
For iOS 7 software

Chapter 1: iPod touch at a glance iPod touch overview 8 Accessories 9 Multi-touch display 9 Keys 11 Symbols in the status bar
12 Chapter 2: Introduction 12 Setting up the iPod touch 12 Connecting the iPod touch to your computer 13 Connecting to WLAN 14 Connecting to the Internet 14 Configuring Mail and Other Accounts 14 Apple ID 15 Manage content on your iOS devices 15 iCloud 17 Synchronize with iTunes 18 Date and time 18 Country settings 18 The name of your iPod touch 18 View this manual on iPod touch
Chapter 3: Basics 19 Using Apps 21 Adjusting the iPod touch 23 Text input 26 Dictating 27 Voice control 28 Search 28 Inspection centre 29 Notices and message centre 30 Activating and deactivating tones 30 Not disturbed 31 AirDrop, iCloud and other ways to release 32 Transfer of files 32 AirPlay 32 AirPrint 33 Bluetooth equipment 33 Restrictions 34 Data protection 34 Security 36 Charge the battery and check its battery life 37 Traveling with iPod touch

Chapter 4: Siri 38 Using Siri 39 Share personal information 39 Correcting Siri 39 Settings of Siri
Chapter 5: News 40 iMessage service 41 Sending and receiving messages 42 Management of conversations 42 Share photos, videos and other information 43 Settings for messages
Chapter 6: Mail 44 Writing of messages 45 Preview 45 Draft messages 45 Showing important news 46 Annexes 47 Processing of several messages 48 Addressing and securing 48 Printing of messages 48 Mail settings
Chapter 7: Safari 49 Safari at a glance 50 Search 50 Surfing 51 Bookmarks 52 Release 52 Automatic filling 53 Readers 53 Reading list 53 Data protection and security 54 Safari settings
Chapter 8: Music 55 iTunes Radio 56 Buying and importing music 57 Search and reproduction 59 Album overview 59 Audiobooks 60 Playback lists 60 Genius 61 Siri and voice control 61 iTunes Match 62 Private release 62 Music settings
Content 3

Chapter 9: FaceTime 64 FaceTime at a glance 65 Making and receiving calls 65 Managing calls
Chapter 10: Calendar 66 Calendar at a glance 66 Invitations 67 Using Multiple Calendars 68 Sharing iCloud Calendars 68 Calendar settings
Chapter 11: Photos 69 Viewing photos and videos 70 Sorting images and videos 71 iCloud Photo Sharing 72 My photostream 73 Send photos and videos 74 Editing photos and shortening videos 74 Printing of photos 74 Photo settings
75 Chapter 12: Camera 75 Camera at a glance 76 Recording of photos and videos 78 HDR 78 Display, release and printing 78 Camera settings
83 Chapter 15: Cards 83 Searching for places 84 Retrieval of information 84 Directions 85 3D and flyover views 85 Setting the settings for “cards”
Chapter 16: Videos 86 Videos at a glance 87 Adding Videos to Your Media Library 88 Reproduction control 88 Settings for videos
Content 4

Chapter 20: Game Center 95 Game Center at a glance 96 Playing with friends 97 Game Center Settings
Chapter 22: iTunes Store 99 iTunes Store at a glance 99 Searches 100 Buying, borrowing or redeeming vouchers 101 Settings of the iTunes Store
102 Chapter 23: App Store 102 App Store at a glance 102 Search for Apps 103 Buying, redeeming gift cards and downloading 104 Settings of the App Store
110 Chapter 26: Speech Memos 110 Voice Memos at a Glance 110 Recording 111 Listening 111 Moving recordings to your computer
113 Chapter 28: Nike + iPod 113 Nike + iPod at a glance 114 Connecting and calibrating the sensor 114 Training 114 Settings of “Nike + iPod”
Content 5

Annex A: Operating aids 115 Functions of the control aid 116 Short command for operating aids 116 VoiceOver 129 Sirius 129 Zooms 130 Reversal of colours 130 Reading out the selection 130 Reading Auto-Text 131 Big text and big text 131 Reducing the movement of screen objects 131 Labels for on/off switches 131 Hearing aids 132 Subtitles and extended subtitles 132 Mono-Audio 132 Assignable tones 133 Guided access 133 Switch control 137 AssistiveTouch 138 Keyboards in landscape format 138 Voice control 138 Operating aids in OS X
142 Annex C: Safety, handling & support 142 Safety information 145 Important information about handling 146 iPod touch support website 146 Restarting or restarting, respectively. Reset the iPod touch 146 Reset iPod touch settings 147 Get information about your iPod touch 147 Information on use 147 Deactivate the iPod touch 147 VPN settings 148 Profile settings 148 Creating an iPod touch backup 149 Update and restore iPod touch software 150 Sell or Give Away iPod Touch 150 Further information, service and support 151 Declaration of compliance with FCC guidelines 151 Declaration on Legal Provisions in Canada 152 Information on disposal and recycling 153 Apple and the Environment
Content 6

iPod touch overview This guide describes the features of iOS 7 and iPod touch 5. Generation.
iPod touch 5. Generation (16 GB)

iPod touch 5. Generation (32 GB or greater)





The choice of apps and features for iPod touch can vary depending on location, language, phone provider and iPod touch model. Underground www.apple.com/en ios/feature-availability shows you which functions are supported in your region.

Apple EarPods: You can use the Apple EarPods to play music, videos, audiobooks, podcasts and games.
Connecting cables: Connect the iPod touch to your computer via Lightning-on USB cable to sync or load it. Optionally, you can also use a USB power supply for charging (available separately).
iPod touch-loop (for models from 32 GB): With the loop (hand strap), iPod touch can be worn easily and safely. On the back of iPod touch, press on the button to make it pop out, swipe the loop over and tighten it.
Chapter 1 iPod touch at a glance 8

Multi-Touch Display With the brilliant multi-touch display, you have a world of information, entertainment and creativity at hand. A handful of simple gestures (typing, moving, striking or pulling movements and closing and tightening) are all you need to explore and use iPod touch apps.

Most buttons used for iPod touch are virtual keys that appear on the touchscreen. There are also some physical buttons for basic functions such as turning on the iPod touch and volume control.
Standby button If you are not using the iPod touch, by pressing the standby button, you can lock the iPod Touch. When the iPod touch is locked, it puts the screen to sleep mode which saves battery power and also prevents apps or functions from being unintentionally opened by touching the touchscreen. You can still listen to music and change the volume through the volume buttons on the side of iPod touch, as well as FaceTime calls, text messages, notifications etc. obtained.

The iPod touch is automatically locked when you close the screen ca. Do not touch for 1 minute. You can change the lock time under “Settings” > “General” > Profiles.
Turn on the iPod touch: Hold the standby button until the Apple logo appears.
Chapter 1 iPod touch at a glance 9

Unlocking the iPod touch: Press the Standby or Home button and move the slider.
Turn off the iPod touch: Press and hold the standby button until the red slider fades in, swiping your finger over the slider.
For added security, you can also set a code to unlock the iPod touch. Select “Settings” > “General” > "Code lock". For more information, see Using a Data Protection Code on page 34.
Home button The Home button will take you back to the home screen from anywhere and can be used for some more useful shortcuts. In the Home screen, tap any app to open it. More information can be found on the Home screen at page 19.
Viewing the opened apps: Press the Home button twice. More information can be found on the Home screen at page 19.
Using Siri or voice control: Press and hold the Home button. For more information, see Chapter 4, Siri on page 38 and Voice Control on page 27.
Finally, you can also use the Home button to activate and deactivate the operating aids. Further information is available under short command for operating aids on page 116.
Volume control If you listen to music, movies or other media, the buttons on the side of iPod touch can adjust volume. Otherwise, the keys control the volume for hints and other tones.

Locking of the volumes of ring and indicative tones: Open “Settings” > “Tones” and disable the option “Change with buttons”. Also for music and videos you can set a maximum volume. The corresponding option can be found in "Settings" > "Music" > “Maximum volume”.
Note: In some EU countries, iPod touch may alert you that your set volume is above the guidance recommended by the EU hearing protection directives. To set a volume above the guideline, you may need to release the volume control at short notice. If you want to set the maximum volume for your headphones to the guideline, you can select “Settings” > “Music” > "Maximum Volume”. Select Settings > General > Restrictions to prevent changes in maximum volume.
Display of audio reproduction controls: If the iPod touch is locked or you are using another app, swipe from bottom to top on the screen to open Control Center.
Chapter 1 iPod touch at a glance 10

Use the “Do Not Disturb” option: To mute FaceTime calls, cue tones and notifications, swipe up from the bottom of your screen to open Control Center and tap . Further information is available on page 30, Do not disturb.
You can also use the volume button to take a photo or video. For more information, see Taking Photos and Videos on page 76.
The icons at the top of the screen in the status bar display information about iPod touch:
Status bar symbol
WLAN The iPod touch is connected to the Internet via WLAN. Further information is available on page 13 below Connect to WLAN.
Network activity There are networking activities. This icon may be used by third-party apps to display an active process.
Synchronization The iPod touch is synced with iTunes.
Flight mode The flight mode is activated, d. You cannot access the Internet and do not use Bluetooth® devices. Functions that do not require radio links are available. For more information, see Traveling with iPod touch on page 37.
Not disturbed The “Do not disturb” option has been activated. For more information, see Do Not Disturb on page 30.
VPN They are connected to a network via VPN. For more information, see VPN settings on page 147.
Portrait format lock The iPod touch screen is locked in portrait format. For more information, change the screen orientation on page 21.
Clock An alarm clock was set. For more information, see Wecker and Timer on page 82.
Location services An app uses location services. Further information can be found in Data Protection on page 34.
Bluetooth® Blue or white symbol: Shows that Bluetooth is on and a device (for example, headset) connected.
Grey symbol: Bluetooth is activated. If a device is connected, it may be out of range or has been turned off.
No symbol: Bluetooth has been deactivated.
For more information see Bluetooth devices on page 33.
Bluetooth battery This icon shows the battery charge state of a connected Bluetooth device.
Battery This icon shows the state of charge for iPod touch battery or the status of charging. For more information see Battery Charging and Testing of the BatterY Life on page 36.
Chapter 1 iPod touch at a glance 11
Significance

· ATTENTION: Read the information about injury prevention under Security Information on page 142 before using iPod touch.
Setting up iPod touch You only need a Wi-Fi connection to setup and activate your iPod touch. Optionally, you can also connect the iPod touch to a computer and set it up via iTunes (see next section Connecting your iPod touch into the computer). For certain features, it is recommended to use an Apple ID (for example iCloud, FaceTime, App Store and iTunes store).
Configure and activate the iPod touch: Turn on your iPod touch and follow the instructions of the setup assistant.
The assistant will guide you through the various setup phases:
You can also restore iPhone from an iCloud or iTunes backup during configuration.
Connect the iPod touch to your computer Plug in the iPod Touch to set it up. This may also be necessary to complete the wireless setup.
You can also connect iPod touch to your computer for syncing music, videos and more data with iTunes. You can also sync content wirelessly with your computer. For more information, see Synchronizing with iTunes on page 17.

In order to use your iPod touch together with your computer, you need the following:
Connecting the iPod touch to your computer: Use the Lightning-on USB cable supplied with iPod touch mitge.



Connect to WiFi When displayed at the top of your screen, you are already connected to a WLAN network. The iPod touch automatically connects when you are back in the same place.
Configuring your own WLAN network: If you have enabled an AirPort base station that is not yet configured and within range, then you can set it up using iPod touch. Select Settings > Wi-Fi and select Configure AirPort Base Station. Tap on the desired base station – the setup assistant does the rest.
Chapter 2 Introduction 13

Managing an AirPort network: If the iPod touch is connected to an AirPort base station, select “Settings” > “Wifi,” and tap next to the name of the network and after that on Manage Network. Tap OK if you haven’t loaded the AirPort utility yet to open and load the App Store.
Connect to the Internet The iPod touch establishes connection to the internet via Wi-Fi networks. Once connected to a Wi-Fi network with Internet access, the iPod touch automatically activates the internet connection when you use Mail, Safari, YouTube, FaceTime, Game Center, Stocks, Cards, Weather, App Store or iTunes store.
Configuring Mail and other accounts The iPod touch works with iCloud, Microsoft Exchange and most Internet-based email, contacts and calendar service providers.
You can set up a free iCloud account under “Settings” when you first setup the iPod touch (or later). More information on iCloud at page 15.
Setting up an account: Tap on “Settings” > “Mail, Contacts, Calendar” > Add Account. You can also set up an iCloud account using “Settings” > “iCloud”.
You can also add contacts using an LDAP or CardDAV account if your company or organization supports it. For more information, see Add Contacts on page 108.
You can add calendars via a CalDAV account and subscribe to iCalendar (.ics) calendars or Import them from mail. For more information, see Using Multiple Calendars on page 67.
Apple ID The Apple ID is the login or login information for almost all of Apple’s offers and services – iCloud to store your content, App Store to load apps and iTunes Store to shop for music titles, movies and TV shows.
For all the functions and services you want to use with Apple, an Apple ID is sufficient. The iPod touch prompts you to enter your Apple ID when configuring the iPod touch for the first time or if you want to sign up to use an Apple service. If you do not yet have an Apple ID, you can create this ID at any time during the registration process.
Creating an Apple ID: Select Settings > iTunes & App Stores and tap Sign up. (If you are already logged in and want to create another Apple ID, tap the currently used Apple ID first and then “Log out.”)
More information can be found in appleid.Apple.com/en
Chapter 2 Introduction 14

Managing content on your iOS devices You can transfer information and files between your iOS device and computer via iCloud or iTunes.
You can use iCloud or iTunes, depending on your needs, or both. For example, in iCloud you can automatically send photos that you took with iPod touch to other devices and sync them to the iPod touch using iTunes Photo Albums on your computer.
In the “Overview” section of your device, you can also manage content from iTunes manually. This allows you to add songs and videos by selecting a track, video or playlist in your iTunes library and moving it to your iPod touch in iTunes. This is helpful if your iTunes library contains more objects than fit on your device.
When you use the free iCloud account, iCloud stores your content including music. Photos, contacts, calendars and supported documents. Content stored in iCloud is wirelessly transferred to your other iOS devices and computers configured with thesel ben iCloud account.
iCloud is available for devices running iOS 5 (or later), Mac computers running OS X Lion 10.7.8 (or newer) and PCs that have the control panel object “iCloud” installed on them (Windows 7 or Windows 8 required).
The iCloud features include:
Chapter 2 Introduction 15

You get a free email account in iCloud and 5 GB of storage for your e-mails, documents and backups. Purchased music, apps and TV shows are not deducted from the free storage space.
Sign in to an iCloud account or create an icloud account and set the iCloud options: Select “Settings” > “iCloud”.
Purchase additional iCloud storage: Open Settings > iCloud > Storage & Backup and tap Manage storage space. More information about acquiring additional storage at help.Apple.com/icloud
Showing and loading of previous purchases:
Activate the “Automatic Downloads” option for music, apps or books: Select Settings > iTunes & App Stores.
More information about iCloud can be found in www.apple.com/en/icloud www.apple.com/chde/icloud Further information can be obtained under www.apple.com/en/support/icloud
Chapter 2 Introduction 16

Synchronize with iTunes Syncing with iTunes copies data from your iPod touch to your computer and vice versa. You can sync the iPod touch by connecting it to your computer. Alternatively, you can set up syncing over a wireless network (WLAN) in iTunes. You can set what content (photos, videos, podcasts, apps etc.) to sync in iTunes. For more information about syncing iPod touch to your computer, open iTunes and select “iTunes Help” from the “Help” menu.
Wireless synchronization: Connect iPod touch: Launch iTunes on your computer, select your iPod touch, click “Overview” and enable the option to sync with this iPod over Wi-Fi.
If synchronization is activated via WLAN, the iPod touch will be synced automatically. For this, the iPod touch must be connected to a power source. Both the iPod touch and computer must be on the same wireless network, and iTunes must be open on your computer.
If you use iCloud to save your contacts, calendars and bookmarks, don’t sync them with iPod touch via iTunes.
Chapter 2 Introduction 17

Date and Time The date and time are usually set based on your current location. Look at the lock screen to check that date and time are set correctly.
Activate the automatic date and time setting through your iPod touch: Select “Settings” > “General” > "Date & Time" and activate or deactivate the option “Automatically Set”. If you have configured the iPod touch to automatically update your time, it will receive the correct time based on your Wi-Fi network. Occasionally, it may happen that the iPod touch cannot determine the local time automatically.
Manually set date and time: Select “Settings” > “General” > "Date & Time" and disable the option “Automatically Set”. Tap on “Time Zone” to set your time zone. Tap on “Date & Time” and set to “Dated & Time”.
Set the time format for iPod touch (24-hour or 12-hour): Select “Settings” > “General” > "Date & Time" and activate or deactivate the 24-hour clock. (The 24-hour format may not be available in all regions.)
The name of your iPod touch is used by both iTunes and iCloud.
Changing the name of your iPod touch: Select “Settings” > “General” > "Info" > "Name".
Watch this manual on iPod touch Das iPod touch user manual It can be viewed on the iPod touch in Safari and in the free app “iBooks”.
View the user manual in Safari: Tap and then click on the “iPod touch user manual” bookmark.
Chapter 2 Introduction 18

Use Apps All apps that are installed on your iPod touch ex works and all the apps you download yourself from the App Store are located on the Home screen.
The Home Screen Tap an app to open it.

Press the Home button at any time to get to the Home screen. Swipe left or right to switch to another screen.

You can run multiple apps on your iPod touch at the same time.

Viewing all running apps: Press the Home button twice. Swipe left or right to see more apps. You can switch to another app by tapping on it.

Quitting an app: If an app is not running properly, you can immediately stop it from the multi-tasking screen by swiping your finger up. After that, try to open it again.
If many apps are installed, you can use Spotlight to search for an app to open it specifically. From the center of the home screen, move your finger down to open the search box. For more information, see Search on page 28.
General orientation Drag a list up or down to show more. Swipe with a sliding finger movement to scroll quickly; if you hold the finger on the screen, it will stop scrolling. Some lists have an index; tap on a letter to jump into the appropriate place.

Move a photo, map or web page in any direction to view more.
Chapter 3 Basic principles 20

Zooming in and out You can enlarge a section of a photo, web page or map by winding it up with two fingers – and shrinking it back down again by contracting the two finger. In the Photos app, you can repeatedly display the collection or album in which the current photo is located.

You can also zoom in a photo or website by double-taping and zoom out again by double typing. Cards can be zoomed in by double-tapping and zoomed out by one-time typing with two fingers.
Change the screen orientation Many apps open a different view when you rotate the iPod touch.

You can lock the screen in portrait format. To do this, swipe up from the bottom of your screen to open Control Center and tap .
Arrange Your Apps Running Apps: Place your finger on an app icon in the Home screen until it starts to wobble, and move it to its desired position afterward. Slide an app to the edge of the screen to move it into another home screen, or into the dock at the bottom of the display. Press the Home button to backup your changes.

Chapter 3 Basic principles 21

Creating a new home screen: When you rearrange apps, move an app to the far right of the last home screen. The dots above the dock show the number of your home screens. At the same time, you can tell by which of these screens you are on.
You can also set up the Home screen with iTunes when iPod touch is connected to your computer. In iTunes, select your iPod touch on the left sidebar and click “Apps”.
Reset: Select Settings > General > Reset to return your home screen and apps back to their original layout. Folders are removed and the original background image is restored.

Create a folder: When you arrange your apps, move one app to another. Tap the name of the folder created to rename it. Move apps to add or move them. When you are done, press the Home button.
A folder can have multiple pages with apps.
Deleting a folder: Drag all apps from the folder – the script is automatically deleted.
Change the background image With the “Background Image” setting, you can select an image or photo as a background image for the Code Lock screen or Home screen.

Change the background image: Select “Settings” > “Brightness & Background”.
Chapter 3 Basic principles 22

Adjusting the Brightness Darken the screen to increase battery life.

Adjusting the brightness of the screen: Select “Settings” > “Brightness & Background” and move the slider. You can also adjust the brightness in the control center.
Text input With the screen keyboard you can enter text if necessary.




iPod 09:41
Alternatively, you can connect an Apple Wireless Keyboard. For more information, see Using an Apple Wireless Keyboard on page 25. Information about the “dictate” function (if you do not want to enter text, but dictate) can be found in Dictates on page 26.
Tap the Shift button to enter capital letters. You can also tap the Shift button with your finger and, without picking it up, move the finger from there to the desired letter key. Tap the Shift button twice to activate the Lock key. Tap the Number key or Symbol button to enter numbers, punctuation marks, or symbols. You can automatically enter a point and space at the end of a sentence by tapping twice on the Spacebar.

