Instruction/ maintenance manual of the product 2-slot XFP 10 GIgabit Module ZyXEL Communications
Go to page of 17
Copyright © 2007. All rights reserved EM-422 2-Slot XFP 10Gigabit Module User ’ s Guide V ersion 1.00 7/2007 Edition 1.
EM-422 User’s Guide 2 Overview The EM-422 is an upli nk module with two slots for XFP (10- Gigabit Small Form Factor Plugga ble) transceivers. It is designed for use with high-speed switches, such as the XGS- 4528F . After installing the EM-422 in a switch, the switch can have 10 Gigabit connections to a backb one switch or other network devices.
3 EM-422 User’s Gu ide 1 Hardware Inst allation Follow these steps to install the EM-422 in a switch. " Modules are NOT h ot swappable! 1 T urn off your switch and unplug all power supply cords (including any backup power supply cords) from the switch.
EM-422 User’s Guide 4 4 Insert the EM-422 into an available expansion slot on the switch. Press it firmly until the EM-422 snaps into place. " Never force, bend or tw ist the EM-422s into the expansion slot s. 5 Secure it to the switch with the retaining screws.
5 EM-422 User’s Gu ide 2 T ransceiver Inst allation Use the following steps to inst all an XFP transceiver . 1 Insert the transceiver into th e slot with the exposed section of PCB board facing down. 2 Press the transceiver firmly until it clicks into place.
EM-422 User’s Guide 6 The following table describes the LEDs on the EM-42 2 panel. 4 T ran sceiver Removal Use the following steps to remove an XFP transceiver . 1 Open the transceiver ’s latch (latch styles vary). 2 Pull the transceiver o ut of the slot.
7 EM-422 User’s Gu ide 5 T roubleshooting V None of the lights turn on af ter I install the EM- 422 and connect it to a network de vice. • Make sure the EM-422 is properly installed in a switch. • Make sure that you are using the XFP tran sceivers to con- nect the EM-422 to other device(s).
EM-422 User’s Guide 8 7 Safety W arnings 1 For your safety , be sure to read and follow all warning notices and instructions. • Do NOT use this product near water , for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids.
9 EM-422 User’s Gu ide • This product is recyclable. Dispose of it properly . 8 Legal Information Certificatio ns Federal Communications C ommission (FCC) Interference St a tement This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful int erference.
EM-422 User’s Guide 10 T aiwanese BSMI (Bureau of Standards, Metrology and Inspection) A W arning: Notices Changes or modifications not expressl y approved by the party responsible for compliance could void the user's authority to operate the equipment.
11 EM-422 User’s Gu ide Note Repair or replacement, as provided under this warranty , is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose.
EM-422 User’s Guide 12 Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability aris ing out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent right s of others.
13 EM-422 User’s Gu ide Czech Republic • E-mail: info@cz.zyxel.com • T elephone: +420-241-091-350 • Fax: +420-241-091-359 • Web: www .zyxel. cz • Regular Mail: ZyX EL Co mmu nica ti ons , Cze ch s .r .o., Modr an ská 62 1, 1 43 01 Praha 4 - Modrany , Ceská Republika Denmark • Support E-mail: support@zyxel.
EM-422 User’s Guide 14 • T elephone: +36-1-3361649 • Fax: +36-1-3259100 • Web: www .zyxel.hu • Reg ul ar M ail : ZyXEL Hungary , 48, Zoldlomb S tr ., H-1025, Budapest, Hungary India • Support E-mail: support@zyxel.in • Sales E-mail: sales@zyxel.
15 EM-422 User’s Gu ide • Web: www .us.zyxel.com • FTP: ftp.us.zyxel. com • Regular Mail: ZyX EL Co mmu nica ti ons Inc. , 1 130 N . M iller S t., Anaheim, CA 92806-2001, U.S. A. Norway • Support E-mail: support@zyxel.no • Sales E-mail: sales@zyxel.
EM-422 User’s Guide 16 • Reg ul ar Ma il : ZyXEL Communications, Art e, 21 5ª planta, 28033 Madri d, Spa i n Sweden • Support E-mail: support@zyxel.se • Sales E-mail: sales@zyxel.se • T elephone: +46-31-744-7700 • Fax: +46-31-744-7701 • Web: www .
17 EM-422 User’s Gu ide.
An important point after buying a device ZyXEL Communications 2-slot XFP 10 GIgabit Module (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications 2-slot XFP 10 GIgabit Module yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications 2-slot XFP 10 GIgabit Module - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications 2-slot XFP 10 GIgabit Module you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications 2-slot XFP 10 GIgabit Module will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications 2-slot XFP 10 GIgabit Module, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications 2-slot XFP 10 GIgabit Module.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications 2-slot XFP 10 GIgabit Module. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications 2-slot XFP 10 GIgabit Module along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
