MIST EMISSION WITH A FULL TANK

WITH THE WATER TANK FULL When the humidifier operates in: - “Low” mode: it may humidify continuously for roughly 60 hours. - “Medium” mode: it may humidify continuously for roughly 30 hours. - “High” mode: it may humidify continuously for roughly 20 hours.

WARNING!! It is normal for water to accumulate on the bottom of the appliance, as water in the tank passes through to the appliance’s base in order to initiate the ultrasonic humidification process. Be careful when removing the water tank for filling/emptying or cleaning operations, as the water accumulated on the bottom may drip from the tank. WHEN THE WATER IN THE TANK IS USED UP

When the water in the tank is used up, the humidifier stops functioning; the lack of water is signalled by a

buzzer sound while the WATER indicator light starts flashing.

To restore appliance operation, add water by following the aforementioned procedure.

Be careful when lifting the water tank as it may leak; dry the tank with a cloth to avoid wetting the floor or

furniture. When adding water to the tank, be careful not to drop or knock the latter as it may break.

water tank and nebuliser. It is advisable to clean the water tank and nebuliser once or twice a week and to operate the appliance when it is clean; limescale deposits may cause the appliance to malfunction.

In order to ensure constantly efficient operation, the water in the tank should be changed

everyday.

Page 12 of the Argo Hydro Digit user manual — PARTS TO BE REPLACED ION EXCHANGE FILTER
Page 12 · click to enlarge
Page 12

PARTS TO BE REPLACED ION EXCHANGE FILTER

A removable ion exchange filter is housed inside the humidifier: its function is to remove the calcium and

magnesium salts normally contained in water, as these may turn into “white dust” if they vaporise and deposit on furniture, objects and floors. For this reason, it is important to replace this filter regularly. The ion exchange filter may cause the water to assume a tea-like colour in the initial stages of operation.

This effect does not impact the appliance’s safety or performance, although the coloured water should be replaced with clean water.

REPLACING THE FILTER The ion exchange filter is able to effectively

Argo Hydro Digit — PARTS TO BE REPLACED ION EXCHANGE FILTER diagram (page 12)
Fig. 38

filter water up to approximately 400 litres. Using the device beyond this limit will lower its ability to remove substances that harden the water (calcium and magnesium). Consequently, this may generate increased levels of “white dust”.

In standard conditions, the filter must be

replaced after approximately 180 days of use in the auto mode. Depending on the frequency of use and quality

of the water, the filter may require replacement even sooner than the above-mentioned limit. Therefore, it is important to monitor the build-up of limescale deposits. The ion exchange filter is installed on the

bottom of the water tank. To replace the filter, both the cover and filter must be removed by rotating them anti-clockwise. Install the new filter by rotating it clockwise, as shown in the picture, and put the cover back in place by rotating it clockwise.

1. Ion exchange filter. 2. Water tank plug.
Page 13 of the Argo Hydro Digit user manual — 2. Buoy CLEANING THE NEBULISER
Page 13 · click to enlarge
Page 13

CLEANING AND MAINTENANCE

PRECAUTIONS

malfunctions may occur. MAINTENANCE OF THE HUMIDIFIER’S EXTERIOR SURFACE Use a damp and soft cloth to clean the humidifier’s exterior surface.

or alter the casing colour. CLEANING THE WATER TANK

Argo Hydro Digit — or alter the casing colour. CLEANING THE WATER TANK diagram (page 13)
Fig. 39 · or alter the casing colour. CLEANING THE WATER TANK

Remove dirt from the water tank with the aid of a soft, damp cloth. Use the brush supplied with the humidifier to remove deposits from the

smallest components then clean with a damp cloth. Clean the appliance once or twice a week.

1. Water tank CLEANING THE BUOY

Argo Hydro Digit — 1. Water tank CLEANING THE BUOY diagram (page 13)
Fig. 40 · 1. Water tank CLEANING THE BUOY

Ensure that no dust is deposited around the buoy and clean the latter

using the brush supplied with the humidifier: remove any deposits from the smallest components then wipe with a damp cloth. Clean the humidifier once or twice a week.

2. Buoy CLEANING THE NEBULISER

Argo Hydro Digit — 2. Buoy CLEANING THE NEBULISER diagram (page 13)
Fig. 41 · 2. Buoy CLEANING THE NEBULISER

Clean the deposits on the nebuliser using the brush supplied with the

humidifier then wipe with a damp cloth. Clean the humidifier once or twice a week.

powder to clean the nebuliser surface. These products may deform the nebuliser or cause abrasions, thereby leading to reduced mist emission and other malfunctions.