To enter an alternative character, place fingers on a button and slide to the desired option
To enter an alternative character, place fingers on a button and slide to the desired option
Chapter 3 Basic principles 23

Depending on the app and language set, iPod touch may correct spelling errors when entering text and offer word suggestions. You can accept the word suggestion by entering a space or punctuation mark, or tapping on the line switch. If you want to reject the proposal, tap on the “x” icon. If the same suggestion is rejected several times, iPod touch will stop fading it. Tap on a red underlined word to show suggestions for correction. If the desired word is not displayed, you can enter the correction yourself.

Proposed word Proposed words
Select “Settings” > General > Keyboard to set the options for text input via keyboard.
Editing text Correcting text: Place your finger on a text object to fade the magnifying glass and move the insertion mark in the enlarged section to the desired character position.

Selecting text: Tap the insertion point to indicate the selection options. Optionally, you can also select a word by double-tapping. Move the asset points to expand or reduce your choice of text characters. Tap into documents that you only have read access to (e.g., ). B. Web pages), on a word to select it.
You can cut or copy selected text, or insert it instead of another text. For some apps, you can also set or underline text boldly or in italics (tap B/I/U), show the definition of a word, or have your iPod touch suggest an alternative. Tap to see all the options.
Revocation of the last processing operation: Shake the iPod touch and tap “Recall”.
Chapter 3 Basic principles 24

A short command offers the advantage that you only have to type a few characters in order to enter a word or string of words. For example, “adw” is extended to “On the way!” Select “Settings” > “General” > "Keyboard" if you want to set more such shortcuts in addition to this example.
Creating a short command: Tap on “Settings” > “General” > "Keyboard" and then click on “Add Short Command.”
Preventing the correction of a word or sentence by iPhone: Create a short command, but leave the Short Command field empty.
Continuous updating of the personal dictionary on your devices with iCloud: Select Settings > iCloud and select Documents & Data.
Using an Apple Wireless Keyboard You can also use an Apple Wireless Keyboard (available for sale as a sepa rat) to input text on iPod touch. You need to pair the keyboard with iPod touch, because the connection is via Bluetooth.
Pairing an Apple Wireless Keyboard with iPod touch: Turn on the keyboard, select “Settings” > “Bluetooth,” and activate “BlueTooth.” After that, tap the keyboard when it appears in the device list.
When the keyboard is coupled, it connects to iPod touch once within reach of iPod touch (up to 10 meters). When an Apple Wireless Keyboard is connected, the screen keyboard will no longer be displayed.
Savings on battery life: Turn off Bluetooth and the wireless keyboard as long as you are not using it. You can turn off the keyboard by holding down the standby button until the green light goes out.
Disconnecting a wireless keyboard is similarly easy: Select “Settings” > “Bluetooth,” and tap next to the name of the keyboard, and after that on “Ignore this device.”
For more information, see Bluetooth devices on page 33.
Adding or modifying keyboards You can enable or disable input functions such as spell correction, add foreign-language keyboards and change the occupancy of your onscreen keyboard or Apple Wireless Keyboard.
Setting of the input functions: Select “Settings” > “General” > "Keyboard".
Adding a foreign-language keyboard: Tap on “Settings” > “General” > "Keyboard" > “Keypads”, and then click on “Add Keyboard”.
Switching between keyboards: If you have set up foreign-language keyboards under "Settings" > "General" > “Country Settings"> "Keyboards", you can switch between them with the shortcut "Command blank button".
For more information on international keyboards, see Using International Keyboards at page 139.
Change the keyboard assignment: Tap on “Settings” > “General” > "Keyboard" > “Keypads”, select a keyboard and set the keyboard assignment.
Chapter 3 Basic principles 25

Instead of entering text, you can also dictate it. Make sure Siri is enabled (in the Settings > General > Siri pane) and that iPod touch is connected to the Internet.
Dictating text: Tap on the screen keyboard and dictate something. Finally, tap on “Done.”

Indicates that Siri is processing the understood indicates that Siri will process the understood
Add text: Tap again and continue dictating. To insert text, first place the paste mark at the target position. You can also replace already selected text with dictated text.
Adding punctuation marks and formatting text: Dictate the punctuation marks or formatting command. For example, if you dictate “Dear Maria comma the check is in the post exclamation point,” the result will be: “Dearest Mary, the cheque is in The Post!”
Chapter 3 Basic principles 26

Voice control allows you to make FaceTime calls and control playback of music. You can also use Siri to control the iPod touch using voice. For more information, see Chapter 4, Siri, on page 38.

Using voice control: You can turn Siri off under “Settings” > “General” > "Siri". Then hold the Home button until the voice control options screen appears and you hear an acoustic signal.
The best results are achieved if you consider the following:
Changing the language (or dialect or country) for voice control: By default, voice control assumes that you are speaking the voice commands in the local language set for iPod touch (in General > Country Settings > Language). Tap on "Settings" > "General" > “Country Settings"> "Voice Control", if you want to speak the voice control commands in another national language.
For the app “Music” voice control is switched on by default. However, you can arrange for FaceTime voice dialing to be prevented when the iPod touch is locked. Tap on “Settings”, select “General” > “Code lock” and disable the option “Voice dial”.
Specific commands can be found in Siri and voice control on page 61. Further information on voice control and the use of voice control commands in different languages can be found in support.apple.com/kb/HT3597?viewlocale=en DE
Chapter 3 Basic principles 27

Many apps have a search field where you can enter a search term to find information that the app has stored for it. Spotlight Search allows you to search all apps at once.
Searching the iPod touch: From the center of any Home screen, move your finger down to display the search box. The search results are automatically displayed in parallel with the text input. Tap Search to hide the keyboard so that more search results can be displayed. Tap an entry in the list to open the corresponding object in each app.
You can also use Spotlight Search to search and open apps.

Select the apps and content to search: Select “Settings” > “General” > "Spotlight Search". You can also adjust the search order.

The control center allows direct quick access to the camera, flashlight, AirDrop, AirPlay, timer, audio playback controls and many other useful functions.
Opening of the control centre: Swipe your finger up from the bottom of any screen; (this also works in the lock screen).
Chapter 3 Basic principles 28

You can set the screen brightness, lock the screen in portrait format, turn wireless services on or off and enable AirDrop to share photos and other objects with iOS 7 devices near you. For more information, see AirDrop, iCloud and other sharing options on page 31.
Opening the currently playing audio app: Tap on the song title.
Closure of the control centre: Swipe your finger down, tap the top of the screen or press the Home button.
Some apps are set up to show the number of new objects on the Home screen along with their icon, such as the number that has recently arrived email messages. In the event of a problem (for example, if a message could not be sent), an exclamation point will appear on the app icon. For a folder, the small number displayed represents the total number of notifications and messages for all apps in that folders.
Notifications can also be displayed on the ‘Code lock’ screen.
Responding to a message with the iPod touch locked: Delete the message from left to right.
Muting of messages: Open “Settings” and activate the option “Do not disturb”.
Setting of sounds: Select “Settings” > “Tones”.
Chapter 3 Basic principles 29

Communication centre The messaging center collects all the messages for you in one place so that you can read and respond to them whenever possible. You can either insert all the hints or only those that you missed. You can also tap on the Today tab for a specific summary of each day’s events – such as weather, dates, birthdays, stock prices and even a brief overview of next-day tasks.
Opening of the message centre: Swipe down from the top of the screen.

Determine the messaging options: Select “Settings” > “Communication Center”. Tap an app to set its messaging options. You can also tap Edit to set the order of app messages. Tap and move the icon to another position.
Close the message centre: Swipe your finger up.
Activate and disable sounds You can change or deactivate the beeps that your iPod touch outputs when receiving FaceTime calls, text messages, emails, tweets, Facebook notifications, reminders, or other events.
Setting the sound options: Select Settings > Tones to access the ring and hint options, as well as their volume.
For information on how to temporarily mute incoming calls, hints and sound effects, see the section below.
Do Not Disturb With the “Don’t disturb” option, you can easily mute iPod touch whenever you want to go into a meeting or sleep. This will ensure that no acoustic signal sounds during a FaceTime call or notification and the screen does not light up.
Activate the Do Not Disturb mode: Swipe up from the bottom of your screen to open Control Center and tap . As long as the “Do not disturb” option is activated, it will appear in the status bar.
Configure the “Do Not Disturb” option: Open “Settings” and activate the option “Do not disturb”.
Chapter 3 Basic principles 30

You can schedule rest periods, allow calls from your favorites or specific groups of contacts and allow multiple calls to be allowed through in case of emergencies. You can also set whether the iPod touch is muted only in locked state or unlocked state by using the “Do not disturb” option.
AirDrop, iCloud and other sharing options Many apps let you tap or “Send” to view the share options and other options. Which options are available in individual cases depends on the respective app.

AirDrop offers the ability to exchange photos, videos, interesting web pages and other objects on-the-go with other iOS 7 devices that are near you and support AirDrOP as well. For AirDrop, you need an iCloud account. The information is transmitted via WLAN or Bluetooth. The devices must either be in the same WLAN or not more than 10 meters apart. For security reasons, the transferred information is encrypted.
Sharing objects via AirDrop: Tap on “Send” or then on and after that, AirDrop. Then tap on the name of an AirDrop user near you. AirDrop is also available to you in the Control Center, which can be viewed by swiping up from the bottom of the screen.
Receiving AirDrop objects from others: Swipe up from the bottom of your screen to open Control Center. Tap AirDrop and specify whether you want to receive objects from any user or only those users that are included in your contacts. They may accept or reject such requirements.
Adding photos or videos to a shared stream: Tap on iCloud (one of the options offered in the Photos app when you send or share), select a stream (or create a new stream) and finally tap Post.
Using Twitter, Facebook, Flickr or Vimeo: Sign in to your account under the “Settings” section. Using the Share buttons on Twitter, Facebook, Flickr and Vimeo you will be redirected directly to the correct settings if you are not yet logged in.
Chapter 3 Basic principles 31

There are several ways to transfer files between the iPod touch and your computer or other iOS device. If you use an app that supports iCloud on multiple devices, you can use iCloud to keep your documents of the relevant app up-to-date across all those devices. For more information, see iCloud on page 15.
You can transfer files with iTunes. Connect the iPod touch to your computer via the included cable. In iTunes on your computer, select your iPod touch and click “Apps”. Use the File Sharing area to transfer documents between your iPod touch and your computer. Apps that support file sharing will appear in the Shared Apps list in iTunes. To delete a file, select the file from the list and press “Delete” button after that.
You can also view files that were received as an email attachment on the iPod touch.
Some apps allow you to share content through AirDrop. For more information, see AirDrop, iCloud and other sharing options on page 31.
AirPlay lets you stream music, photos and videos wirelessly to an Apple TV and other AirPlay-enabled devices that are part of the same network as iPod touch.
Showing the AirPlay controls: Swipe up from the bottom of your screen to open Control Center and tap .
Streaming content: Tap on and then tap on the device you want to stream content onto.
Switch playback to iPod touch: Tap and select “iPod touch”.
Parallel display of the iPod touch screen on a TV: Tap, select an Apple TV and tap “Screen Syncing.” When AirPlay syncing is enabled, a blue bar appears at the top of the iPod touch screen.
With an appropriate Apple cable or adapter, you can also connect the iPod touch to a TV, projector, or other external screen. Further information can be found in http://support.apple.com/kb/HT4108?viewlocale=en EN
AirPrint offers you the ability to wirelessly print content displayed in apps like Mail, Photos and Safari on a printer that supports AirPriunt technology. Many apps offered in the App Store also support AirPrint.
The iPod touch and printer must be connected to the same Wi-Fi network. More information about AirPrint can be found in support.apple.com/kb/HT4356?viewlocale=en DE
Printing a document: Tap on or (depending on the app used).
Displaying the status of a print job: Click the Home button twice and tap on “Print Center”. The small number on the icon indicates how many documents are in the printer queue.
Cancellation of a print job: Select the corresponding job in the printing center and tap on “Cancel print”.
Chapter 3 Basic principles 32

Bluetooth devices You can use Bluetooth devices such as headsets, hands-free devices, stereo headphones or an Apple Wireless Keyboard in conjunction with your iPod touch. Supported Bluetooth profiles can be found in: support.apple.com/kb/HT3647?viewlocale=en DE
Note: Using certain accessories with iPod touch can interfere with wired loose communication. Note that not all accessories for iPhone and iPad are fully compatible with iPod touch. Audio interference between the iPod touch and an accessory device may be eliminated by enabling Airplane Mode. Realignment or positioning of the iPod touch and connected accessory device can improve wireless communication performance.
Activation of Bluetooth: Select “Settings” > “Bluetooth”.
Connect to a Bluetooth device: Tap the device in the Device List and follow the instructions shown to connect. Follow the instructions for pairing under Bluetooth in device documentation. For more information about using the Apple Wireless Keyboard, see Using an Apple Wireless keyboard on page 25.
The iPod touch must be within a maximum of 10 meters from the Bluetooth device.
Reset audio to iPod touch: Deactivate the device or trench the connection. Alternatively, under Settings > Bluetooth you can disable Bluetooth or use AirPlay to restore audio back to iPod touch. More information on AirPlay at page 32. Audio playback is reset to iPod touch when the device is out of range.
Disconnecting a device: Select Settings > Bluetooth and tap next to the device, after which click Ignore this device. Make sure Bluetooth is enabled when the device list does not appear.
Restrictions You can set restrictions on some apps and purchased content. For example, as a parent you can set music marked “Explicit” not to appear in playlists or you cannot allow changes to certain settings. The restrictions can prevent the use of certain apps, installation of new apps or changes to accounts or maximum volume.
Activation of restrictions: Open the “Settings” > “General” > "Restrictions". Then tap on “Activate restrictions”. You will be prompted to set a code for the restrictions, which you must enter later if you want to make changes to the limitations. This code does not have to be identical with the code you use for unlocking iPod touch.
Chapter 3 Basic principles 33

Privacy Settings let you view and control which apps and system services have access to location services, your contacts, calendars, reminders and photos.
The location services allow apps such as “Maps”, “Camera” and “Passbook” and stand-based apps from other providers to collect and use data relating to your location. Your approximate location is determined on the basis of information available over local WLAN networks (if Wi-Fi has been activated). Location information collected by Apple is gathered in a way that does not allow any conclusions to be drawn about your personal identity. If an app uses location services, it appears in the menu bar.
Activation or deactivation of the location services: Select “Settings” > “Privacy” > "Location Services". You can disable location services for all or individual apps and services. When you turn off Location Services, it prompts you to activate them again the next time an app tries to use this feature.
Deactivating the location services for system services: Some system services (for example, location-based iAds) use the Location Services. Select “Settings” > “Privacy” > Location Services > System services” if you want to see the status of those services, enable or disable the services, or get the icon displayed in the menu bar when the services use your location information.
Disabling access to personal information: Select “Settings” > “Privacy”. You can check which apps and features have tried to access the following information, and which apps were allowed to do so:
You can disable access to each app for each information category individually. Read the third-party apps usage and privacy policy to learn for what purposes data requested by the apps is used.
Security The security and protection features help you protect the information on iPod touch from unauthorized access.
Use of a code for data protection When delivered ex works, the iPod touch is configured so that no code has to be entered in order to unlock the lock. However, you can set a code that must be entered each time you turn on iPod touch or leave standby mode.
Determination of a code: Tap on “Settings”, select “General” > “Code Lock” and enter a four-digit code.
Chapter 3 Basic principles 34

By setting a code, data protection is activated. Using your code, iPod touch-stored email and attachments are encrypted with 256 bit AES encoding. (Other apps may also use privacy.)
Improving safety: Deactivate the “Simple Code” option and use a longer code. A code consisting of letters and numbers can be entered using the on-screen keyboard. If you prefer to unlock the iPod touch using its numeric keyboard, you can set a longer number code.
Allowing access to Siri with locked iPod touch: Select “Settings” > “General” > "Code lock". The optional functions include:
Allowing access to Siri with locked iPod touch: Select “Settings” > “Control Center”. Further information can be found in the Control Centre on page 28.
Forcing data deletion after ten failed code input attempts: Tap on “Settings”, select “General” > “Code lock” and tap on “Delete data”. After ten failed attempts at code entry, all settings are reset and all information and media is deleted by removing the code used for data encryption.
If you have forgotten your code, then you need to restore iPod touch software. For more information, see Restoring iPod touch on page 149.
Restricting Ad-Tracking Restrict or Resetting Ad-Tracking: Select “Settings” > “General” > "Privacy" > “Advertising”. Enable the Restrict Ad Tracking option to prevent apps from accessing your iPod touch’s ad ID. Further details can be found under “More information”.
The “Find my iPod touch” feature includes the following: The Find My iPod touch feature can help you to locate and protect your iPod touch. To do this, use the free (available in the App Store) Search for My iPhone app on another iPod touch, iPad or iPhone, or the web browser on a Mac or PC if you are at www.icloud.com registered. If you enable the “Find my iPod touch” option, activation lock will also be activated automatically. This will help you prevent theft of your iPod touch, as any person trying to delete or reactivate your device must enter your Apple ID and password.
Activate “Find my iPod touch”: Select “Settings” > “iCloud”.
Chapter 3 Basic principles 35

Using the search functions of “Find My iPhone”: On an iOS device, open the “Find my iPhone” app or show your website in a browser on your computer www.icloud.com an. Sign up and select your device.
Charging the battery and checking its battery life The iPod touch has an internal rechargeable lithium-ion battery. More information about the battery, including tips for maximizing battery life www.apple.com/en/batteries www.apple.com/chde/batteries
Charging of the battery: Connect the iPod touch to your computer via the included cable. At the same time, iPod touch can be synced with iTunes. (However, the charging process may take longer if you are loading and synchronizing iPod touch at the same time.)
Connect iPod touch to a USB 2.0/3.0 port on your computer, unless your keyboard is equipped with a high-power USB 2.0 / 3.0 port.



Chapter 3 Basic principles 36

Charging of the battery with a power supply: Connect the iPod touch via the included cable and USB power supply (sold separately) to a socket.
The battery icon at the top right of the screen shows the state of charge for the battery.
Important: If the iPod touch is low battery charge, it may show a virtually empty battery to alert you that your iPod touch needs to be charged for at least 10 minutes before you can use it again. If the iPod touch battery is almost completely discharged, the screen may remain empty for up to two minutes before one of the battery warnings appears.
The number of charge cycles for rechargeable batteries is limited. Therefore, these batteries must be replaced at some point. The battery is permanently installed in the iPod touch and must not be replaced by the user. It may only be replaced by an authorized Apple Service Partner. Further information can be obtained under www.apple.com/en/batteries/replacements.html
Some airlines may allow you to leave your iPod touch on board during your stay, provided that you use the flight mode. This means that WiFi and Bluetooth are disabled, so you can’t make or receive FaceTime calls or use other features that require Wi-Fi. However, you can still listen to music, play games, watch videos or use other apps that don’t require internet access. If the airline allows this, you can also activate WLAN or Bluetooth in flight mode to use the corresponding services.
Activation of the flight mode: Swipe up from the bottom of your screen to open Control Center and tap . You can also turn the flight mode on and off via the “Settings” section. When Airplane Mode is enabled, it appears in the status bar at the top of the screen.
WLAN and Bluetooth can also be switched on or off in the control center.
Chapter 3 Basic principles 37

Using Siri You can fully rely on the power of Siri.
View the Siri Overview: Hold the Home button until you hear Siri’s acoustic signal.
You can now make various requests to Siri, from “set the timer for 3 minutes” to “What movies are going on in cinema this evening?” You can open apps and activate or deactivate features such as Airplane Mode, Bluetooth, Do Not Disturb, and the settings for the operating aids. Siri understands what you say and mean. Therefore, it is not necessary to learn special commands and keywords.

What Siri Understood What Siri Understanding
Siri's answer Siri' s response
For more information, just ask Siri directly: “What can you do?” Alternatively, you can also tap.
Siri often displays helpful information. Tap it to open an app connected with it or get more information.
Changing the gender of Siri voice: Select “Settings” > “General” > "Siri" (maybe not available in all countries and regions).
Using a headset to talk with Siri: Connect the headset and hold the middle button or Press the call button.

Share Personal Information When you share Siri’s personal about yourself, it allows for personalized commands like “Tell me how to get home.”
Collecting personal information for Siri: In the app “Contacts” fill in the card “My Info”. Then select “Settings” > “General” >“Siri” > "My Info" and tap on your name.
Make sure all personal and business addresses are included, as well as your relationships with other people.
Correcting Siri Cancel the last order: Say “Cancel”, tap the Siri icon or press the Home button.
If Siri doesn’t understand something properly, you can edit your request by tapping on it.

Optionally, you can also tap again and repeat your request. For example, say: “I meant Munich”. You do not need to repeat what you not They meant.
Settings of Siri Select “Settings” > General > Siri to set options for Siri. Options include:
Refusing access to Siri when iPod touch is locked: Select “Settings” > “General” > "Code lock". You can also disable Siri by setting appropriate restrictions. Further information under restrictions on page 33.
Chapter 4 Sirius 39

The Message app and built-in service, iMessage lets you send unlimited free text messages over Wi-Fi to other iOS 5 (or newer) and OS X Mountain Lion users (or later). Messages can hold photos, videos and other data. You can see when another person enters text. Conversely, the other people will be informed that you have read their messages. iMessage messages are displayed on all iOS devices that are logged in to the same account. This gives you the ability to start a conversation on one of your devices and continue it on another device. iMessage messages are encrypted before sending for security reasons.


Blue marks an iMessage conversation
Blue marks an iMessage conversation
Type here to enter text Here typing for entering text
Tap here to attach a photo or video tap here to attached a photo, or video
Starting a text conversation: Tap and enter a phone number or email address. Alternatively, you can also tap and select a contact.
If a message cannot be sent, an alert is displayed. Tap the warning in a conversation to resend the message.
Continuing a conversation: Tap the conversation in the news list.
Using image characters: Select “Settings” > General > Keyboard > Keypads > Add keyboard and tap on “Emoji” to make this keyboard available. When you type in a message, tap to switch to the emoji keyboard. For more information, see Special Entry Methods on page 140.
Displaying the receiving or sending time of a message: Pull one of the bubbles to the left.
Calling a person (FaceTime) while exchanging text messages: Tap on “Contact” at the top of the screen and after that.
Viewing a person’s contact information: Tap on “Contact” at the top of the screen and after that. Tap on Information Objects to perform actions like a FaceTime call.
Showing previous messages in a conversation: Tap the status bar to scroll to the beginning. Tap if necessary. “Loading previous messages”.
Sending messages to a group: Tap and enter multiple recipients.
Blocking Unwanted Messages: On the contact card of the corresponding person, tap on “Shut caller”. You can access a person’s contact card by viewing one of their messages and then tapping. You can also lock callers in the Settings > FaceTime > Locked area. Blocked callers will not accept FaceTime calls or text messages. For more information about blocking callers, see support.apple.com/kb/HT5845?viewlocale=en DE
Chapter 5 News 41

Managing Conversations Conversation is backed up in the “Messages” list. A blue dot marks an unread message. Tap on a conversation to view or continue.

Displaying the “News” list: Swipe to the right.
Forwarding a message: Place your finger on a message or attachment, tap “More”, select if necessary. select additional objects and tap .
Deleting a message: Place your finger on a message or attachment, tap “More”, select if necessary. select additional objects and tap . Tap “Delete All” to delete all text and attachments, but not the conversation itself.
Deleting a Conversation: In the news list, swipe right to left over the conversation and tap “Delete.”
Searching in Conversations: In the “Messages” list, tap on top of the screen to display the search field. Then enter the text you are looking for. You can also browse conversations from the home screen. For more information, see Search on page 28.
Share photos, videos and other information You can send photos , videos, locations, contact information and voice memos. The size allowed for attachments depends on your service provider. If necessary, the iPod touch compresses the attached photos and videos.
Send a photo or video: Tap on . You can select an existing photo or video on the iPod touch, or record a new one.
View photos and videos as a full screen: Tap on the photo or video. Tap if you want to view other photos and videos in the conversation. Tap to return to the entertainment.
Sending objects from another app: In the other app, tap on “Send” or and after that on “Message”.
Sending, securing or printing attachments: Tap on the appendix and after that.
Copy a photo or video: Place your finger on the appendix and tap “Copy” after that.
Chapter 5 News 42

Adding a person to your contacts: In a conversation, tap on “Contact” and then “Create new contact.”
Secure contact information: Tap “Contact” at the top of the screen and after that on and on “Create new contact” or on “Add to contact”.
Settings for Messages Select “Settings” > “Messages” to set the options for messages. This includes:
Manage notifications for messages: Further information is available on page 30, Do not disturb.
Set the instruction tone for incoming text messages: Further information on activation and deactivation of tones, page 30.
Chapter 5 News 43

Writing Messages With Mail, you can access all your email accounts on the go.
Change mailboxes or accounts

Delete, move or mark multiple messages
Delete, move or mark multiple messages
News searching for news
Message Write message
Insert a photo or video: Tap the insertion mark or tap on the arrow icons to show more choices. For more information, see Editing Text on page 24.
Quoting text from the source mail: Tap the insertion point and select the text you want to paste. Tap on and then “Reply”.
Sending a message from another account: Tap the “From” field and select the other account.
Change a recipient from "Copy" to "Blind Copie": Once you have entered the recipients, you can move their names from one input field to another or change their order within an input field.

Show a longer preview: Tap on “Settings” > “Mail, Contacts, Calendar” > "Preview". You can display up to five lines.
Display the ‘To’ and ‘Copy’ fields: Tap on “Settings” > “Mail, Contacts, Calendar” > "Show to/Copy". If your name appears in the "Copy" field instead of the "To" field, you were set to "Copie" by the sender. You can also use the “Inbox” where all emails addressed to you are collected. In the list of mailboxes, tap “Edit” if you want to view the mail box.

Saving a draft: If you want to finish a message that started later, tap on “Cancel” and then back up your draft.
Completing a secured design: Put your finger on “Write”. Select the draft in the list and finish your message. After that, you can send them or backup them again as a draft.
Viewing the drafts from all accounts: In the list of mailboxes, tap on “Edit,” “Add inbox” and finally, “All drafts.”
Deleting a draft: In the list of drafts, swipe your finger to the left over a draft and tap on “Delete”.

Collecting important messages: You can add important contacts to your VIP list so that their messages are displayed in the “VIP” mailbox. Tap the sender’s name in a message and after that, “Add to VIP.” In the list of mailboxes, tap “Edit” to display the “VIP” mail box.
Chapter 6 Mail 45

Notify for important messages: The messaging center will notify you when messages arrive in a Favorites mailbox or from your VIP contacts. Select “Settings” > “Communications” > "Mail".
Marking a message to better find it: Tap while you read the message. You can change the appearance of the label to mark messages. To do this, select “Settings” > “Mail, Contacts, Calendar” > "Marking Style". In the list of mailboxes, tap on “Edit” and after that on “Flagged” if you want to display the “Fared” mail box.
Search for a message: Scroll up in the news list to display the search field. You can only search the current mailbox or all of your mail boxes at once. All address lines, the subject and message text are searched.
Search by date: Scroll up the news list (or tap at the top of the newslist) to see the search box, and type in “February Meeting” for example, to show all messages from February that contain the word “Meeting.”
Search by message status: In the search box, type “Label Unread VIP” to see all tagged unread messages from people in your VIP list. You can also search for other message attributes such as “attachment”.
Identifying Unwanted Advertising: Tap while you read a message. After that, tap Move to Advertising to backup the file in the Unwanted Ads folder. If you accidentally marked a message as an unwanted advertisement, shake the iPod touch immediately afterwards to undo it.
Creating a Favorites mailbox: Your favorites will be displayed at the top of the “Postboxes” list. To add a favorite, open the list of mailboxes and select “Edit” tap on “Add Mail Box,” and choose the mail box you want to add. For Favorites mailboxes, you also get push notifications.

Backup a photo or video in your album “Recordings”: Place your finger on the photo or video until a menu appears. After that, tap on the album “Recordings”.
Using an attachment with another app: Tap the attachment and leave your finger on it until a menu appears. After that, tap the name of the app where you want to open the attachment.
Include the attachments in your response: When you respond to a message, the attachments are not included. If you want the attachments to be sent with your response, you need to forward the message instead of replying to it.
Displaying messages with attachments: In the “Appendixes” mailbox, messages from all accounts that include attachments are displayed. To add it, open the list of mailboxes and select “Edit”
Chapter 6 Mail 46


Deleting, moving or marking multiple messages: When viewing a news list, tap on “Edit.” Select some messages or tap on “Specify All” and select an action. If you made a mistake, you can shake the iPod touch to undo this action.
Arrange your messages: You can create your own mailboxes to organize your messages. Tap on “Postboxes” and then edit to create a new post office box or delete or rename an existing postbox. (Some of the built-in mailboxes cannot be changed.) There are several smart mail boxes, for example “unread” that display messages from all your accounts. Tap on the ones you want to use.
Recovering a Deleted Message: Select the “Paperbasket” mailbox and open the message. Then tap and move the message. If you deleted the message immediately before, shake iPod touch to undo it. If you want to display messages in the Trash on all your accounts, you can add the “Paper Bin” mailbox. For this, tap on “Postboxes” and “Edit,” and select it from the list.
Archiving instead of deleting: Instead of deleting messages, you can also archive them so they are still available if necessary. Activate your “Archive” inbox. You will find this option in the “Settings” section > “Mail, Contacts, Calendar” > “Account name“ > Account” > “Extended”. If you want to delete a message instead of archiving it, then you need to put your finger on and tap “Delete”.
Editing a message without opening: In a message, swipe left and tap on “Delete” or “Archive.” You can also tap “More” to move, forward, respond to messages, mark them with a flag or move into the Unwanted Advertising folder.
Keeping messages in the trash: You can set how long deleted messages remain in the trash. Tap on “Settings” > “Mail, Contacts, Calendar” > "Account name“ and then on ‘Account’ > ‘Extended.
Chapter 6 Mail 47


Advertisements who received a message: When the messages are displayed, tap on “Details” in the From field.
Adding a person to your contacts or VIP list: Tap the person’s name or email address.
Printing of messages Printing a message: Tap on and then “Print.”
Printing of attachments or images: Tap on the desired document and after that, tap on and on “Print”.
For more information, see AirPrint on page 32.
Mail settings Tap on “Settings” > “Mail, Contacts, Calendar.” There you have the following options available:
Chapter 6 Mail 48


Double-taps or pulling out with two fingers to enlarge an object
Double-taps or pulling out with two fingers to enlarge an object
Bookmarks, reading lists, Internet history and tweeted links
Bookmarks, reading lists, Internet history and tweeted links
Viewing opened websites or Opening a new page
Viewing opened websites or Opening a new page
Use different ways to release or secure objects Using various ways to free up or secure items
Reopen pages recently visited


Enter desired search term and tap on "Start"
Enter desired search term and tap on "Start"
Or alternatively, tap on a proposal
Or alternatively, tap on a proposal
Tap here to browse the current page
Tap here to browse the current page
Search on the Web: Enter the searched term in the search field at the top of the page. Then tap on “Search” or one of the hidden suggestions. If you don’t want to see suggestions for search terms, select “Settings” > “Safari” > Intelligent Search Field and disable the “Search Suggestion” option.
Show your favorites at the top of the list: Select the favorites in "Settings" > "Safari" > “Favorites”.
Search on a page: Scroll down the list of suggestions and tap on the entry under “On this page”. Tap to show the next occurrence on the page.
Selecting a search engine: Select “Settings” > “Safari” > "Search Engine".

Put fingers on a link to display these options
Put fingers on a link to display these options
Displaying the destination address of a link: Place your finger on a link to display the destination address before opening the link.
Opening a link as a new page: Place your finger on a link and then select “Open to new page”. If you want new pages to open in the background, select “Settings” > “Safari” >“Open links”.
Chapter 7 Safari 50

Viewing open pages: Tap on . Tap or swipe over the page to the left to close a page.

Scroll down to view pages that are open on other devices
Scroll down to view pages that are open on other devices
Showing a last opened page: If you enable Safari in the Settings > iCloud pane, you can view a page that is open on one of your other devices. Tap on this and scroll to the list at the bottom of the page.
Return to the beginning: Tap the area above the search box to return to the top of the page.
Update from Pages: Tap next to the address in the search field to update the content of the current page.

Links in Tweets Links in tweets
Add a bookmark for the current page: Then tap on and then “Bookmarks”. If you want to revisit the page later, tap and then click on the bookmark.
Sorting of bookmarks: If you want to create a bookmark folder, tap on and then “Edit.”
Select the favorites to display when tapping on the search field: Select “Settings” > “Safari” > "Favorites".
Remove the bookmark bar: Select Safari in the Settings > iCloud pane if you want objects that are included on your Mac’s Safari bookmark bar to appear on iPod touch in your favorites.
Creating a Webclip Short Command on the Home screen: Tap on and after that, “To the Home Screen.” The webclip icon will only appear on the device you created it from.
Chapter 7 Safari 51
Bookmarks - Reading list


Sharing with the usual options
Sharing with the usual options
Send/Share a link: Tap on .
Showing sent links: Sign up on Twitter through your iPod touch, tap and select to view links shared by your friends.
Showing a last opened page: To view a page that is open on another device, tap and scroll down the page. To do this, “Settings” > “iCloud” > "Safari" must be enabled.
Automatic Fill-in When you want to log into a website, register for a service or make a purchase, you can type in the information required by using the onscreen keyboard. You can also arrange for Safari to automatically fill in this information for you.
Frequently logging into the same website: Tap “Yes” when you are asked to back up your password. Then, at the next login your username and password are automatically filled in.
Completion of a form: Tap a text box to display the on-screen keyboard. Tap on or above the screen keyboard to move onto each of the next and/or before reaching the field.
Automatic completion: Select “Settings” > “Safari” > Passwords & Autom. fill in and activate the option "Using contact information". After that, tap “Autom” when filling out a form. fill in" above the screen keyboard.
Collecting credit card information: Select “Settings” > “Safari” > "Autom". Complete and collect and secure your credit card information. After that, tap the icon to automatically fill in credit card information (it will be used if necessary). displayed above the screen keyboard) if the insertion point is in a text box for credit card information. The security code of your credit card is not secured – this code you must always enter manually for safety reasons.
Submitting the form: Tap on “Open”, “Search” or the corresponding link on the page.
Chapter 7 Safari 52

The Safari Reader helps you focus on the primary content of a page.
Viewing an article in the reader: Tap the icon on the far left of the address field. If the icon is not displayed, this page cannot be opened in the reader.
Send/Share an article: Tap if you have a page open in the reader to just send out the article text and link on it.
Return to the normal view: Again, tap the “Reader” icon in the address field.
Reading List You can save interesting objects in a reading list to read later. You can also read pages in the reading list if you are not connected to the Internet.

Add the current page to your reading list: Tap on and then “Add to Reading List”.
Add a link page without opening it: Place your finger on a link and then select “Add to reading list”.
Displaying the reading list: Tap on and after.
Delete an object from your reading list: Swipe your finger to the left over the object in the reading list.
Privacy and Security You can adjust your Safari settings to protect your privacy while browsing, as well as block harmful websites.
Safeguarding privacy: Activate the “No Tracking” option in the Settings > Safari section. Safari instructs websites you visit to not log your surfing behavior – however, sites may refuse and ignore this requirement.
Removing unneeded cookies: Select “Settings” > “Safari” > "Block cookies". If you want to remove cookies that are already on your iPod touch, select “Settings” > “Safari” > "Delete Cookies and Data".
Delete web activity and data from your iPod touch: Select “Settings” > “Safari” > "Delete History" and “Settings”> “Saffari” + “Remove Cookies and Data”.
Chapter 7 Safari 53

Visits to websites without their collection in the course of: Tap “Private” on the screen with open pages or in the bookmarks screen. Sites you visit subsequently are not recorded on your iPod touch.
Protection from suspicious websites: Under “Settings” > “Safari”, select the option “Fraud warning”.
Safari settings Select “Settings” > “Safari”. There you have the following options available:
Chapter 7 Safari 54

The proposed stations are an ideal way to discover and enjoy new music from a wide variety of genres. You can also create your own channels based on the artists, titles or genres you choose. For more information, see iTunes Match on page 61.

When you select a station and play back a track, the “You hear” screen displays the album cover and controls for playing. Tap to get more information, create a new channel based on the performer or title, fine-tune it for one transmitter, or send a station. For more information, see AirDrop, iCloud and other sharing options on page 31.
Creating a station based on an artist, genre or title: On the iTunes Radio screen, tap on “New Channel”. Select a genre or search for an artist, title or genre.

Creating your own channel: In the “You hear” screen, tap on “Create.”
Controlling the song selection: Tap on and after that, “Play more such music” or “Never play title again.” You can also add the title to your iTunes wish list.
Switch to the next music track: Tap on . The number of songs you can skip over an hour is limited.
Processing of your stations: Tap on “Edit”. You can then include or exclude other artists, titles or genres and delete a channel.
Buying titles for your own media library: Tap the button with the price.
Sending a self-created transmitter: During playback of the transmitter, tap on and afterwards on “Send Transmitter”.
Advertising-free playback of iTunes Radio: Subscribe to iTunes Match (and turn this option on). For more information, see iTunes Match on page 61.
Buy and import music There are several ways to get music and other audio content on iPod touch:
Chapter 8 Music 56

Search and reproduction Search your music by playlist, performer, title or other categories: Tap on “More” to get additional search options. Tap on a title to play it.
You can listen to audio media through the built-in speakers, via headphones connected to the headphone jack or Bluetooth stereo headphone that is wirelessly connected to iPod touch. When headphones are connected or wirelessly connected, the internal speaker is muted.

Tip to listen
Show more options for scrolling
Show more options for scrolling
Select how to scroll, select how to leaf
Re-arranging keys: You can rearrange the buttons by tapping “More” and after that, “Edit.” Then, drag a button over the one you want to replace.
The “You hear” screen contains information about the currently played title and controls for playback.

Chapter 8 Music 57

Showing the lyrics: Tap the album cover to show lyrics if you have added the lyre for the title before. You can add the lyrics to iTunes on your computer in the “Information” window of the title. After that, you need to sync the title with your iPod touch. (iTunes Match does not support displaying lyrics.)
Jumping to any location in a music track: Move the playback position. You can reduce scrubbing speed by swiping down the screen with your finger.
Random reproduction: On the “You listen” screen, tap on the icon “random”, if you want to play music tracks in random order.
Show all music titles of the album with the currently played song: Tap on . To play a title, tap on it.

Back to the “You hear” screen back to the "you listen" screen
Searching for music: When scrolling, tap the status bar to display the search box at the top of the screen. Then enter the search term. Alternatively, you can search for audio content in the home screen. For more information, see Search on page 28.
Assessing a title to create intelligent playlists in iTunes: Tap the screen to display the rating points. By tapping on one of the points, you can set how many stars you want to award.
Display the audio controls in the lock screen or when using another app: Swipe up from the bottom of your screen to open Control Center. Further information can be found in the Control Centre on page 28.

Current Music Title Current Music title
Play music via AirPlay speakers or Apple TV: Swipe up from the bottom of your screen to open Control Center and tap . More information can be found in AirPlay on page 32.
Chapter 8 Music 58
Album titles album title

Turn the iPod touch to view your album covers.


Swipe left or right to switch to another album. Tap an album to display the songs on it.
Audiobooks The “You Listen” screen displays controls and information for podcasts and audio books when playback starts.
Play the last 15 seconds again Play the final 15 second

Skip 15 seconds to skip 15 sec
Chapter 8 Music 59
Playback speed Playback velocity · Navigation strip navigation strip · playback position Playback position

Playback lists Creating own playlists for sorting music titles: View your playlists and tap on “New Playlist” at the top of the list. After that, enter a title. Tap to add music tracks and videos.