3. Nebuliser
Page 14 of the Argo Hydro Digit user manual — CLEANING AND MAINTENANCE
Page 14 · click to enlarge
Page 14

CLEANING AND MAINTENANCE MAINTENANCE OF THE WATER TANK AND DISCHARGE NOZZLE 1. Remove the discharge nozzle and unscrew the plug on the bottom of the tank by turning it anti-clockwise to eliminate the residual water. The discharge nozzle will fall if it is not removed before eliminating the water. 2. Clean the water tank and relative plug using clean water. Clean the water tank plug carefully, without applying force, so as to avoid water leakages from the plug itself. 3. After having removed the deposits from the surface of the discharge nozzle, dry the latter with the aid of a soft cloth.

assistance service directly. STORAGE AFTER USE

1. Ensure that no residual water is left in the tank and inside the appliance. 2. Leave the tank and appliance to dry naturally and completely before storing the product. 3. Place the water tank and appliance in a plastic bag then in the original box and store in a cool, dry place.

humidifier is completely dry before storing it away.

INFORMATION ON PROPER DISPOSAL OF THE APPLIANCE IN COMPLIANCE WITH EUROPEAN DIRECTIVE 2012/19/EU When this appliance reaches the end of its useful life, it must not be disposed of together with household waste but must be delivered to appropriate separate waste disposal plants or to dealers that provide similar service. Separate waste disposal of electrical and electronic appliances prevents possible negative effects on the environment and human health resulting from inadequate disposal, and also allows for recovering and recycling the materials comprising the appliances to ensure significant saving in terms of energy and resources. The separate disposal obligation is underlined by the crossed-out dustbin symbol appearing on the product. Illegal disposal of the product by the user shall determine the application of the administrative sanctions defined by the regulations in force.

Page 15 of the Argo Hydro Digit user manual — CLEANING AND MAINTENANCE
Page 15 · click to enlarge
Page 15

TROUBLESHOOTING In the event of malfunctions, check the following points before contacting the technical assistance centre. Should you not be able to solve the problem, please contact the technical assistance centre nearest to

you.

Problem Possible cause Suggested solution The plug is not properly inserted into the socket.

The appliance does not emit mist. The “WATER” indicator light on the display turns on/off (the water tank is empty).

Insert the plug properly into the socket.

Add water in the tank.

The appliance emits very little steam. There are some deposits on the nebuliser’s surface.

The appliance is operating in the “LOW” mode (the display visualises “LOW”).

It is not a fault. To increase the amount of mist, select the “HIGH” mode by pressing the “MIST CAPACITY” button.

Clean the nebuliser.

The difference between the ambient humidity and the humidity detected by the internal sensor is too high. The humidifier is positioned in a spot highly exposed to the outside environment, for example near a window.

The air intake slots are dusty.

Clean the air inlet slots. Humidity levels may vary in different points even of the same room.

Place the humidifier in a spot that is not exposed to the outside environment.

A strange smell is emitted with the mist. Deposits or dirt have built up inside the water tank or nebuliser.

The water in the tank is not fresh.

Clean the humidifier according to the instructions and replace the water in the tank with fresh water.

A "pu…..” sound is heard.

It is the sound of water flowing from the tank to the slot. A "po…..” sound is heard.

It is not a fault, continue using the appliance normally.

It is the noise of the fan.

www.argoclima.com

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Fix-it

Troubleshooting

Common problems, likely causes, and what to do.

ProblemPossible causeRemedy
The appliance does not emit mist.The plug is not properly inserted into the socket.Insert the plug properly into the socket. p.15
The appliance does not emit mist.The “WATER” indicator light on the display turns on/off (the water tank is empty).Add water in the tank. p.15
The appliance emits very little steam.The appliance is operating in the “LOW” mode (the display visualises “LOW”).It is not a fault. To increase the amount of mist, select the “HIGH” mode by pressing the “MIST CAPACITY” button. p.15
The appliance emits very little steam.There are some deposits on the nebuliser’s surface.Clean the nebuliser. p.15
The difference between the ambient humidity and the humidity detected by the internal sensor is too high.The air intake slots are dusty.Clean the air inlet slots. Humidity levels may vary in different points even of the same room. p.15
The difference between the ambient humidity and the humidity detected by the internal sensor is too high.The humidifier is positioned in a spot highly exposed to the outside environment, for example near a window.Place the humidifier in a spot that is not exposed to the outside environment. p.15
A strange smell is emitted with the mist.The water in the tank is not fresh.Clean the humidifier according to the instructions and replace the water in the tank with fresh water. p.15
A strange smell is emitted with the mist.Deposits or dirt have built up inside the water tank or nebuliser. p.15
A "pu…..” sound is heard.It is the sound of water flowing from the tank to the slot.It is not a fault, continue using the appliance normally. p.15
A "po…..” sound is heard.It is the noise of the fan. p.15

Ask about the Argo Hydro Digit

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Argo Hydro Digit

Be the first to ask — other owners or our team will answer.

Original document

Argo Hydro Digit manual PDF

15 pages·1.4 MB·Humidifier-Dehumidifier·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…