Editing a playlist: Select the playlist and after that select “Edit”.
Empty or delete a playlist created on iPod touch: Select the playlist and tap on “Empty” or “Delete”.
Deleting a title from iPod touch: Tap on “Title”, swipe your finger over the corresponding title and tap on “Delete” afterwards. The title will be deleted from the iPod touch, but not from iTunes library on your Mac or PC or iCloud.
Genius A genius playlist is a collection of music titles from your library that go well together. Genius is a free service that requires an Apple ID to use.
A Genius Mix is a selection of music tracks from the same genre that are re-assembled every time you play back the mix.
Using Genius: Enable Genius in iTunes on your computer and synchro nize iPod touch with iTunes. Genius mixes are synced automatically unless you manage your music manually. Genius playlists can also be synchronized.
Searching for and reproducing Genius mixes: Tap on “Genius” (tap more first if Genius doesn’t appear). Swipe left or right to access your other mixes. Tap to play a mix.
Chapter 8 Music 60

Creating a Genius List: View your playlists, tap on “Genius List” and select a track. Alternatively, you can tap on “Create” in the ‘Listen to’ screen and then tap on the ‘Genius List.
Genius playlists created on iPod touch are copied to your computer when you sync the device with iTunes.
Deleting a secured Genius list: In the playlist, tap on “Delete”.
Siri and voice control You can use Siri or control the music playback with voice control. For more information, see Chapter 4, Siri on page 38 and Voice Control on page 27.
Using Siri or voice control: Press and hold the Home button.
iTunes Match stores your music library in iCloud (including tracks imported from CDs), so you can play your collection on iPod touch and on your other iOS devices and computers. iTunes Match also allows you to listen to iTunes Radio stations ad-free (see iTunes Radio on page 55). iTunes Match is a paid subscription.
Subscribe to iTunes Match in iTunes on your computer: Select Store > Activate iTunes Match and click the Subscribe button.
Once subscribed, iTunes adds your music, playlists and genius mixes to iCloud. Further information can be obtained under www.apple.com/en/itunes/ituntes-match
Chapter 8 Music 61

Activate iTunes Match: Select "Settings" > "Music". When you four iTunes Match akti, synced songs are removed from your iPod touch.
The songs will automatically load onto your iPod touch when you start playing. You can also load music tracks and albums manually when searching. Tap on that.
Note: When iTunes Match is enabled, loaded songs are automatically deleted from your iPod touch when there’s not enough space left with the oldest and longest unplayed track starting to be erased. Next to the removed titles and albums, you will see the iCloud symbol ( ). It is the indication that the titles and album are still available in iCloud, only they are no longer stored locally on your iPod touch.
Removing a title or album: Swipe left and tap on “Delete”.
Limit ads to music tracks loaded from iCloud: Tap on “Settings” > “Music”, and disable the option “All music files”.
Remove iPod touch from the list of “iTunes in the Cloud” devices: Launch iTunes on your computer and select the “Show Account” option in the Store menu. Sign in and click “Manage devices” from the “iTunes in the cloud” area.
Private Sharing The “Private Share” feature allows you to play music, movies and TV shows from the iTunes library on your computer or PC. For this, the iPod touch and computer must be in the same WLAN network.
Play music from your iTunes library on iPod touch: 1 In iTunes on your computer, select “Trayer” > “Advanced” > Activate Private Share. Sign up and click on “Create Private Sharing”.
2 On iPod touch, select “Settings” > “Music,” and log in to Private Sharing using the same Apple ID and password.
3 In “Music” tap on “More” and on “Shared”, then select your media library.
Return to the content on iPod touch: Tap on Shared and select My iPod touch.
Music settings Select Settings > Music to set the options for the Music app. This includes:
Chapter 8 Music 62

The “Late Night” setting causes the dynamic range of audio output to be compressed, so that volume is increased in quiet passages and reduced in loud passages. Use of this setting is recommended for situations where you want to listen to music on an airplane or in another environment with high outside noise levels. (The "Late Night" setting applies to the entire audio output - the audio output of music tracks and videos.)
Setting the maximum volume: Select “Settings” > “Music” > "Maximum Volume".
Note: In some EU countries, iPod touch may alert you that your set volume is above the guidance recommended by the EU hearing protection directives. To set a volume above the guideline, you may need to release the volume control at short notice. If you want to set the maximum volume for your headphones to the guideline, you can select “Settings” > “Music” > "Maximum Volume" and “Max.” Turn on volume (EU)’. Select Settings > General > Restrictions to prevent changes in maximum volume.
Preventing changes to the maximum volume: Select “Settings” > “Music” > "Restrictions" > "Maximum Volume" and select the option “Do not allow changes”.
Chapter 8 Music 63

FaceTime lets you make video or audio calls with other iOS devices or computers that support FaceTime. The FaceTime camera offers the possibility to have conversations “face-to-face”. You can switch to the rear iSight camera (not included on all models) during your conversation, showing what you’re seeing.

Draw the image to any location Drag the image into any location
Mute the call (the caller can see you but cannot hear)
Mute the call (the caller can see you but cannot hear)
Switch to the camera on the back (available for some models)
Switch to the camera on the back (available for some models)
With a Wi-Fi connection and an Apple ID, you can make FaceTime calls and catch emp (to do so log in with your Apple ID or create a new account).

Making and receiving calls Making a FaceTime call: Make sure that FaceTime is enabled under “Settings” > “FaceTime”. Tap on “FaceTime” and then tap on “Contacts.” Then select a name. Tap for a video call or an audio call.
Tap an icon to start a FaceTime call
Tap an icon to start a FaceTime call
Making a call by voice control: Press and hold the Home button, say “FaceTime” followed by the name of the person to be called.
Repeat election: Tap on “Call List” and select a name or number.
Accepting or rejecting a call: When a FaceTime call comes in, you can accept or reject it or choose another option.
Set a reminder to call back A reminder for calling the caller

Send a text message to the caller
Send a text message to the caller
Switching between portrait or landscape format: Rotate the iPod touch to use FaceTime in landscape format. If an unwanted change in orientation is to be avoided, you can lock the iPod touch in portrait format. For more information, change the screen orientation on page 21.
Managing calls Using apps during a call: Press the Home button and tap an app icon. The conversation continues as normal, but the video transmission is interrupted. Tap the green bar at the top of your screen to continue video broadcasting.
Benefits of Favorites: Tap on “Favorites”. You can add a favorite by tapping, selecting a contact and adding it to the “Favorites” as either “FaceTime Audio” or “FiceTime”. Tap a name in the list to call a favorite. Make sure that phone numbers for contacts outside your area include the country code and local area code.
Managing calls: FaceTime calls are not forwarded. If another call comes in while you’re having a conversation through FaceTime, you can either end the ongoing conversation and accept the incoming call, decline the inbound call or answer it with a text message.
Blocking Unwanted Callers: Select “Settings” > “FaceTime” > "Blocked". Blocked callers will not accept phone calls and FaceTime calls, nor text messages. For more information about blocking callers, see support.apple.com/kb/HT5845?viewlocale=en DE
The other options in the Settings pane allow you to, for example, turn FaceTime on or off, set a phone number, Apple ID, or email address that should be used with FaceTime and set call recognition.
Chapter 9 FaceTime 65


Change calendars or accounts Calendars or changes accounts
Show invitations View invitations
Search for events: Tap and enter the text you are looking for in the search field. The titles, participants, locations and notes of the displayed calendar are searched.
Showing a weekly calendar: Turn the iPod touch into landscape format.
Change the text formatting: Tap on a year, month or day to adjust the calendar’s presentation accordingly.
Change an Event: Place your finger on the event and move it to the desired time or adjust it using asset points.
If you have an iCloud, Microsoft Exchange or supported CalDAV account, you can send and receive invitations to meetings.
Inviting participants to an event: Tap an event, then “Edit” and then on “Participant.” Enter names or tap if you want to select people from your contacts.

A reply is requested: Tap an event you were invited to, or tap the entrance box and after that on an invitation. If you added comments that may not be available in all calendar types, those comments are only visible to the organizer but not to other participants. Tap on Calendar and enable Rejected Events if you want rejected events to continue.
Enter an appointment without blocking your schedule: Tap on an event and select “Free” for the Availability setting. If this is an event you created, tap on “Show as” and select “Free.” The appointment will remain on your calendar, but it won’t show up as busy to other people when they send you invitations.

Select which calendars to display
Select which calendars to display
Facebook events in “Settings” > “Facebook”
Facebook events in “Settings” > “Facebook”
Activate iCloud, Google, Exchange or Yahoo! calendars: Tap on “Settings” > “Mail, Contacts, Calendar”, and select an account. Then activate “Calendar”.
Adding a CalDAV account: Tap on “Settings” > “Mail, Contacts, Calendar”, and then add to “Account” and “Other”. Under "Calendar" tap on "Add CalDAV account".
Viewing Facebook Events: Select “Settings” > “Facebook”, log in to your Facebook account and activate the option “Calendar”.
Showing multiple calendars at the same time: Tap on “Calendar” and then select the calendars that you want to display.
Moving an event to another calendar: Tap the event and after that, “Edit.” Then select the calendar in which to move the event.
You can subscribe to calendars that use the format “iCalendar (.ics)”. Supported calendar-based services include iCloud, Yahoo!, Google and the Calendar app in OS X. You can view the events of a subscribed calendar on iPod touch, but you cannot edit them or create new events.
Subscribe to a calendar: Tap on “Settings” > “Mail, Contacts, Calendar”, and then add to “Account”. Select “Other” and then select “Add calendar subscription”. Enter the name of the server and the name for the .ics file you want to subscribe to. You can also subscribe to an iCalendar calendar (.ics) published on the Internet by tapping a link to the calendar.
Chapter 10 Calendar 67


You can share an iCloud calendar with other iCloud users. Other users can only view the shared calendar at first. You can, however, give other users the right to add and change events in their shared calendar. You can also share a read version that all users can view.
Creating an iCloud calendar: In the “iCloud” pane, tap Calendar,” “Edit,” and “Add.”
Share an iCloud calendar: Tap Calendar > Edit and then tap on the iCloud calendar you want to share. Tap Add Person and enter a name or tap to browse your contacts. The selected person will receive an invitation message by e-mail, stating that the calendar is available. In order for the person to accept your invitation, they need their own iCloud account.
Changing access to a shared calendar for a specific person: Tap on “Calendar” > “Edit”, select the shared calendar and tap the person after that. In the following screen, you can authorize the person to make changes in the calendar and send invitation messages for use of the calendar to other people. But you can also unlock the calendar for that person so that contact will no longer be able to access your calendar.
Deactivate the notifications for shared calendars: If a user changes something on a shared calendar, you will be notified of that change. You can deactivate such notifications. To do this, select “Settings” > “Mail, Contacts, Calendar” > "Shared Notes".
Share a read version of a calendar for all users: Tap Calendar > Edit and then tap on the iCloud calendar you want to share. Select the Public Calendar option and tap Share Link to send a copy or URL of your calendar. Any user who uses a compatible app (for example, “calendar” for iOS or OS X) can subscribe to this calendar.
Calendar Settings There are several settings under “Settings” > “Mail, Contacts, Calentimes” that affect your calendar as well as your calendar accounts. This includes:
Chapter 10 Calendar 68

View Photos and Videos With the “Photos” app, you can view your photos and videos:

Type to display in full screen mode
View your photos and videos: Tap on “Photos”. The Photos app automatically sorts your photos and videos by year, collection or moment. You can quickly search the photos in a collection or one year by placing your finger on the corresponding group and then swiping them in each direction.
By default, the Photos app displays a representative cross-section of each photo when searching based on collection or year. If you always want to see all the photos, you need to turn off the “Photo overview” option in the “Settings” section > “Photos & Camera”.

Displays by event or face: Photo albums that you sync with iPhoto 8.0 (iLife ’09) or later, or Aperture 3.0.2 or newer can be displayed sorted by events or faces. Tap on “Albes” and scroll to the “Events” or “Faces” option.
Advertisements by location: Tap on the view by year or collection. For photos and videos containing location information, the information about the place where the respective recording was taken is displayed.
Reduce or increase: Tap the photo twice or pull it on or off with your thumb and a finger. In the enlarged view, you can drag the photo in the desired direction to display other parts of the photograph.
Playing a video: Tap on . Tap the screen twice to switch between full-screen mode and a display scaled up to screen size.
Reproduction of a presentation: As long as you are looking at a photo, tap on and afterwards on “Diashow”. Select the options and tap on “Start Presentation”. To stop the slideshow, tap on the screen. Select Settings > Photos to set other options.
For information about streaming a slideshow or video to a TV set, see AirPlay on page 32.
Sorting images and videos Creating a new album: Tap on “Alben” and then tap it, entering its name. Then tap on “Secure”. Select the photos and videos to add to the album, and tap “Done.”
Adding objects to an existing album: In the view with miniatures, tap on “Select” and select the objects you want. After that, tap on “Add to” and select the album.
Managing Albums: View the list of your albums and tap on “Edit”.
Chapter 11 Photos 70

iCloud Photo Sharing - You can share photos and videos to selected users. Friends you select who have an iCloud account and are using iOS 6 or later, or OS X Mountain Lion or newer can access your stream, view photos that you’ve added, and post comments. If you’re using iOS 7, they can also add their own photos and videos to the stream. You can also post your stream on a publicly accessible website so that any user can view your media.
Activate iCloud Photo Share: Open “Settings” > “iCloud” > "Photos".
Creating a shared stream: If you have a photo or video open net, or selected multiple photos or videos, tap on and after that “iCloud” > “Stream” > New Shared Stream. You can send an invitation as a text message or by email.
Activating a website: Select the shared stream, tap on “People” and activate “Public Website”. Tap on “Share Link” if you want to publicize the website.
Adding objects to a shared stream: View the shared stream and tap . Then select the objects and tap on “Finished”. You can also add a comment by typing the text and tapping “Post.” You can also add objects in Photo or Album view to a shared stream. Tap on , “iCloud” and “Stream”. After that, select the shared stream or create a new stream.
Deleting photos from a shared stream: Select the photo stream, tap on “Select” and select the photos or videos that you want to delete. Then tap on . You must be the owner of the stream or photo.
Deleting comments from a shared stream: Select the photo or video that contains the comment. Place your finger on the comment and after that tap “Delete”. You must be the owner of the stream or comment.
Renaming a Photo Stream: When viewing the shared stream, tap “Edit”. After that, tap the name and enter a new name.
Adding or removing subscribers; disabling or activating messages: Select the photo stream and tap on “Persons”.
Subscribe to a shared stream: In the invitation you received, tap on the “Shares” tab ( ) and after that on “Accept”.
Adding objects to a subscribed shared stream: Show the shared stream and tap . Then select the objects and tap on “Finished”. You can also add a comment by typing the text and tapping “Post.”
Chapter 11 Photos 71

My photostream Automatically view photos taken with iPod touch on your other devices: Activate "My Photo Stream" in the area "Settings" > "Photos & Camera". You can also enable My Photo Stream under Settings > iCloud > Photos.
The photos you take will automatically be added to the “My Photo Stream” stream as soon as you leave the Camera app and connect iPod touch to the Internet via Wi-Fi. All photos in the album “Recording” (including screen pictures and photos from email attachments) will be displayed on your stream.
Also, photos that you add to your Photo Stream on one of your other devices will appear in your Photo stream on iPod touch. On iOS devices, up to 1000 of the photos used or created last can be stored in the “My Photo Stream” stream. On your computer, all photos from "My Photo Stream" can be stored without time limit.
Manage your photostream content: In the album “My Photo Stream” tap on “Select”.
Note: The deleted photos will be removed from your photo stream on all of your devices. The originals remain in the album “Records” on the device from which they originally came. Photos that you back up in another album on a device or computer will not be deleted. To delete photos from My Photo Stream, you need iOS 5.1 (or later) on iPod touch and your other iOS devices. Further information can be found in support.apple.com/kb/HT4486?viewlocale=en DE
Chapter 11 Photos 72

Send photos and videos You can send photos or videos to other users via email and in text messages, send them in a tweet or post on Facebook or Flickr. Videos can be sent by email or text messages and published on YouTube, Facebook and Vimeo. You can also provide photos and videos via the Photo Sharing as described above.

Send or copy a photo or video: Open the appropriate photo or video and tap. If not displayed, tap the screen to view controls.
The size allowed for attachments depends on your service provider. The iPod touch compiles photos and videos when needed.
You can also copy a photo or video and then insert it into an email or text message.
Send or copy several photos or videos: In the “Momente” view, tap on “Send.”
Saving or providing received photos or videos:
When you receive photos and videos in a message or load them from a website, they are automatically backed up to the Recordings album.
Chapter 11 Photos 73

Automatically Improve Automatic Improvement
Red eyes remove red eye
You can edit photos directly on iPod touch. When viewing a photo, tap “Edit” and then click on a tool.
Recovering the original image: Tap the tool again to restore the original image.

Trimming a video: Tap the screen to display the controls. Move the edges of the image view to left or right as desired and tap on “Short”.
Photo settings The photo settings can be found in "Settings" > "Photos & Camera". This includes:
Chapter 11 Photos 74
Turning · Filters · Trimming

Camera at a glance Quick access to the camera: On the lock screen, make a string movement upwards from the icon. You can also swipe up from the bottom of your screen to open Control Center and tap.

With iPod touch, you can shoot photos and videos either with the FaceTime camera on the front or (on some models) with the iSight camera on its back.

The LED flash (models with iSight camera) offers additional lighting if you need it – even as a flashlight. A stroke movement in the control centre is sufficient. Further information can be found at the control centre on page 28.
Set LED flash mode* Set LED Flash mode*
Activate HDR* Enable HDR

Switch between cameras* Change between camera
Recently taken photos and videos Recent photos & videos
*Models with iSight camera*Model with i Sight camera
The Camera app includes various modes that allow you to take still images, square photos, videos and (in models with iSight camera) panoramic shots.
Select a camera mode: Swipe left or right across the screen and select the mode you want (“Video”, “Photo”, “Square” or “Pano”).
Taking a photo: Select “Photos”, tap the shutter button or volume key. The latter is especially useful if you want to shoot in landscape format and stabilize the camera.
A rectangle is briefly superimposed at the point where exposure takes place. When you photograph people, facial recognition spreads exposure to up to 10 faces. Each face is framed by a rectangle.
Chapter 12 Camera 76
Triggers · Filter filter

The exposure is set automatically. However, you can also manually set them for the next shot by tapping an object or area on screen. With an iSight camera, when typing on the screen together with exposure, focus is also set. Face recognition is temporarily deactivated. You can fix the focus and exposure until you tap on the screen again. To do this, touch the screen in the desired place until the rectangle begins to blink.

Taking a panoramic photo: (iSight camera) Select “Pano”, tap the shutter button and slowly move the camera in arrow direction. First, tap the arrow if you want to take the panoramic photo in the opposite direction. If you want to take a panoramic photo in the vertical direction, turn iPod touch into landscape format. You can also reverse direction in a vertical panoramic photo.
Recording a video: Select “Video” and tap the shutter button to start recording and stop (if you type again).
Reduce or increase: (iSight Camera) Pull two fingers on or off the screen.
When location services have been enabled, photos and videos are provided with location information that can be used by apps and websites to provide photographs. Further information can be found in Data Protection on page 34.
Recording a screenshot: Hold the Standby and Home buttons at the same time, letting go of both keys simultaneously. The screenshot is added to the album “Recording”.
Editing photos and shortening videos is possible directly on the iPod touch. For more information, see Editing Photos and Shortening Videos on page 74.
Chapter 12 Camera 77

HDR HDR ("High Dynamic Range") provides you with perfect shots even in situations that have a high contrast effect. For this purpose, three photos are taken with different exposures (long, normal and short) and then the best areas from each of the three photographs are combined into one photo.
Using HDR: (iSight camera) Tap on "HDR". The flash is temporarily deactivated. The best results are achieved if you keep the camera as quiet as possible and the subject to be photographed is not in motion.
Maintain the photos with normal exposure in addition to HDR version: Select “Settings” > “Photos & Camera”.
When viewing the photos in the album “Records”, HDR versions are marked with “HDR” in the corner.
View, Share and Print Recorded photos and videos are backed up in the album “Recording”. If you use My Photo Stream, new photos will also appear in your Photo stream on iPod touch and other iOS devices and computers. For more information see My Photostream on page 72.
Showing the album “Recordings”: Tap the thumbnail and swipe left or right. You can also open the album “Records” in the app “Photos”.
Calling up sharing and printing options: Tap on . For more information, see AirDrop, iCloud and other sharing options.
Loading photos and videos to your computer: Connect iPod touch to your computer to upload objects in iPhoto or other supported programs on your Mac or PC. If you delete photos and videos during this process, they will be removed from the Recordings album.
Syncing Photos and Videos between iPod touch and Mac: For this, use the photo settings in iTunes. For more information, see Syncing with iTunes on page 17.
Camera settings Under “Settings” > “Photos & camera”, you will find the options for the camera, for example:
In the settings for ringing and cue tones under "Settings" > "Tone", you can adjust the volume of the shutter. The “Bing/Off” switch also allows you to mute the sound. (In some countries, the mute function is disabled.)
Chapter 12 Camera 78

You can get up to six cities worldwide the current outside temperatures, weather forecasts for the next 6 days and hourly forecasts of the coming 12 hours. The Weather app uses location services to retrieve the predictions for your current location.

Current Conditions Current Condition
Current temperature - tap to show more info
Current temperature - tap to show more info
Hourly Predicts Showing Hourful Forecasts
Add or delete cities Add or remove cities
Number of cities stored Number of towns
Swipe left or right to view weather data for another city, or tap and select a city from the list. On the screen on the far left, local weather is displayed.
Adding a city or making further changes: Tap on .

Showing the hourly predictions: Swipe your finger left or right over the hourly forecast.

Showing several cities at the same time: Unwind the screen or tap .
Activate and deactivate the local weather indicator: Select “Settings” > “Privacy” > "Location Services". Further information under Data Protection on page 34.
Take the city list to other iOS devices with iCloud: Select Settings > iCloud > Documents & Data and make sure that the "Documents & Data" option is enabled. (The option is enabled by default.) For more information, see iCloud on page 15.
Chapter 13 Weather 80

Watch at a glance The first watch shows the time of where you were when setting up iPod touch. Add different clocks to show the time in other larger cities and time zones.
The clocks are erased or The arrangement can be changed by erasing or changing clocks. Modification of the arrangement

Adding the clock
Display clocks, set alarm clocks and schedule events or timers
Display clocks, set alarm clocks and schedule events or timers

Alarm clock and timer Using the alarm clock: Tap on “Alert Clock” and then tap . Set the time at which the alarm signal should be output, as well as other options and give the alarm clock a name (e.g. “Training”

Set reminders/alert clocks on or off
Set reminders/alert clocks on or off
Stopwatch and timer: With the stopwatch you can take time and record lap times. You can also set a timer that will output a signal after a certain period of time has elapsed. For example, if you’re cooking an egg for yourself, you can ask Siri to set the timer to 3 minutes.
Music or podcast to sleep with: Tap on “Timer” and then tap on “End of Timer,” selecting “Stop Playback” at the bottom of the screen.
Quick access to functions of the watch: Swipe up from the bottom of your screen to open Control Center and tap . The control center also allows you to access the clock’s wake-up signals when iPod touch is locked.
Chapter 14 clock 82

Get directions Get direction descriptions Enter search term Enter Search term

Get more info Seek more information
Tap on pin to unplug info banners
Tap on pin to unplug info banners
Current position
Speed routes Quickly Show Routes Fast
Print or display traffic, report problem or select view
Print or display traffic, report problem or select view
Flyover (3D in standard view) Flyover (3D in default view)
Important: Apps for maps, directions, flyover views and location-based services require data services. These data services are subject to change and may not be available in certain countries or territories. This may result in certain maps, directions, flyover views or location-based information being unavailable, not accurate or not complete. Some functions of maps require location services. Further information under Data Protection on page 34.
Navigate the map by dragging the screen in the desired direction. Use two fingers to make a circular motion on the screen in order to turn the card in another direction. Tap the compass at the top right to realign the map north.
Show current location · View current location

Reduce or increase: Tap twice with one finger to zoom in, and once with two fingers to zoomed out. You can also simply put your thumb and fingers on or off. When zooming, a scale is displayed on the upper left. Under “Settings” > “Maps”, you can set whether distances are displayed in kilometers or miles.
There are several ways to search for a place on the map:
You can also, if the Map app makes a suggestion during search input, tap on one of the locations in the list under the Search field.
Find the location of a contact or bookmark from the last search: Tap on .
Change of View: Tap and select “Standard”, “Hybrid” or “Satellite”.
Manual marking of a location: Touch the screen until the pin is displayed.
Retrieval of information Getting information about a place: Tap a pin to unplug the information banner. Then tap . The information displayed can include Yelp reviews and photos, the link to a web page, directions, and more.
Retrieving directions: Tap on and after. Enter the starting and destination locations, and tap on “Route”. You can also select a location or route from the displayed list if available. When multiple routes are displayed, tap the route to use. Tap on “Start” and swipe your finger to the left to display the next statement.
Get the directions from your current location: Tap on the information banner of your destination. If you are walking, set the settings for directions under "Settings" > "Map" to "Foot".
Retrieve footpath descriptions: Tap on and after. Enter the starting and destination locations, and tap on “Route”. You can also select a location or route from the displayed list if available. Tap on “Start” and swipe your finger to the left to display the next statement.
Chapter 15 Cards 84

Get directions by public transport: Tap on and after. Enter the starting and destination locations, and tap on “Route”. You can also select a location or route from the displayed list if available. Load and open the public transport apps you want to use.
Display of traffic information: Tap on and then “Traffic”. An orange marker indicates a point where traffic flows more slowly. A red marker indicates a point with stop-and-go traffic. Tap such a marker to call the traffic message.
Sending a problem report: Tap on and then “Report problem”.
3D and Flyover Views Many cities and places around the world can be represented three-dimensionally in either the 3D view or the flyover view. Zoom in on the map until the button or one is blinded. Tap the button. Alternatively, you can push up with two fingers. You can toggle between the 3D and flyover views when you tap.
Adjusting the Camera Angle: Swipe up or down with two fingers.

The Transamerica Pyramid Building is a registered service mark of the Transamersica Corporation. The Transamerica Pyramid Building is a registered service mark of the Transamersica Corporation.
Set the settings for "Cards" Select "Settings" > "Cardies". The settings include:
Chapter 15 Cards 85

Add to the media library Add to your media library

Delete videos from the media library Delete video from the Media Library
Tap a video to play it Tap a Video to Play It
Select Category Choose Categorize
Watching a video: Tap the video in the video list.
Watch videos taken with iPod touch: Open the “Photos” app.
Choose between streaming and loading: If the miniature of a video shows you the icon, you can watch it without loading it as long as iPod touch is connected to the Internet. If you want to load the video onto iPod touch so that you can watch it even when there is no Wi-Fi connection to the Internet, you need to tap in the detailed information for the video.
Search for podcasts or iTunes U videos: Download the free Podcasts app or iTunes U app from App Store.
Set a timer for sleep mode: In the app “Clock” tap on “Timer”, and by swiping your finger, set the desired hours and minutes. Tap on "Timer End" and select "Stop Playback". Then tap on “Set” and “Start”.

Adding Videos to Your Media Library Buy or borrow videos from the iTunes Store: On iPod touch, tap Store in the Video app or open the iTunes Store app and tap Videos. For more information, see Chapter 22, iTunes Store on page 99. Videos you purchase using your iTunes account are available on iPod touch in the Video app, regardless of which iOS device or computer you’re purchasing from. The iTunes Store is not available in all countries and regions.
Transfer videos from your computer: Connect the iPod touch to your computer and sync videos in iTunes on your computer. For more information, see Synchronizing with iTunes on page 17.
Streaming videos from your computer: Enable Private Sharing in iTunes on your computer. On iPod touch, select Settings > Videos and enter the Apple ID and password you have set for private sharing on your computer. Open the Video app on iPod touch and tap Shared at the top of the video list.
Converting a video to play on iPod touch: If you see a message when adding a video from iTunes to iPod touch that the video cannot play on iPod touch, you can convert it. Select the video in your iTunes library and select “Trayer” > “Create new working copy” > "Creating version for iPod or iPhone". Then transfer the converted video to iPod touch.
Deleting a video: Tap Edit on the top right of your collection screen. To delete a single episode of a series in the “Episode” list, swipe over the episode you want to delete. If you delete a video (unless it is a rental movie) from your iPod touch, it will not be erased from your iTunes library on your computer. This means that you can transfer it back to your iPod touch at a later time via synchronization. If you do not want to transfer the video back to iPod touch via synchronization, in iTunes you must disable syncing for the video. For more information, see Synchronizing with iTunes on page 17.
Chapter 16 Videos 87

Move to jump back or forward
Move to jump back or forward

Move to adjust the volume
Move to adjust the volume
Show on a TV with Apple TV
Show on a TV with Apple TV
Select between full screen mode and a video display scaled to the size of the screen: Tap or . By double-tapting, you can scale the video without displaying the controls. If the scale controls are not displayed, this means that the video is already scalable to match the screen.
Re-reproducing from the beginning: Drag the playback position on the navigation bar to the far left if the video contains individual chapters. Tap if there are no chapters.
Jump to the next or previous chapter: Tap or . You can also use the center button or a functionally equivalent key of a compatible headset. Press the button twice to get to the next chapter, or three times if you want to return to the previous chapter.
Fast forward/fast return: Put your finger on or .
Selecting another audio language: If there are other languages available for the video, tap and select a language from the “Audio” list.
Displaying subtitles and extended subtitle: Tap on . Not all videos are designed for subtitles or extended subtitle.
Adjust the presentation of extended subtitles: Select “Settings” > “General” > "Use aids" > “Subtitles and extended subtitles”.
Displaying subtitles and extended subtitle for the deaf or hearing impaired: Select Settings > General > Control Aids > Subtitles and Extended Captions, and select Advanced Subtitle + SDH.
Watching a video on a TV: Tap on . More information about AirPlay and other connection options can be found in AirPlay on page 32.
Settings for videos Select “Settings” > “Video”. There you have the following options available:
Chapter 16 Videos 88

Notes that you create on your iPod touch are made available via iCloud on your other iOS devices and Mac computers. You can also read and create notes in other accounts (for example, Gmail or Yahoo!).

Type to edit
Write a new note
Delete this note delete this
Release or print release or print
Viewing your notes on other devices: If you have an email address of type “icloud”. com, ’me.com‘ or’mac.com“Use for iCloud”, select Settings > “iCloud” and enable the Notes option. If you are using Gmail or another IMAP account for iCloud, select Settings > Mail, Contacts, Calendar and enable Notes option on the account. Your notes will appear on all other iOS devices and Mac computers that use the same Apple ID.
Deleting a Note: In the list of notes, swipe your finger to the left over the note.
Looking for a note: Scroll up the list of notes (or tap on the top screen area) to display the search box. Then tap the field and enter the search term. You can also search for notes directly on the home screen – tap around the middle of the screen and move your finger down.
Providing or printing: Tap on the bottom of the screen. You can provide notes as a text or email message, or via AirDrop.

Using Notes in Multiple Accounts Share notes with other accounts: You can take notes for other accounts like Google, Yahoo! Or release AOL. Select “Settings” > “Mail, Contacts, Calendar”, and activate the option “Notes” for your account. If you want to create a note about a specific account, tap “Accounts” above the list of notes, select your desired account and tap on “New”. Notes that you create in the account on iPod touch will appear in this account’s note folder.
Set the default account for new notes: Select “Settings” > “Notes”.
View all notes in an account: Tap “Accounts” at the top of your list of notes and select an account.
Chapter 17 Notes 90

The “Reminders” app helps you to keep track of upcoming appointments and tasks.

Planned Objects Scheduled objects
Add a list add a list
Closed object Closure object
Adding a reminder: Tap on a list first, and then on a blank line. You can choose which of your mail, contact and calendar accounts will store the reminder in.
Deleting a list: As long as a list appears, tap “Edit” and then “Delete List.”
Deleting a Reminder: Swipe left over the reminder and tap on “Delete.”
Change the order of lists: Put your finger on the name of the list and drag it to another location. Tap Edit to change the order of objects in a list.
Searching through lists: Scroll to the top of the list to view the search field. All lists are searched for the name of memory. You can also use Siri to search for reminders. For example, you can say: “Seek the memory about milk”.
Deactivating messages: In the “Settings” > “Notifications” section, you can deactivate notifications for the Reminders app. Select the Do Not Disturb option to temporarily mute messages.

Schedule-bound reminders Notify you at the specified time.

Planned Memory Scheduled memory
Displaying all scheduled reminders: Tap to view the list of appointment-bound reminders.
Deactivating messages: In the “Settings” > “Notifications” section, you can deactivate notifications for the Reminders app. Select the Do Not Disturb option to temporarily mute messages.
Settings for memories Set the alert tone for notifications: Select “Settings” > “Tones”.
Continuous updating of reminders on other devices: Select Settings > iCloud and select Reminders. To keep you up to date with reminders on a Mac running OS X, iCloud must also be enabled on that Mac. Some other account types (for example Exchange) also support reminders. Select Settings > Mail, Contacts, Calendar and select Reminders for the accounts you want to use.
Setting a standard list for new reminders: Select “Settings” > “Reminders”.
Chapter 18 Memories 92

Stay informed about developments on the largest stock exchanges and your equity portfolio, see changes in securities’ value and receive up-to-date news of companies you are interested in.

Move left or right to view statistics or new articles
Move left or right to view statistics or new articles
Manage your stock list: Tap on .
You can also view your shares on the “Today” tab in the messaging center. Further information can be found in the communication centre on page 30.

Add a news article to the reading list: Place your finger on the headline of the news article and select “Add to reading list”.
More information: Tap on .
Displaying a diagram in full screen mode: Turn the iPod touch to use landscape format. Swipe left or right to show more diagrams.


Continuous update of the stock list on your iOS devices with iCloud: Select Settings > iCloud > Documents & Data and select the “Documents & data” option. (The option is enabled by default.) More information on iCloud, page 15.
Chapter 19 Shares 94

Game Center at a Glance In Game Center you can find games that you can play together with friends who have an iOS device or Mac (with OS X Mountain Lion) or newer. You must be connected to the Internet in order for you to use Game Center.

Play, share or remove games
Play, share or remove games
Show leader list View leader list
Search for teammates
Goals of the game Explore goals of the play Exploring objectives of the match
Choose game Selection Game
Here we go! Here we go!
Is it your turn? Is it your turn?
Invite friends to a game invite friends to the game
Write status or change photo Status or change photograph
First steps: Open the Game Center. If your short name is displayed at the top of the screen, you are already logged in. Otherwise, you will be prompted to enter your Apple ID and password.
Searching for games: Tap on “Games” and then select a recommended game. Alternatively, you can also search for games from the App Store (check in game description to see if it is supported in Game Center). You can also refer a game that has a friend. For more information, see Games with Friends on page 96.

Deregistration: It is not really necessary to log out when leaving the Game Center. Of course, you can still do this by selecting “Settings” > “Game Center”, and then tapping your Apple ID.
Playing with friends Invite friends to a multiplayer game: Tap on “Friends”, select the friend’s name and a game, and tap on “Play.” If more players are allowed or required in the game, you can select and invite additional players. Then tap on “Continue”. Enter your invitation and send it. Wait until the others accept the invitation. When everyone is ready, you can start the game. If a friend is unavailable or doesn’t respond to the invitation, you can tap “Auto Match” so Game Center will search for your teammate. You can also tap on “Invite” to invite another person.
Sending a request to a friend: Tap on “Friends” and after that. Enter a friend’s email address or their Game Center short name. Tap to scroll through your contacts. Tap “Back” for each address if you want to send a request to several friends. You can also select any contact in the Friends section under A-Z, Last or Points, or any player that appears elsewhere on Game Center.
Challenge friends to trump you: First tap on a score or scores and then “challenge friends.”
Showing the game played by a friend and his score: Tap on “Friends”, a friend’s name, and then tap on “Games” or “Points”.
Finding new friends: You can view a friend’s list of friends by tapping on “Friends”, the name of the friend, and after that on “friends”.
Keeping your email address secret: In the Game Center settings for your account, disable the option "Public Profile". More information under “Game Center Settings” below.
Activate or disable multiplayer modes or requests from friends: Select “Settings” > “General” > "Restrictions". Before that, tap “Enable Restrictions” (top of the screen) when these options appear in gray.
Chapter 20 Game Center 96

Game Center Settings Tap on “Settings” > “Game Center”. There you have the following options available:
Set the type of notifications for Game Center: Select “Settings” > “Communications” > "Game Center". Activate notifications if the Game Center does not appear.
Changing the Game Center restrictions: Select “Settings” > “General” > "Restrictions".
Chapter 20 Game Center 97

Newspaper Skisk at a Glance In the newsstand, your magazine and newspaper apps are managed and automatically updated when your iPod touch has Wi-Fi connection to the Internet.

Place fingers on a magazine/newspaper to rearrange the object
Place fingers on a magazine/newspaper to rearrange the object
Newspaper kiosk apps find newsagent kiosks apps
Searching for apps for newspaper kiosk: Tap on “Zeitungskiosk” to display the shelf, and after that select “Store”. When you buy a new app for the newsstand, it will be added to the shelf. Open the app after it loads to view the various issues and subscription options. Subscriptions are app-internal purchases that are billed through your store account.
Disable automatic updates: Apps are automatically updated over Wi-Fi unless you disable the “Automatic Downloads” option in Settings > iTunes & App Store.

iTunes Store at a glance The iTunes store lets you play your iPod touch with music, movies and TV shows.

Show your history View your history
View downloads, purchases, sounds, audiobooks and more
View downloads, purchases, sounds, audiobooks and more
Searches Search by genre: Tap on a category (music, movies, TV shows). Tap on “Genres” to filter the list.

Tap on a genre to show more
Tap on a genre to show more
Targeted search: Tap on “Search”, enter the desired text in the search field and tap again on “search”.
Leaves

Discover new music with iTunes Radio: If you listen to music on iTunes Radio and a song is played that you like, then you can connect to the iTunes Store to purchase the track. You can also add it to your wish list or use it as a starting point for searching for similar music. For more information, see iTunes Radio on page 55.
Open a preview for a music track or video: Tap on it.
Re-arranging keys: Tap on “More” and then “Edit” if you want to change the arrangement of buttons. To replace a button, drag another icon onto the symbol that you want to replace. Tap on “Done.”

Buy, borrow or redeem vouchers Tap on the price of an object (or in the “free” section. After that, tap again to buy it. If it shows instead of a price, you have already purchased the object and can reload it for free.
Redeeming a gift card or code: Tap on a category (for example, “Music”), scroll down and tap on “Redeem.” If you want to send an object as a gift, show the object and tap on and after that “Gift”.
Display of the load progress: Tap on “More” and then tap on “Downloads.”
Loading of other equipment: Select Settings > iTunes & App Store to set up Automatic Downloads on your iPod touch. Tap “More” and then tap “Bought Items” to see which songs, movies, and TV shows you’ve purchased from the iTunes Store.
Renting films: In some countries, you can rent films. You have 30 days to start playing the rented movie. After you have started playback, you can watch the movie as often as you want within the given time (24 hours in the US iTunes Store, 48 hours in other countries). After this period, the film will be deleted. Film rentals cannot be transferred to another device. However, you can use AirPlay and Apple TV to play a rental movie on the television.
Chapter 22 iTunes Store 100

Settings of the iTunes Store Options for the iTunes store can be set under “Settings” > “iTunes & App Store”. They shall have the following possibilities:
Viewing and editing your account: Tap your Apple ID and then “Show Apple ID.” To change your password, tap the “Apple ID” field.
Signing in with another Apple ID: Tap on the name of your account and after that, “Log out”. Then you can enter another Apple ID.
Activate and disable the “iTunes Match” option: Tap “iTunes Match” if you want to subscribe to the service that stores your music in iCloud so you can access it from anywhere.
Deactivate automatic downloads: Tap on “Music”, “Books” or “Updates”. Content is automatically updated via Wi-Fi unless you disable the appropriate option in the “Automatic Downloads” section.
Chapter 22 iTunes Store 101

App Store at a glance In the app store, you can find out about apps for iPod touch and buy and download apps.

Show wish list View wish list
View purchases and updates Show purchases & updates
Sheets Find apps that are used nearby Find apps which are used near
When you first open the App Store, you’ll be prompted to load some recommended and free apps from Apple such as “iBooks”, “iTunes U”, “Podcasts”,” Find Friends” and “Find My iPhone”.
Search for Apps Targeted search: Tap Search and type in the text you’re looking for, or tap Categories to search for specific types of apps.
Recommendation to friends: Search for the app, tap and select the method. For more information, see AirDrop, iCloud and other sharing options on page 31.
Using a wish list: You can reserve apps for a later purchase. To do this, tap on the app page and after that “Add to Wish List”.

Location-based search for apps: Tap “Nearby” to find out which apps are particularly popular with users near you. (For this purpose, the option “location services” must be activated under “Settings” > “Privacy”.) This is useful for example in museums, at sports events or when travelling to make what you have experienced even more unforgettable.

Tap to Store or Buy
Buy, redeem gift cards and download Tap on the price of an app (or rather.) in the “free” section. After that, tap on “Buy” to buy them. In the case of a free app, tap.
If it shows instead of a price, you have already purchased the app and can reload it for free. As long as the app is loaded or updated, its icon will appear on the Home screen along with a status bar.
Redeeming a gift card or code: Tap on “Highlights”, scroll down the screen and tap on “Redeem”.
Sending a gift: Display the object you want to give away and tap on, and after that “Gift.”
Restricting in-app purchases: Many apps offer the option to purchase additional content or extensions for a fee. You can restrict purchases made within an app. To do this, select “Settings” > “General” > "Restrictions" (make sure that “Restricts” is enabled) and turn off the option of “In-App Purchases”. For more information, see Restrictions on page 33.
Deleting an App: In the Home screen, place your finger on the app icon until it starts to wobble and tap after that. Press the Home button when you are done. Pre-installed apps cannot be deleted. Together with the app, all associated data is also deleted. An app you purchased from the App Store can be reloaded at any time free of charge.
More information about the final deletion of all apps, data and settings can be found in Restart or Restart. Reset the iPod touch to page 146.
Chapter 23 App Store 103

You can set App Store Options settings under “Settings” > “iTunes & App Store”. They shall have the following possibilities:
Viewing and editing your account: Tap your Apple ID and then “Show Apple ID.” To change your password, tap the “Apple ID” field.
Signing in with another Apple ID: Tap on the name of your account and after that, “Log out”. Then enter another Apple ID.
Deactivate automatic downloads: Tap on “Apps” in the section “Automatic Downloads”. Apps are automatically updated over Wi-Fi unless you disable the option in the “Automatic Downloads” section.
Chapter 23 App Store 104

Passbook at a glance With Passbook boarding cards, movie tickets, coupons, customer cards and other cards are always available in one central place. Scan the desired pass on iPod touch to check in for a flight, go to the movies or redeem a coupon. These cards may contain important information such as the remaining balance of a gift card, the validity period of a coupon or your seat number for a concert.

Tap on a Pass to display it
Tap on a Pass to display it
Passbook for on the go Search for apps that support Passbook: In the welcome screen, tap on “Apps for Passbook” or visit the website www.itunes.com/passbookapps Maps can be accessed from apps, emails or News or from websites are added when you make a purchase, or receive a coupon or voucher. Normally, it is sufficient to tap or click on a card or the link to a map in order to add it to Passbook. You can also scan codes of invoices that are then loaded into Passbook.
Using a card: If a message appears on the lock screen, swipe it to the side to display the card. Alternatively, you can also open the Passbook and select your card and have its barcode read by the scanner.

Sending a card: You can deploy a card as text or email messages, or via AirDrop. For more information, see AirDrop, iCloud and other sharing options on page 31.
Location-based display of maps: Some maps are location-based and can be displayed at a certain time or at a specific location on the lock screen, e.g. B. when arriving at the airport before a flight. For this purpose, the option "location services" must be activated under "Settings" > "Privacy".
Re-ordering a card: Move a card in the list to move it elsewhere. The new arrangement will be updated on all iOS 7 devices.
Updating a Card: Usually, maps are updated automatically. To update a card manually, tap and drag the map down.
Delete a card: Tap on the map, and afterwards “Delete”.
Settings for Passbook Preventing the display of cards on the lock screen: Tap on “Settings”, select “General” > “Code lock”. After that, deactivate “Passbook” in the area “Allow access when locked”. If you want to prevent a specific card from appearing on the lock screen for cards that are sent messages, tap and disable the “In Lock Screen” option.
Determine the messaging options: Select “Settings” > “Messages” + “Passbook”.
Including cards on other iOS devices: Select Settings > iCloud and select Passbook.
Chapter 24 Passbook 106


Open in messages
Open in Mail
Setting up the My Info map for Safari, Siri and other apps: Tap on “Settings” > “Mail, Contacts, Calendar”, and on “My Info”. Select the card with your name and information.
Defining affiliations between contacts: On your contact card, use the “Assigned Name” fields to enter your relationships with other people Siri should know so that you can e.g. B. They say, “Send a message to my sister.”
Looking for a contact: Tap the search field at the top of the contacts list and enter a search term. You can also search your contacts via Spotlight Search (see Find on page 28).

Sending a contact: Tap on a contact and then “Send Contact.” For more information, see AirDrop, iCloud and other sharing options on page 31.

Change of a label: Tap Edit if a field has an incorrect label (for example, "Private" instead of "Work"). After that, tap the label and select a new one from the list or tap on “Own field” to create your own label.
Deleting a contact: Select the contact’s card and tap “Edit”. Scroll down and tap on “Delete contact.”
Adding contacts In addition to adding contacts, you can also take other actions:
Searching a directory: Tap on “Groups” and then tap the GAL, CardDAV or LDAP directory to search. Then enter the search term. Tap “Add contact” to save the information in your contacts.
In or out of a group: Tap on “Groups” and select the groups you want to see. This button will only appear if your contacts are from different sources.
Chapter 25 Contact details 108

If you use contacts from multiple sources, there may be several entries for the same person. To prevent multiple entries from appearing in the All Contacts list, you can link contacts from different sources with the same name and as individual Unified contact Display. When you display such a contact, “Together” appears as the title.
Unifying contacts: If two entries for the same person are not automatically linked. You can manually unify the entries. Open one of the contact’s cards and tap “Edit.” After that, tap on “Link contact” and select the contact entry to which you want to link.
Linked contacts are not merged. If you have changed or added information in a unified contact, these changes will be copied to each source account where they already exist.
If you link contacts with different first or last names, then each card’s name will not change. However, only one name is displayed on the unified map. If you want to select which name is displayed on a unified card, tap “Edit”, then click on the linked card with the desired name and then touch on “Name for gem”. Use the card.
Settings for Contacts Tap on “Settings” > “Mail, contacts, calendar.” There you have the following options available:
Chapter 25 Contact details 109

With the app for voice memos, you can use iPod touch as a mobile dictation device. Use the built-in microphone or a supported headset. an external microphone.

Start, stop or continue recording
Start, stop or continue recording
Stop and secure recording
Your recordings your
Starting a recording: Alternatively, tap or press the middle button on the headset. Tap again to pause or resume recording. Tap on “Ready” to secure the recording.
Recordings with the integrated microphone are mono recordings. Stereo recordings can be created when you connect an external microphone that is compatible with the port for iPod touch headset, with Lightning port. Look for accessories that carry the “Made for iPod” or “Works with iPod” logo.
Adjustment of the recording level: You can vary the recording level by changing the distance of the microphone from the noise source. For a good quality recording, the loudest level should be in the range between –3 dB and 0 dB.
Muting of the start and stop signal: Use the volume buttons on iPod touch to take back the volume altogether.
Recording level Recording levels

Multitask: If you want to use another app during recording, press the Home button and open the other app. Tap the red bar at the top of your screen to go back to “Voice Memos.”
Listening to a recording: Tap on a recording in the list and after that. Tap to stop the memo.
Tap a video to re-admit or edit it Tap a Video to rejoin or fold

Move to jump back or forward
Move to jump back or forward
Then, the boots are closed or renamed.
Listen to recordings listening
Shortening a recording: Tap the recording and after that “Edit” and drag the red markings for start and end in the desired direction. Tap to listen to the recording. After you make your changes, tap “Cut” to back up the edited recording. The trimmed parts are finally deleted.
Moving recordings to your computer voice memos can be synced with the iTunes library on your computer. So you have the option to listen to them on your computer or sync them with another iPhone or iPod touch.
If you delete a synced memo from iTunes, it will remain on the device where it was created. However, it is removed from all other devices. If a synchronized memo is deleted from the iPod touch, it will be copied back to your device next time you synchronize the iPod Touch. However, this copy cannot be copied back to iTunes a second time.
Synchronize voice memos with iTunes: Connect the iPod touch to your computer. Then select “iPod touch” in iTunes. Select “Music” at the top of the screen, select “Sync Music,” click “Include Speech Memos,” and then choose “Apply.”
Voice memos synchronized by iPod touch are displayed in the music list and in the “Voice Memos” list in iTunes. Computer-synchronized voice memos appear in the “Voice Memos” app on iPod touch, but not in the Music app.
Chapter 26 Language memos 111

With this app, you can add, subtract, multiply and divide just like with a standard calculator.
Quick access to the calculator: Swipe up from the bottom of your screen to open Control Center.

Display blank
You need to turn the iPod touch into landscape format in order to use the scientific calculator.


Nike + iPod at a glance In conjunction with the (sold separately) “Nike + iPod” sensor, during one workout session the app gives you audio feedback about your speed, distance traveled, time spent and number of calories consumed.
The Nike + iPod app will only appear on the Home screen when you activate it.
Activate Nike + iPod: Select “Settings” > “Nike + iPod”.

Select type of training Choose type of workout
Calibrate device according to your last workouts
Calibrate device according to your last workouts
Create or select your own training
Create or select your own training
Select standard training Choose standard training
Watch training history View training history

Nike + iPod gets the training data from a wireless sensor (available separately) that you attach to your shoe. Before you use it for the first time, you need to connect the sensor with your iPod touch.
Connecting the iPod touch to your shoe: To connect the sensor to your iPod touch, attach it to your shoe and open “Settings” > “Nike + iPod” > "Sensor".
Calibration of “Nike + iPod”: Record a workout over a known distance of at least 400 meters to calibrate the “Nike + iPod” function. After that, tap on “Finish training”, select the “Calibrate” on the screen with the Training Summary and enter the distance traveled.
Resetting the settings: Select Settings > Nike + iPod to restore the pre-set calibration.
Starting a training: Start a training by tapping on “Trainings” and selecting one.
Interruption of training: If you want to pause the workout for a moment, pick up iPod touch and tap on the lock screen. Tap if you want to continue.
Finishing the training: At the end of your training, finish iPod touch standby mode by tapping “End Training” on and after.
Sending the training data: You can provide your training data nikeplus.com send. Open “Nike + iPod”, tap on “Overview” and then click on “Send to Nike+ website”. (For this, you must be connected to the Internet.)
Show your progress: You can put your sporting achievements on nikeplus.com Display. Open Safari, log in to your account nikeplus.com Follow the instructions and follow them.
Settings of "Nike + iPod" Select "Settings" > "Nik + iPod", where you can use the following settings:
Chapter 28 Nike + iPod 114

Operating aids
Activation of the operating aids: Select “Settings” > “General” > "Operating aids" or use the short command for operating aids. For more information, see the short command below.
Activate the operating aids with iTunes: Connect the iPod touch to your computer and select “iPod touch” from iTunes’s device list. Click on “Overview” > “Options”, and then click on “Configure control aids”.
For more information on the iPod touch controls, see www.apple.com/en/accessibility
Annex III

Short command for operating aids Using the short command for operating aids: Press the Home button three times in a row if you want to turn one of the following functions on or off:
Selecting the functions to be controlled: Select “Settings” > “General” > "Operating aids" > "Operational aid short command", and select the desired operating aids.
Reducing the click speed: Select “Settings” > “General” > "Use Aids" > “Click Speed” if you want to lower the click speed for your Home button.
VoiceOver reads what is displayed on the screen. So you can use the iPod touch benut zen without seeing it.
VoiceOver will read you the available information for each object selected on screen. The VoiceOver cursor (a black rectangle) encloses the object whose name or description reads out VoiceOvers.
Touch the screen or move a finger across the screen to hear information about the various objects on the screen. When you select text, VoiceOver reads the text aloud. If the “Read Entry Aloud” option is activated, VoiceOver will either read out the object’s name or provide instructions for how to proceed – e.g. B. “Double-tap to open object.” Use the gestures described in Learning VoiceOver Gestures on page 120 to interact with objects such as buttons and links.
VoiceOver informs you with an acoustic signal about every screen change. When changing, VoiceOver selects the first object in the new screen and reads its name or short description aloud. (Normally, this is the object in the upper left corner of a screen.) VoiceOver also lets you know when it changes from portrait to landscape (or vice versa), and when a screen is locked and unlocked again.
Annex A Operating aids 116

Activate or disable VoiceOver: Select “Settings” > “General” > "Operating aids" > "VoiceOver", or use the short command for operating aids. For more information, see the short command on page 116.
Explore the screen: Move your finger across the screen. VoiceOver reads to you every object that you touch. When you raise your finger, the last object remains selected.
Annex A Operating aids 117

Using a larger VoiceOver cursor: Select “Settings” > “General” > "Use aids" > “VoiceOver” > Great Cursor.
Adjusting the Read-Audience Voice: You can adjust the characteristics of VoiceOver read-out voice so that it is easier for you to understand.
Using iPod touch with VoiceOver Unlocking the iPod touch: Press the Home or Standby button, swipe across the screen to select the Unlock slider and double-tap on the screen.
Enter the code without reading it out: Use the handwriting function to avoid reading it when entering the code. For more information, see Writing with your finger on page 123.
Annex A Operating aids 118

Opening an app, switching a switch or “tap” to an object: Select the object and double-tap on the screen.
“Double-tap” on a selected object: Tap the screen three times.
Adjusting a slider: Select the slider and then swipe up or down with one finger.
Using a standard gesture: Double-tap and keep your finger on the screen until you hear three rising signals. Then make your gesture. When you raise your finger, the VoiceOver gestures are used again.
Scrolling through a list or area of the screen: Swipe up or down with three fingers.
Opening of the message centre: Select an object in the status bar and swipe down over the screen with three fingers. You can hide the message center with a zigzag gesture (that is, by moving two fingers back and forth three times as you would when writing a “z”).
Opening of the control centre: Select an object in the status bar and swipe upwards across the screen with three fingers. You can revoke this requirement with a zigzag gesture.
Switching between apps: Press the Home button twice to see which apps are currently running, and after that swipe left or right to select an app and open it by tapping. You can also set the rotor to “Actions” while you see open apps and swipe it up or down afterward.
Re-arrange the home screen: Select an icon on the Home screen, double-tap it, leave your finger on it and move to the new position you want. Raise your finger when the object is at its target position. Move an icon to the side screen edge if you want to place it in another home screen. You can select and move objects until you press the Home button.
Speaking of iPod touch status information: Tap the status bar at the top of the screen and swipe left or right to get information about time, battery status, Wi-Fi signal strength etc. to be read out.
Annex A Operating aids 119

Reading out communications: Select “Settings” > “General” > "Use aids" > “VoiceOver”, and select the option to read messages aloud. Notifications (including the content of text messages received) will be sent immediately upon your appearance or It is read to their reception even if the iPod touch is locked at this time. Unreceived messages are repeated when unlocking the iPod touch.
Activation or deactivation of the screen curtain: Tap three times with three fingers. When the screen curtain is enabled, the contents of the screen are active even though the screen is turned off.
Learning VoiceOver Gestures As long as VoiceOver is on, the standard gestures will cause other actions. In addition, in this case you can use additional gestures to navigate on the screen and control individual objects. VoiceOver gestures can include typing and swiping with two, three or four fingers. Optimal results when using gestures with two and three fingers are achieved if you move the fingers relaxed and only spread slightly on screen.
VoiceOver gestures can be executed in several ways. For example, you can use two fingers of the same hand for typing with two finger or alternatively one finger each from the right and left hands. You can also use the thumbs for this. Many users find the gesture of “shared typing” helpful: instead of selecting an object by double-tapping, you can tap on one object with a finger and on the screen with a second finger. Test the different ways to see which course of action is best for you.
Test the different ways to see which course of action is best for you. Try to execute the movement faster if a gesture doesn’t work. This is especially true for gestures with double-tapes and swipes. For swiping, quickly move one or more fingers across the screen.
In VoiceOver settings, there is a special section where you can practice the VoiceOvers gestures without affecting your iPod touch and its settings.
Practicing VoiceOver gestures: Open the “Settings” > “General” > "Operating aids" > “VoiceOver”. Then tap on “VoiceOver Exercises”. Then, tap on “Done.” Make sure VoiceOver is enabled if the “VoiceOver Exercises” button does not appear.
Below you will find an overview of important VoiceOver gestures:
Annex A Operating aids 120
Navigating and reading

Using the VoiceOver rotor With the rotor control, you can set what will swipe up or down as long as VoiceOver is activated.
Operation of the rotor: Place two fingers on the iPod touch screen and turn your hand.
Select the options for rotor: Select “Settings” > General > Control Aids > VoiceOver > Rotor and then select the options that you want to have available in rotor.
Annex A Operating aids 121
Activation

Which rotor settings and associated effects are available depends on what you’re doing. For example, if you have the text of a received e-mail read out to yourself, you can use the rotor to set the swipe up or down to change from wordwise to characterwise (and vice versa). When you browse a web page, the rotor allows you to set your sights on hearing all text (word for word or character for sign) or jumping to the next object of the same type. B. a heading or link.
If you control VoiceOver with an Apple Wireless Keyboard, the rotor can be used to set up settings such as volume, speaking speed, pitch or voice. specify the phonetics, reproduction of the entered text and reading punctuation marks. For more information, see Using VoiceOver with an Apple Wireless Keyboard on page 126.
Using the Screen Keyboard When you select an editable text box, the on-screen keyboard will pop up (unless Apple Wireless Keyboard is connected).
Activate a text field: Select the field and double-tap it. The insertion mark and the screen keyboard are subsequently superimposed.
Moving the insertion mark: Swipe up or down across the screen to move the insertion mark forwards or backwards within text. Use the rotor to select whether you want to move the insertion mark by character, word or line.
VoiceOver informs you with an acoustic signal when the insertion mark is moved and reads out the appropriate character, word or line. In forward motion, the insertion mark is placed at the end of the word over which it moves and before the space or punctuation mark that follows. In reverse motion, the insertion mark is placed at the end of the word over which it moves and before the space or punctuation mark that follows.
Shifting the insertion mark behind the final punctuation mark at the end of a word or sentence: Use the rotor to return to character-by-character mode.
Annex A Operating aids 122

If the insertion point is moved line by line, VoiceOver reads out every row over which it was moved. For forward movement, the insertion mark is placed at the beginning of the next line (unless it is the last line in the paragraph and then moves to the end of the line that has just been read out). During the reverse movement, the insertion mark is placed at the beginning of the line which is read aloud.
Determine the type of feedback: Select “Settings” > “General” > "Operating aids" > “VoiceOver” >“Read aloud input”.
Using the spelling alphabet when reading input: Select “Settings” > “General” > "Use aids" > “VoiceOver” >“Phonetic feedback”. The text is spelled out. VoiceOver speaks first the letter and then the phonetic equivalent, for example “B” and the next “Berta”.
Deleting a character: Select and unlock the lock by double or split tap on the screen. This is also necessary when typing by touch. To delete multiple characters, you need to touch and hold the Delete button and tap once on the screen with a different finger for each character that is being deleted. VoiceOver reads the character that is deleted. If the “Pitch Change” function is acti fourth, VoiceOver will read out the deleted characters with lower voice.
Selecting text: Select the edit mode for the rotor, swipe up or down to use the “Select” or “Choose All” functions and then tap twice. When using “Select”, double-taping selects the word directly next to the insertion point. When using “Select All” the entire text is selected. Tighten or tighten two fingers to expand or reduce the choice.
Cut, copy or insert: Make sure that the rotor has selected machining mode. Select the text, swipe up or down to select Cut, Copy, or Insert. Then tap twice.
Revocation: Shake the iPod touch or Swipe left or right to undo an action and tap twice.
Entering a diacritical character: In the default input mode, select the button with the corresponding basic sign. Tap the button twice and keep your finger on it until you are informed by an acoustic signal that the bar with the alternative diacritical signs is visible. After that, move your finger to the left or right to select and have read out the alternative characters. Raise your finger to enter the currently selected character.
Change the keyboard assignment: Select the speech mode for the rotor and then strut up or down. Select the default language to use the language set in country settings. The Language option appears in the rotor only if you have selected multiple languages in VoiceOver settings (“Settings” > “General” > "Use aids” + “VoiceOver” > „Languages & Dialects“).
Write with the finger invokes of handwriting mode: Select “Handwriting” with the rotor. If the “Handwriting” option is not included in the rotor, select Settings > General > Control Aids > VoiceOver > Rotor and add it.
Selecting a character type: Swipe up or down with three fingers to choose between uppercase, lowercase, digit and punctuation.
Reading the currently selected character type: Tap with three fingers.
Annex A Operating aids 123

Enter a character: Write the sign on the screen with your finger.
Entering a space: Swipe with two fingers to the right.
Change to a new line: Swipe with three fingers to the right.
Deletion of the sign before insertion mark: Swipe with two fingers to the left.
Selecting an object on the Home screen: Write the initial characters of the object name. If multiple matches occur, write as many characters until the name is unique. Alternatively, you can also swipe up or down with two fingers to select one of the matches displayed.
Enter the code without reading it out: Set the rotor to “Handwriting” on the code entry screen and enter the characters of your code after that.
Selecting a letter in the table index: Select the index to the right of the table and write the letter you want to jump to.
Setting the rotor to an element type when surfing on the Internet: When viewing a web page, enter the initial letter of the Page element type. For example, write “l” if you want to move from link to link by swiping up or down, or “h” if your goal is to change headline to heading.
End of handwriting mode: Continue to rotate the rotor until another selection.
Reading mathematical equations VoiceOver can read mathematical equations that use one of the following encodings:
Reading an equation: Let VoiceOver read the text normally. VoiceOver begins by reading a mathematical equation with the word “math”.
Explore the equation: By double-taping the selected equation, open full screen mode and navigate from one element to another. Swipe left or right to read elements of the equation. Select “Icons”, “Small Expressions”, "Middle Expressions" or "Large Expressions” with the rotor and swipe your finger up or down to select the next element of this size. By further double-taping on the selected element, you can zoom deeper into the equation with the chosen element remaining in midpoint. Then, swipe your finger to the left or right. up or down, to read a part each.
Equations read out by VoiceOver can also be output to a Braille device that uses either the Nemeth code or the code used for Unified English Braille, or braille lines for British English, French, or Greek. For more information, see Using Braille with VoiceOver on page 128.
Annex A Operating aids 124

Using VoiceOver with Safari Search on the Web: Tap the search box, enter the search term and swipe to the right or left to browse downwards or upwards in the list of search suggestions. Then tap the screen twice to search for the search term on the web.
Switch to the next side element of a certain type: Set the rotor to that element type and swipe up or down.
Setting rotor options for surfing the Internet: Select “Settings” > “General” > "Operating aids" > “VoiceOver” >“Rotor”. Tap to select options or. Remove their selection, or move up or down to move an object to another position.
Skip images while navigating: Select “Settings” > “General” > "Operating aids" > “VoiceOver” >“Navigate images”. You can either jump all the pictures over or only those for which there is no description.
Increase clarity for easier reading and navigation: Select the Reader object in the Safari address field (not available for all pages).
If you pair an Apple Wireless Keyboard with your iPod touch, navigating web pages can use commands of fast navigation that require only a keystroke. For more information, see Using VoiceOver with an Apple Wireless Keyboard on page 126.
Using VoiceOver with Cards VoiceOver allows you to zoom in and out maps, select pins, and get information about location.
Explore the map: Move your finger across the screen or swipe left or right to get to another object.
Reduce or increase: Select the map, set the rotor to “zoom” and then swipe up or down with one finger.
Moving the card: Swipe with three fingers.
Leaves in the list of surrounding attractions: Set the rotor to “Sights” and then swipe up or down with one finger.
Consequence of the course of a road: Keep your finger on the street until you hear the announcement “Stop to follow”. Then follow the road with your finger and listen to the spoken clues. When you get off the street, your voice will be higher.
Selecting a pin: Tap a pin or swipe left or right to select one.
Getting information about a place: Tap a selected pin twice to display the associated information. Swipe left or right to select the “More info” button. After that, tap twice to open the information page.
Annex A Operating aids 125

Editing Videos and Voice Memos with VoiceOver VoiceOver gestures allow you to shorten camera videos and voice memos.
Trimming a video: Tap the screen twice while a video is being shown to display the controls for videos. Select the beginning and end of the tool to shorten, and then swipe up or down for adjustments before increasing. VoiceOver specifies the time it will take to record when you use the current position of the tool. Select “Short” and tap twice to make the shortening and finish the process.
Shortening a speech memo: Select the memo in the “Voice Memos” app and tap on “Edit” and after that, start trimming. Select the beginning or end of selection, double-tap and leave your finger on screen to adjust by moving. VoiceOver specifies the time it will take to record when you use the current position of the tool. Tap the play button to listen to the shortened recording. Tap on “Short” if the recording is the correct length.
Using VoiceOver with an Apple Wireless Keyboard You can control VoiceOver using an Apple Wireless Keyboard that has been paired with the iPod touch. For more information, see Using an Apple Wireless Keyboard on page 25.
VoiceOver keyboard commands allow you to navigate the screen, select objects, read on-screen content, adjust the list and perform other VoiceOvers actions. Most commands include the key combination “ctrl choice”, abbreviated to “VO” in the table below.
You can use VoiceOver help to familiarize yourself with keyboard assignment and the actions associated with key combinations. When you use VoiceOver Help, the keys and keyboard commands are read aloud while you press or retrieve them. enter, but without the respective action is actually executed.
VoiceOver keyboard commands VO = ctrl choice
Annex A Operating aids 126

Fast navigation Activate fast navigation to control VoiceOver with the arrow keys.
You can also use the keys on Apple Wireless Keyboard’s numeric keyboard to enter numbers in the Calculator app.
Fast navigation on the Internet with one button If you display a web page with fast navigation enabled, the following buttons allow you to quickly navigate through the page. Press the appropriate button to get to the next object of the specified type. If you press the Shift button when entering the character, it will take you to the previous object.
Annex A Operating aids 127

Text processing For text editing, you have (if the fast navigation is off) follow the commands available. VoiceOver reads the text aloud while you move insertion mark.
Using Braille Lines with VoiceOver You can use a Bluetooth braille line to represent VoiceOver output. Braille lines with input buttons and other control elements can also be used to control the iPod touch when VoiceOver is activated. A full permanent list of supported braille lines can be found on the following website: www.apple.com/en/accessibility/iphone/braille-display.html
Connecting a Braille line: Turn on the screen, open “Settings” > “General” > "Bluetooth" and activate “Bluetoot”. Then select “Settings” > “General” > "Use aids" > “VoiceOver” >“Blind font” to choose the braille line.
Adjust Braille settings: Select “Settings” > “General” > "Operating aids" > “VoiceOver” >“Blind font”. There you have the following options available:
For information about general Braille commands for VoiceOver navigation and specific braille lines, see support.apple.com/kb/HT4400?viewlocale=en DE
Annex A Operating aids 128

The braille line uses the language set for voice control. This is usually the language set for iPod touch under “Settings” > “Country Settings” + “Language”. You can use the VoiceOver language setting to select a different voice over and braille.
Setting the language for VoiceOver: Select “Settings” > “General” > "Country Settings" > "Voice Control".
If you change the language for iPod touch, you may need to reset the voice for VoiceOver and your braille line.
You can view the cell on the left or right side. Define on the far right of your braille line to reflect system status and other information. Example:
Determining the cell on the far left or right side, respectively. right to render status information: Open the “Settings” > “General” > "Use Aids" > “VoiceOver” >“Blind Letter” > Status Cell and tap on “Links” or “Right”.
Display an extended description of the status cell: On your Braille line, press the status cell routing button.
Siri allows you to use your voice to perform certain actions (for example, opening an app). VoiceOver will read Siri’s answers to you. For more information, see Chapter 4, Siri, on page 38.
Zoom in on or out of certain objects with many apps. For example, in Safari you can enlarge the column of a web page by typing twice or “pulling” the column with two fingers. In addition, the operating aids provide a zoom function that allows you to view the entire screen of each app in magnified form. You can also use this zoom function together with VoiceOver.
Activation or deactivation of the zoom function: Select “Settings” > “General” > "Operating aids" > “Zoom”. Optionally, you can also use the short operating aid command. Further information is available under short command for operating aids on page 116.
Reduce or increase: Tap the screen twice with three fingers.
Annex A Operating aids 129

Varying the zoom factor: Tap with three fingers and swipe your fingers up or down. The gesture “Tap and Move” is similar to typing twice. However, in this gesture you do not raise your fingers for the second tap but move them immediately over the screen. After you have started the movement process, you can complete it with just one finger. If you then double-tap with three fingers to reduce the display first and enlarge again, the iPod touch automatically returns to the adjusted zoom factor.
Moving the screen: In the enlarged display, swipe with three fingers across the screen to move the screen. After you have started the movement process, you can continue it with just one finger. Tap with one finger on a spot close to the edge of the display and hold your finger at that location to scroll in the screen viewing direction. The closer you place your finger on the edge, the faster this browsing process will occur. When a new screen is opened, the zoom function shows the top half of the screen enlarged.
When using the zoom feature with an Apple Wireless Keyboard (see Using an Apple wireless keyboard on page 25), the screen display follows the insertion mark and appears in the center of the screen.
In certain situations, reversing the colors on your iPod touch screen can make it easier to read the information that is displayed. When the Color Reverse function is activated, display of the screen reminds you of a photo negative.
Reversing the colors on screen: Select “Settings” > “General” > "Operating aids" > “Reverse colors”.
Even with the VoiceOver deactivated, iPod touch can read selected text.
Activate the read-out function for a selection: Select “Settings” > “General” > "Operating aids" > “Read selection”. In addition, they have the following possibilities:
Reading out text: Select the text and tap on “Talk”.
Read aloud Auto-Text This function reads out the text corrections and suggestions that iPod touch makes during text input.
Activate and disable the “Read Auto Text” option: Select “Settings” > “General” > "Operating aids" > “Read auto text”.
The “Read Auto Text” option can be used together with VoiceOver and the zoom function.
Annex A Operating aids 130

Big text and big text Using large text in alerts and apps like calendar, contacts, mail, messages and notes: Select “Settings” > “General” > "Operating aids" > “Great signs”. There you can activate the option “Greater Dynamic Text” and adjust font size.
Display all objects on iPod touch as bold text: Select “Settings” > “General” > "Use aids" and activate the option “Fetter Text”.
Improving text contrast in low-contrast background (if possible): Select “Settings” > “General” > "Operating aids" and activate the option to increase Contrast.
Reduce the movement of screen objects You can stop certain objects from moving on the screen, such as parallax of the background image that appears in the home screen behind icons.
Reducing the movement on screen: Select “Settings” > “General” > "Operating aids" and select the option to reduce movement.
To help you identify if a switch is in the “On” or “Off” position, you can instruct iPod touch to display additional labels for the switches.
Displaying labels for switches: Select “Settings” > “General” > "Operating aids" and activate the option “On/Off Labels”.
If you use a hearing aid with the “Made for iPhone” logo, you can customize the settings of this accessory on your iPod touch according to your personal needs.
Adjusting hearing aid settings and displaying status: Select “Settings” > “General” > "Operating aids" > “Hearing aids”, or set up the operating aid short command to open the control for the hearing aid. For more information, see the short command on page 116.
Select “Settings” > “General” > "Operating aids" > “Hearing devices” > Control in the lock screen to allow access to the operating aid short command from the lockscreen. You can use these settings to:
Using iPod touch as a remote microphone: With the “Live Listening” function, you can transfer audio from your iPod touch microphone to your hearing aids. This allows you to hear better in some situations by positioning the iPod touch closer to the noise source. Run the function “Home Triple Click”, select “Hearing aids” and tap on “Start Live-listening”.
Streaming audio to hearing aids: You can use audio data and a. stream from the “Phone”, “Music” and “Videos” apps, as well as Siri. To do this, select your hearing aid from the “AirPlay” menu.
Annex A Operating aids 131

Subtitles and extended subtitles The app "Videos" includes the button ("Alternative track"). Tap this button to show the subtitles and extended subtitle provided by the video you are viewing. Normally, the standard subtitles and extended subtitle are displayed. If you want to use special user-assisted subtitles instead (for example, subtitle specifically for the deaf and hearing impaired, UT), you can set up your iPod touch so that it displays specific subtitling (if present in video) rather than default ones.
Use the special subtitles for deaf and hearing impaired (UT) instead of the standard titles and captions: Select Settings > General > Control Aids > Subtitles and Extended Captions, and select Advanced Subtitle + SDH. This option also turns on the subtitles and extended subtitle in the Video app.
Select between available subtitles and extended subtitle: Tap while watching a video in the “Videos” app.
Adjusting the subtitles and extended subtitle: Select “Settings” > “General” > "Use aids" > “Subtitles and extended subtitles” >“Style”. In this area, you can select an existing style option or define your own style using the following features.
Not all videos are designed for extended subtitles.
Mono-Audio The function “Mono-Audo” combines the left and right channels into a single mono signal, which is output in the same way over both channels. Adjust the balance of mono signal to increase volume on either left or right.
Activate or disable the Mono-Audio option and adjust balance: Select “Settings” > “General” > "Operating aids" > “Mono-Audio”.
Assignable Tones You can assign different ringtones to people in your contact list to use the acoustic FaceTime call recognition. Other events such as new emails, sente e-mails, tweets, Facebook post and reminders can also be assigned to specific sounds. Further information on activation and deactivation of tones, page 30.
Ringtones can be purchased from the iTunes Store on iPod touch. For more information, see Chapter 22, iTunes Store on page 99.
Annex A Operating aids 132

Guided Access The guided access feature helps iPod touch users focus on a specific task. With guided access, the use of iPod touch can be limited to a single app. In addition to the app itself, you can also set up the functions of the app. You can use the guided access function for the following purposes:
Activating the guided access: Select “Settings” > “General” > "Use aids" > “Guided access”. After that, you can do the following:
Starting a session with guided access: Open the app that you want to run and press the Home button (“Home Triple Click”) three times in quick succession. Adjust the settings for the session and tap “Start”.
Ending the session with guided access: Run the Home Triple Click function, enter the code you set for the Guided Access option and tap End.
Switch control The switch controller offers the possibility to control iPod touch with only one switch or several switches. There are several ways to perform actions such as selecting, typing, moving and entering, and even freehand drawing. The basic approach is to select an object or location on the screen using a switch and subsequently, by using that same (or another) switch, determine the action you want to perform for the selected object or place. There are three basic approaches:
Annex A Operating aids 133

All three methods, when you select a single object (not a group), show up a menu with the actions (for example, typing, moving and pulling) that you can perform for the selected object.
If you work with several switches, you can set up each switch to perform a certain action and thus customize your object selection procedure. For example, this gives you the option to set up switches instead of object scanning so that you can selectively change from one object to another on request.
You have many options for adjusting the behavior of the switch control system in order to adapt it to your specific requirements and wishes.
Adding a switch and activating the control of the switch You can use any of the following switches:
Adding a switch and setting the action effected thereby: Select “Settings” > “General” > "Operating aids" > “Control panel” >“Changers”.
Activation of the switch control: Select “Settings” > “General” > "Operating aids" > “Control panel”.
Deactivating the switch control: Use one of the scanning techniques to display the “Settings” > “General” > "Operating aids" > “Control panel”.
Terminating the switch control: Press the Home button three times to end switch control.
Basic techniques These techniques can be used for object- and point-based scanning.
Selecting an object: As long as the desired object is highlighted, trigger the switch you have set up to select objects. If you use only one switch, this switch assumes the function of object selection by default.
Showing the available actions: Select the desired object with the Object selection button. The control menu that appears then contains all actions you can perform for the selected object.
Tap on an object: Using the scanning method you prefer, select the “Tap” action in the control menu that appears after an object is selected. Alternatively, you can also use the “Autom” option. Tap in the “Settings” section > “General” > “Operating aids” > Activate switch control. In this case, it is enough if you select the object and wait until that for the “Autom” option. Tap" set time interval expired; (it is "0.75 seconds, unless you have made a change). Alternatively, you can set up a switch that performs the “Tap” gesture. To do this, select “Settings” > “General” > "Operating aids" > “Control panel” >“Shifters”.
Annex A Operating aids 134

Performing other gestures or actions: Select the desired gesture or action in the control menu that pops up after you select an object. Solve when the option “Autom”. Tap" enabled within the interval set for it, select your switch and choose a gesture. If multiple pages of actions are available, tap the points at the bottom of the menu to show another page with more actions.
Hiding the control menu: Tap as long as the icons in the menu are dimmed.
Scroll to display additional objects: Select an object on the screen. Then select “Scroll” in the control menu.
Using a Hardware Action: Select an object on the screen. Then select “Device” in the displayed menu. You can use the menu to simulate the following actions:
Scanning on object basis When scanning on object basis, the individual objects or groups of objects are highlighted in turn on screen until you trigger the Object Selection button and select the highlighted object. When you select a group, then in turn it highlights the objects that belong to this group. Once you select a single object, the scanning is stopped and a menu with actions executable for that object appears. When you first activate the Switch Control, scanning is set to object-based by default. By default, the switch control moves from object to object at regular intervals. However, you can set switches so that they are able to be used on request for the previous or subsequent reset. The next object to jump.
Selecting an object or entering a group: You can observe or They listen to the objects being highlighted in turn. Trigger your Select Object switch as soon as either the object you want to control or the group that belongs to the desired object is highlighted. Navigate down in the object hierarchy until you have selected the object that you want to control.
Leaving a group: Trigger your switch when the dotted highlight line is visible around the object or group.
Annex A Operating aids 135

Perform another action: Select an object on the screen. Then select the desired action in the displayed menu. If you have the option “Autom”. After selecting an object, you must trigger your button within half a three-quarter second to display the menu with available gestures/actions.
Scanning on a point basis When scanning on a point basis, you can select an object on the screen by targeting it with a crosshair.
Activating the scanning on a point basis: First, select an object based on the object. Then select “Settings” in the displayed menu and change the scan mode from “Object” to “Point”. After closing, the vertical crosshair is displayed.
Return to object-based scanning: Select “Settings” in the displayed menu and change the scan mode from “Point” back to “Object”.
Settings and Changes Adjusting the default settings: Select “Settings” > “General” > "Operating aids" > “Control panel”. After that, you can do the following:
Annex A Operating aids 136

AssistiveTouch helps you use the iPod touch if you have difficulty with your touchscreen or even a scan. have the keys. You can use adaptive and AssistiveTouch-compatible accessories (for example, a joystick) to control the iPod touch. AssistiveTouch can also be used without accessories to use gestures that are difficult for you.
Activate AssistiveTouch: Select “Settings” > “General” > "Operating Assistance" > “AssistiveTouch”. You can set AssistiveTouch to be enabled or disabled with the Home button. Select “Settings” > “General” > "Operating aids" > "Operational aid shortcut".
Adjusting the pointer movement (with attached accessories): Select “Settings” > “General” > "Operating aids" > “AssistiveTouch” >“Pointer movement”.
Hide and uncover the AssistiveTouch menu (with accessories connected). On the accessories, click on the secondary button.
Moving the menu button: Move it to any place on the screen.
Hide the menu button (with attached accessories): Select “Settings” > “General” > "Use aids" > “AssistiveTouch” > „Always pop menu”.
Using 2, 3, 4 or 5 fingers for a stringing or pulling movement: Tap the menu button, select “Device” > “More” + “Gestures”, and enter the number of fingers needed for a gesture. Drag or swipe in the direction required for the gesture when appropriate circles are displayed. Tap the menu button when you are finished.
Using a winding gesture: Tap the menu button, “Favorites” and then “Push up.” When the circles are displayed, touch the screen to move them and make a pulling motion anywhere on the screen. Tap the menu button when you are finished.
Creating your own gestures: Tap the menu button, “Favorites,” and then a free placeholder for a gesture. Alternatively, select “Settings” > “General” > "Use aids" > “AssistiveTouch” > Create a new gesture.
Lock or rotate the screen, adjust volume or simulate a shaking motion: Tap the menu button and then “Device”.
Simulate pressing the Home button: Tap the menu button and then “Home”.
Close a menu without using a gesture: Tap the screen outside of the menu.
Annex A Operating aids 137

Landscape Keyboards With many apps, including Mail, Safari, Messages, Notes and Contacts, you can rotate the iPod touch when text inputting and use a larger keyboard.
Voice control The voice control offers the possibility to control iPod touch music playback by means of spoken commands. Further information can be found on voice control at page 27.
You can use the functions of OS X when syncing your iPod touch using iTunes. In the Finder, select “Help” > “Helf Center” and search for the term “operating aid”.
For more information about the operating aids for iPod touch and OS X, see www.apple.com/en/accessibility
Annex III Operating aids 138

International keyboards
International keyboards allow the input of text characters in different national languages, and a. also of Asian languages and languages with the direction from right to left. A full list of supported keyboards can be found on the following website: www.apple.com/en/ipod-touch/specs.html
Managing Keyboards: Select “Settings” > “General” > "Country Settings" > “Keyboards”.
Change the keyboard if you want to enter text in a different language.
Change the keyboard when entering: Place your finger on the globe button to display all keyboards that are activated. To select a keyboard, move your finger to the name of the keyboard and then lift it. The globe button appears when you have activated at least two keyboards.
You can also tap. The name of the now activated keyboard will be briefly displayed when you tap. Keep tapping to call more keyboards that have been activated.
Numerous keyboards have letters, numbers and symbols that are not visible on the keyboard.
Entering letters with accents or other characters: Place your finger on the respective letter, number or symbol key and move it to select a variant. Example:
Searching the Extended Candidate List: Tap the up arrow to the right to display a list of all candidates.
Annex III

When using specific Chinese and Japanese keyboards, you can create a shortcut for a dictionary of word and input pairs. It will be added to your personal dictionary. When you enter a word from the dictionary and use a supported keyboard, the coupled word or input is used for the shortcut.
Activate or deactivate short commands: Select “Settings” > “General” > "Keyboard" > "Short Orders". Shortcuts are available for:
Special input methods In some languages, characters can be entered in different ways using the keyboards. Some examples of this are: Cangjie and Wubihua (Chinese), Kana (Japanese) and smileys. You can also write Chinese characters on the screen with your finger or a pen.
Entering Chinese characters with Cangjie keys: When writing, the proposed characters are displayed. Tap a character to select it, or enter up to five more character components to show additional options.
Entering Chinese Wubihua characters: Use the numeral block to write Chinese characters with up to five strokes: horizontal, vertical, left-bottom, right-bottle and hook (note the correct order). For example, the Chinese sign should be 圈 (circle) with a vertical line 丨.
Annex B International keyboards 140

Writing Chinese Signs: Write Chinese characters directly on the screen with your finger when handwriting mode for simplified or traditional Chinese akti is fourth. When writing the characters, iPod touch recognizes them and displays matching characters in a list. The best match is displayed at the top of the list. When you select a character, characters that are likely to follow this character will appear as additional choices in the list.

Appropriate signs
You can also enter complex characters such as 鱲 (part of the name of Hong Kong International Airport) by writing two or more drawing components in a row. Tap the character to replace the entered characters. Roman signs are also recognized.
Entering the Cana characters (Japanese): Use the Kana keyboard assignment to select syllables. You can view more options for syllables by tapping the arrow key and selecting another syllab or word in the window that appears.
Entering Romaji characters (Japanese): Use the Romaji keyboard to enter syllables. At the top of the keyboard, alternative choices are displayed. Tap an alternative to enter it. You can view more options for syllables by tapping the arrow key and selecting another syllab or word in the window that appears.
Entering smileys and emoticons: Tap the key on a Japanese Kana keyboard. Alternatively, you have the following options:
Annex B International keyboards 141

Handling Treat the iPod touch with all necessary care. Its housing is made of glass, metal and plastic and inside it are delicate electronic components. Do not pierce or break it, do not expose it to an open flame or liquids and do not drop it. Do not use the iPod touch if it is damaged – for example, the screen has cracked – because there is a risk of injury. If you want to protect the surface of iPod touch from scratches, you can use a protective case or cover.
Repair In no case try to open the iPod touch and repatriate it yourself. Dismantling the iPod touch can cause permanent damage to the device and injury. Contact Apple or an Authorized Service Partner if your iPod touch is damaged, malfunctioning, or has been in contact with liquids. Further information about the service can be found in www.apple.com/en/support/ipod/service/faq
Battery Do not try to replace the battery in iPod touch itself, as it can damage the battery and cause overheating and injury. The lithium-ion battery in iPod touch may only be replaced by Apple or an Authorized Apple Service Partner and must be recycled or disposed of separately from the household waste. Do not burn the battery. Information about Apple’s recycling program and battery replacement can be found in www.apple.com/en/batteries www.apple.com/chde/batteries
Displacement Using iPod touch can, under certain circumstances, affect your concentration and lead to dangerous situations. Observe the regulations and regulations regarding prohibition or restricted use of mobile devices and headphones when driving a vehicle. (For example, don’t write a text message while driving a vehicle and don’ t listen to music through headphones when you are on the bike.)
Annex III

Navigation Apps for maps, directions, flyover views and location-based information depend on data services. These data services are subject to change and may not be available in certain countries or territories. This may result in certain maps, directions, flyover views or location-based information being unavailable, not accurate or not complete. Check the information you get on your iPod touch based on your environment. When navigating, trust your common sense. Observe the respective road and traffic conditions and orient yourself in case of deviations on the local signage. Some functions of maps require location services. Further information under Data Protection on page 34.
Charging Charge the iPod touch via the included USB cable and power supply or with a third-party cable and Power Supply that has the “Made for iPod” logo, compatible with USB 2.0 (or later). Using damaged cables or chargers, or charging in damp environments can cause an electric shock. When using the Apple USB Power Adapter to charge iPod touch, make sure that the power plug and power cord are correctly connected to the power supply and mains. Power supplies can become warm during normal use and prolonged contact may cause injury. Always ensure that you have sufficient air supply around power supplies.
Hearing loss Listening to music and other audio media at high volume can cause damage to hearing. Background noise, as well as permanent playback at high volumes can cause sounds to be perceived more quietly than they actually are. Use only receivers, earplugs, headphones, speakers and earbuds that are compatible with your device. Turn on audio and check the volume before inserting earplugs into your ears or putting on headphones. Further information about hearing loss can be found in www.apple.com/en/sound Information about setting a maximum volume on iPod touch under Music Settings on page 62.
Apple headsets The headsets offered for the iPhone 4S and newer models in China (recognizable by the dark rings around the earplugs) are designed to meet Chinese standards, with the iPhone 3S and later models as well as iPad 2 and newers models and iPod touch 5. Generation compatible. Only use compatible headsets with your device.
Radio signals The iPod touch uses radio signals to connect with a wireless network (WLAN). Select “Settings” > General > Info > Copyright > RF load if you need more information about the strength of these radio signals and risk mitigation measures.
Annex C Security, handling & support 143

Radio interference/interferences Note signs and notice boards that prohibit or restrict the use of mobile devices (for example, in healthcare facilities or explosive work). Notwithstanding the fact that iPod touch is designed, tested and produced in compliance with radio frequency emission regulations, such emissions from iPod touch may affect other electronic devices’ operation and cause malfunctions of those other devices. Therefore, turn iPod touch off or acti four the flight mode so that iPod touch does not send out radio signals when you are on an airplane or if requested by supervisors.
Medical devices The iPod touch contains radio components that generate electromagnetic fields and magnets in the lower range. Also the supplied headphones contain magnets in the earplugs. These electromagnetic fields and magnets can cause impairment in pacemakers, defibrillators and other medical devices. Always keep a minimum distance of 15 cm between your pacemaker or defibrillator and the iPod touch or earplugs. If you suspect that the iPod touch affects the functionality of a pacemaker or other medical device, you should immediately stop using the iPod and ask your doctor for more information about the relevant medical device.
Physical complaints Talk to your doctor and refrain from using the iPod touch until that time if other physical discomforts occur (for example, seizures or fainting attacks or eye or headaches) you suspect could be caused by using the iPad touch.
Explosive hazardous areas Do not charge your iPod touch in explosive areas (for example, at gas stations) or where the air has a high concentration of chemicals or particles (e.g. grain dust, dust or metallic powder). Follow all notice boards, warnings and instructions.
Repetitive movements Repetitive movements (for example, when capturing texts longer than required or playing on the iPod touch for a long time) can cause discomfort in hands, arms, shoulders, neck and other parts of the body. When you experience such complaints, stop using the iPod touch and talk to your doctor.
Activities with far-reaching consequences This equipment shall not be used in areas where malfunctions may cause death, injury or serious damage to the environment.
iPod touch-loop (available for some models) On the back of iPod touch, press on the button to make it pop out, swipe the loop over and tighten it. For certain activities, using the iPod touch-loop (hand strap) can lead to risks of injury, especially if the loop gets trapped or caught, such as when working with machines. Don’t swing the iPod touch back and forth when using the tape. This can cause it to detach and injure or damage.
Threat of suffocation Certain iPod touch accessories can pose a suffocation hazard for infants and young children. Keep this accessory away from infants and toddlers.
Annex C Security, handling & support 144

The front of the iPod touch has a glass cover with an oil-repellent coating resistant to fingerprints. This coating wears out over time during normal use. Cleaning agents and scrubbing agents reduce the protective effect and can scratch the glass.
Handling of plugs, connectors and buttons Never try to force a plug into a port and never press too hard on a button. Damage even resulting from this is not covered by the guarantee. If the plug cannot be connected easily, it probably does not fit into the connection. Check if the connector is blocked and make sure that plug and port match each other, and that you have aligned the connector correctly with the connection.
Lightning Discoloration of the Lightning plug is normal when used regularly. The discoloration may be caused by dust, contaminants and contact with liquids. Pull the Lightning cable off your computer or power supply and clean it with a soft, dry and non-fussel cloth if you want to remove discoloration. Also, always unplug the cable when it gets warm during use, if iPod touch is not charged or synced. Do not use cleaning agents or liquids to clean the Lightning connector.
Operating temperature The iPod touch is designed for ambient temperatures between 0° and 35°C, and storage temperatures of -20° to 45°C. The iPod touch can be damaged when operating or storing outside of these temperatures, or the battery life may shorten. Do not subject the iPod touch to an abrupt change in air temperature or humidity. It is normal when the iPod touch heats up during use or battery charging.
If the temperature inside of iPod touch overshoots normal operating temperatures (e.g., if it is not a melting point). B. in a vehicle parked for long periods of time in the sun, the iPod touch tries to regulate temperature and the following situations can occur:
Important: As long as the temperature warning is visible, you may not be able to use iPod touch. If the iPod touch cannot regulate indoor temperature with the above measures, sleep will be activated until the device is cooled. Put the iPod touch in a cooler place (not right out of the sun) and wait for several minutes before trying to use it again.
Further information can be found in support.apple.com/kb/HT2101?viewlocale=en DE
Annex C Security, handling & support 145

iPod touch support website Comprehensive support information can be found on the site www.apple.com/en/support/en-ipodtouch Contact Apple to get personal support (not available in all regions). Details below www.apple.com/en/support/contact
Restarting or restarting, respectively. Reset iPod touch If you have functional problems, try restarting the iPod touch by forcing that app to quit or resetting your device.
Restarting the iPod touch: Press and hold the standby button until the red slider appears. Move the slider with your finger to turn iPod touch off. Press and hold the standby button until the Apple logo appears to turn iPod touch back on.
Immediately quit an app: When the Home screen appears, double-click on the Home button and swipe up over the Apps screen.
If the iPod touch doesn’t turn off or if the problem persists, you may need to reset your iPod touch. Only do this if your iPod touch cannot be restarted.
Reset the iPod touch: Press the Standby and Home buttons for at least ten seconds until you see the Apple logo.
You can reset the dictionary, network settings, home screen layout and location alerts. You can also delete all your content and settings.
Reset iPod touch settings Reset iPod touch settings: Select Settings > General > Reset and then select an option:
Annex C Security, handling & support 146

Get information about your iPod touch Viewing information about the iPod touch: Select “Settings” > “General” > "Info". You can and a. display the following objects:
Your iPod touch sends diagnostic and usage data to Apple. This helps Apple to improve the products and services offered. The data transmitted does not contain any personal information that allows conclusions to be drawn about you, but it may include location information.
Displaying or disabling diagnostic information: Select “Settings” > “General” > "Diagnosis & Use".
Information on use Displaying information for use: Select "Settings" > "General" > Use to
Disable iPod touch If your iPod touch has been disabled because you forgot your code or entered the wrong code too many times, you can restore the device based on a backup (backup) made using iTunes or iCloud and reset your code. For more information, see Restoring iPod touch on page 149.
If you get feedback in iTunes that your iPod touch is locked and you should enter the code, see support for more information.apple.com/kb/HT1212?viewlocale=en DE
VPN settings A virtual private network (VPN, Virtual Private Network) allows secure access to private resources over the Internet (for example, your organization’s network). You may need to install a VPN app from the App Store that configures your iPod touch so you can access a network. In this case, contact your system administrator for information about the app and necessary settings.
Annex C Security, handling & support 147

Profile settings Configuration profiles are used to set the iPod touch within companies or school networks. -accounts are set. You may be asked by email to install or/and/or send a configuration profile sent to you. load and install one from a website. The iPod touch requests permission to install the profile and shows what information is contained within the file. You can view your various installed profiles under “Settings” > “General” > Profiles. When you remove a profile, all of the settings, apps and data associated with it are also removed.
Create an iPod touch backup You can use iCloud or iTunes to create automatic iPod touch Backups (in iTunes via “Trayer” > Device > Backup). When you make backups through iCloud, you cannot simultaneously use iTunes to create automatic backups on your computer. iCloud creates backups on the iPod touch every day via WLAN if it is connected to a power source and locked. The date and time of the last backup is displayed at the bottom of the “Storage & Backup” screen.
For the following objects, you can use iCloud to create a backup:
Activating iCloud backups: Open “Settings” > “iCloud” and log in if necessary. with your Apple ID and password. Open “Storage & Backup” and enable the option to backup iCloud. In iTunes, you can enable backups by selecting “Trayer” > “Device” > "Backup".
Immediately run a backup: Open Settings > iCloud > Storage & Backup and tap “Create backup now”.
Encryption of backups: iCloud backups are automatically encrypted. This way, your data is protected from unauthorized access when transferred to other devices and after backing up in iCloud. If you use iTunes to create backups, you can select Encrypt iPod Backup from the Overview pane of iTunes.
Manage your backups: Open Settings > iCloud > Storage & Backup and tap Manage storage space. Tap the name of your iPod touch. You can determine which apps to include in iCloud backups and remove existing backups. In iTunes, you can remove a backup from the iTunes settings.
Display of devices included in the backup: Open Settings > iCloud > Storage & Backup > Manage storage space.
Stop the automatic iCloud backups: Open Settings > iCloud > Storage & Backup and disable the option "iCloud backup".
Annex C Security, handling & support 148

Music that wasn’t purchased in iTunes won’t be backed up to iCloud backups. You can backup and restore this content with iTunes. For more information, see Synchronizing with iTunes on page 17.
Purchased content and photo sharing content do not take up any part of your free 5GB storage space in iCloud.
For more information about making backup copies for your iPod touch, see support.apple.com/kb/HT5262?viewlocale=en DE
Update and restore The iPod touch software can be updated via “Settings” or in iTunes. You can also delete or restore the iPod touch. Use iCloud or iTunes to recover the data from a backup.
Update the iPod touch The iPod touch software can be updated via “Settings” or in iTunes.
Wireless update of iPod touch: Select Settings > General > Software Update to check for available updates on iPod touch.
Software Update in iTunes: iTunes checks every time you sync iPod touch to iTunes that a software update is available. For more information, see Synchronizing with iTunes on page 17.
For more information about updating the iPod touch software, see support.apple.com/kb/HT4623?viewlocale=en DE
Restoring the iPod touch You can restore iPod touch from a backup using iCloud or iTunes.
Recover from iCloud Backup: You can reset your iPod touch if you want to delete all settings and information, then log in to iCloud and select “Recover from Backup” on Setup Wizard. Further information under restarting or Reset the iPod touch to page 146.
Recover from iTunes backup: Connect the iPod touch to the computer you typically use for syncing, select iPhone in iTunes and click on “Recover” from the Overview screen.
If iPod touch software is restored, you can either configure the iPod touch as a new device or recover your music, videos, apps and other content from a backup.
For more information about recovering iPod touch software, see support.apple.com/kb/HT1414?viewlocale=en DE
Annex C Security, handling & support 149

Sell or Give away iPod touch Make sure you have removed all content and personal information from your iPod touch before giving it away or selling. Note that the activation lock is active if you have activated “Find my iPod touch”. For more information, see the “Find my iPod touch” feature below: on page 35. You must therefore unlock the activation lock so that the new owner can activate iPod touch using his account.
Delete the iPod touch and remove activation lock: To do this, select “Settings” > “General” > "Reset" > “Delete Content & Settings”.
Further information can be found in support.apple.com/kb/HT5661?viewlocale=en DE
More information, service and support See below for more information about security, software and service for iPod touch.
Safe handling of iPod touch Further information is available under Safety Information on page 142.
iPod touch service & support, tips, user forums and Apple software downloads
Open www.apple.com/en/support/ipodtouch
Latest information about the iPod touch Open www.apple.com/en/ipodtouch
Managing your Apple ID account Open the appleid.Apple.com/en De DE, appleid.Apple.com/ de AT, appleid.apple.com/en CH
Using iCloud Go to help.Apple.com/icloud
Using iTunes Open iTunes and select “Help” > “iTunes Help”. An online introduction to iTunes (maybe not available in all countries and regions) can be found at www.apple.com/en/support/itunes
Using Other iOS Apps from Apple Open www.apple.com/en/support/ios
Guarantees First, consider the instructions in this manual. Then open the website. www.apple.com/en/support/ipodtouch
View the regulatory provisions of iPod touch
Select Settings > General > Info > Copyright > Regulatory Notes on iPod touch.
Replacing the iPhone battery Further information can be obtained on www.apple.com/en/batteries/replacements.html
Annex C Security, handling & support 150
Information about (m) action

FCC Compliance Statement This device complies with the provisions of Section 15 of the Federal Communications Commission (FCC) guidelines. Operation shall be carried out under the following two conditions: (1) This equipment must not cause any dangerous interference and (2) this equipment must accept all types of interference, including those that result in unwanted events.
Note: This device has been tested and meets the limits for a Class B digital device as defined in Section 15 of FCC guidelines. These limits ensure adequate protection against harmful interference within residential buildings. This apparatus produces and uses radio frequency energy which can be emitted and, if installed or used incorrectly but not according to the manufacturer's instructions, causes harmful interference with reception of broadcasting. However, there is no guarantee that a certain installation will not cause any interference. If the equipment causes radio or television reception interference, which can be checked by turning it on and off, the user should try to correct the fault by one or more of the following measures:
Important: Any modification or alteration to the Device that has not been explicitly approved by Apple may render electromagnetic compatibility (EMC) invalid and result in a withdrawal of its operating license. The product's electromagnestic compatibility (EMC) was demonstrated under conditions such as the use of compatible peripheral devices and shielded cables between system components. It is important to use compatible peripherals and shielded cables between system components in order to minimise the risk of interference from radio, television or other electronic devices.
Declaration of Legal Provisions in Canada This device complies with the Canadian Industry Canada regulations for license-free radio equipment. Operation shall be carried out under the following two conditions: (1) This equipment must not cause any malfunctions and (2) this equipment must accept any kind of malfunction, including those that result in unwanted events.
The présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareills radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’Appareil doit accepter tout broUillage radi oélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Annex C Security, handling & support 151

Disposal and recycling information You must properly dispose of the iPod touch in accordance with applicable laws and regulations. Since this product contains a battery, it must be disposed of separately from the household waste. Dispose of your iPod touch at the end of its life cycle in accordance with regulations and laws
Replacement of the battery: The lithium-ion battery in iPod touch may only be replaced by Apple or an Authorized Apple Service Partner and must be recycled or disposed of separately from the household waste. Further information on replacing the battery can be found in www.apple.com/en/batteries
Information about Apple’s recycling program can be found on the Internet at www.apple.com/en/recycling
Turquoise:
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur.
The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collec tion and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Union Européenne—informations sur l’élimination: The symbole ci-dessus signifie que, conformé ment aux lois et réglementations locales, vous devez jeter votre produit et/ou sa batterie sépa rément des ordures ménagères. Lorsque ce produit arrive en fin de vie, apportez-le à un point de collecte désigné par les autorités locales. The collection of funds and the recycling of products and batteries in order to provide aid for natural resources and assurers, is also recyclé de manière à protéger la santé humaine et l’environnement.
European Union – Information on disposal: The above symbol indicates that this product and/or the battery used with it must be disposed of in accordance with applicable legal regulations and separately from household waste. Deliver this product to an official collection point for disposal. Separate collection and recycling will protect the reserves of raw materials, ensuring that all health and environmental protection provisions are respected when recycled.
Annex C Security, handling & support 152
European Union—Disposal information

Unione Europea—informazioni per lo smaltimento: Il simbolo qui sopra significa che, in base alle leggi e alle normative locali, il prodotto e/o la sua batteria dovrebbero essere riciclati separa tamente dai rifiuti domestici. Quando il prodotto diventa inutilizzabile, portalo nel punto di rac colta stabilito dalle autorità locali. La raccolta separatea e il riciclaggio del prodotto e/o della sua batteria al momento dello smaltimento aiutano a conservare le risorse naturali e assicurano che il germágóríkél nel rispetto della salute umana e dell’ambiente.
Europeiska unionen—information om kassering: Symbolen ovan betyder att produkte och/ eller dess batteri enligt lokala lagar och bestämmelser inte får kastas tillsammans med hushåll savfallet. När produkte har tjänat ut måste den tas till en återvinningsstation som utsetts av lokala myndigheter. Genom att låta den uttjänta produkte och/eller dess batteri tas om hand för återvinning hjälper du till att spara naturresurser och skydda hahlsa och miljö.
Brasil—Informações sobre descarte e reciclagem:
O símbolo indica que este produto e/ou sua bateria não devem ser descartadas no lixo doméstico. Quando decidir descartar este produto e/ou sua bateria, faça-o de acordo com as leis e diretrizes ambientais locais. Para informações sobre substâncias de uso restrito, o programa de reciclagem da Apple, pontos de coleta e Telefone de informaçaões, visite www.apple.com/br/environment
Apple and the Environment, Apple Inc. is constantly striving to minimise the environmental impacts that can result from using Apple systems and products. Further information can be found in www.apple.com/environment
Annex C Security, handling & support 153

K.K. Apple Inc. © 2013 Apple Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks and property of the Bluetooth SIG, Inc. and are owned by Apple Inc. Used under license.
Apple, the Apple logo, AirDrop, AirPlay, AirPort, AirPORT Express, Airport Extreme, Aperture, Apple TV, Cover Flow, FaceTime, Finder, iBooks, iCal, iLife, iMessage, iMovie, iPad, iPhone, iPod, iPod touch, iSight, iTunes, iTunes U, Keynote, Mac, Numbers, OS X, Pages, Passbook, Safari, Siri, Spotlight and Time Capsule are trademarks of Apple Inc. registered in the USA and other countries.
Adobe and Photoshop are trademarks or registered trademark of Adobe Systems Incorporated in the USA and/or other countries.
Names of other companies and products mentioned here are trademarks of their respective rightholders.
The mention of products that are not from Apple is for informational purposes only and does not constitute advertising. Apple does not assume any warranty regarding the selection, performance or usability of these products. All agreements, contracts or warranty claims apply directly between the respective manufacturer and the respective users. All efforts have been made to ensure that the information listed in this manual is correct. Apple Inc. However, over does not guarantee the correctness of the contents of this manual.
AirPrint, EarPods, Flyover, Guided Access, Lightning and Multi-Touch are brands of Apple Inc.
Apple Store, Genius, iAd, iCloud, iTunes Extras, iTunes Plus and the iTunes Store are service marks of Apple Inc. registered in the United States and other countries.
App Store, iBooks Store and iTunes Match are service brands of Apple Inc.
IOS is a trademark or registered trademark of Cisco in the United States and other countries, and it is used under license.
NIKE and Swoosh Design are trademarks of NIke, Inc. and its subsidiaries, and are used under license.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.