Instruction/ maintenance manual of the product ZSR0104C Series Zonet Technology
Go to page of 63
Page i Z S R 0 1 0 4 C S e r i e s Br oadband Switch Router User Manual.
Page ii FCC Interference S tatement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause har m ful in terference, and (2) this device must accept any interference received, i ncl uding interference that may cause undesired operation.
Page iii The Specifications of ZSR0104C Series W AN 1 RJ-45 10/100Mbps Ethernet Port LAN 4 RJ-45 10/100Mbps Ethernet Ports Reload Button Reloading Factory Default Settings Client OS Support W in95/98/.
Page iv T able of Contents FCC Interfer ence S tatement................................................. ii The Specifications of ZSR0104C SERIES......................... iii Chapter 1 Intr oduction ....................................... 1 1.1 The ZSR0104C SERIES Br oadband Switch Router .
Page v 3.2 Connect Ethernet Hub/Sw itch to ZSR0104C SERIES 7 3.3 Connect W ir eless Access Point to ZSR0104C SE RIES 7 3.4 Connect Cable/xDSL Modem to ZSR0104C SERIES7 3.5 Power up ZSR0104C SERIES ..................................... 8 Chapter 4 Use Y our ZSR0104C SERIES .
Page vi 5.6 DHCP Server ................................................................. 25 1. DHCP Definition .................................................................................. 25 2. DHCP Server in LAN ...............................
Page vii Appendix B: Common Port Numbers ............. 51 Appendix C: T erminology ................................ 52 Appendix D: T echnical Support .................... 56 D.1 Hardwar e Pr oblem ......................................................
Page 1 Chapter 1 Intr oduction Thank you for purchasing ZS R0104C SERIES Broadband Switch Router . This chapter covers a bri ef description o f ZSR01 04C SE RIES features, pack age content, installation requirements, and the organization overview of this User ’ s Manual.
Page 2 LAN clients. Therefore the LAN cl ients “ share ” the only one W AN IP address, and it is called Broadband Sw itch . ‧ Firewall ZSR0104C SERIES provides preven ts Ping and TCP/UDP Echo Attack, Hacker ’ s Scan, and Denial of Service (DoS).
Page 3 client will re ceive the same LAN IP address. ‧ Remote Management ZSR0104C SERIES can be configured and managed fro m the W A N side via a sp ecific port. ‧ MAC Clone ZSR0104C SERIES allows users to specify the MAC address of the Network Interface Card if Internet Service Provider has the requirement .
Page 4 concepts of ZSR0104C SERIES. Enjo y your use of ZSR0104C SERIES! Organization of This User’ s Manual Chapter 1, Intr oduction It briefly describes the features of ZSR0104C SERIES. Chapter 2, Get to Know the Hardware It explains the LED and port functions on the front and back panels.
Page 5 Chapter 2 Get to Know The Hardwar e This Chapter explains ZSR0104C SERIES LED and Port functions. 2.1 LED Indicators ZSR0104CP Front Panel ZSR0104C Fr ont Panel F i g u r e 2 - 1 Device Indicators Power: The Power LED ill uminates whenever ZSR0104C SERIES is powered on.
Page 6 2.2 Back Panel On the back panel, ZSR0104C S ERIES has 4 RJ-45 10/100Mbps Ethernet LAN ports, and 1 RJ-45 10/100Mbps Ethernet W AN port. In addition, it h a s a Reload button and a Power Connector (7.5V 0.7A). (Figure 2-2) ZSR0104CP Rear Panel ZSR0104C Rear Panel F i g u r e 2 - 2 1.
Page 7 SERIES power adapter into the power outlet. Step 3. It takes around 15 seconds to reset. The Power LED wil l turn on Green init ially . W ait for it becomes Red then r ele ase th e Rese t button. Step 4. T ry to connect http://192.168.1.1/ via your W eb browser .
Page 8 W AN port. 3.5 Power up ZSR0104C SERIES Connect the correct Power Adapter to ZSR0104C SE RIES. Then plug the Power Adapter into an AC power outlet. The LED status will be as followed. 1. Power LED and the 4 LAN port’ s LED will turn on for the first sec ond.
Page 9 Step1. Launch a w eb browser on y our client PC connected to ZSR0104C S ERIES. Then point th e W eb browser to http://192.168.1.1 (http://192.168.1.1 is ZSR0104C SERIES d efault IP address.) If the router IP address was configured w ith dif ferent IP address, use the configured IP address instead of 192.
Page 10 Figure 4 –2 First please choose your local time zone to set ti me for your NA T . If have daylight saving click the checkbox and input the start da te and end date.
Page 11 Y ou will see 4 options as followed. If Internet access is through the cabl e modem, Please click the selection button of the “ Cable M odem ”. Then click “N ext” button. A. Cable Modem Connection T wo option fields might be required to enter by some Internet Service Providers.
Page 12 The defa ult W AN S ettin g of ZSR0104C SERIES is Cable Modem Connection w ithout Host Name and MAC Clone If you don’t know the MAC address of your Network Interface Card, follow the steps to obtain the information. The MAC address information might be helpful when you need to use MAC Clone.
Page 13 Fixed - IP is a W AN access type provided by some Internet Service Providers. Y ou need to enter the information of IP address, Subnet Mask, Default Gateway , Primary DNS Server , and Secondary DNS Server .
Page 14 b. Idle Time field: If the Id le T ime was specified with non-zero nu mber , ZSR0 104C SERIES router disconnects the PPPoE session after there was no data traffic on W AN interface within the specified “I dle Time ” m inutes.
Page 15 a. Idle Time field: If the Id le T ime was specified with non-zero nu mber , ZSR0 104C SERIES router disconnects the PPTP session after there was no data traffic on W AN interface within the specified “I dle Time ” m inutes.
Page 16 Step 5. The ” DHCP Setting” page is used to conf igure DHCP Server and D HCP Client in LAN .If DHCP Server enabled, the LA N PC Client can automatically obtain the I P settings, including IP address, Domain Name, Subnet Mask, Primary DNS, and Secondary DNS from ZSR0104C SERIES .
Page 17 Step 2. Click the “ Advanced Setup “ (see Figure 4 – 2) and w ill be displayed, Figure 5 - 1. Step 3. The Router S tatus screen will show up and tell the current W AN and LAN IP sett ings of your ZSR0104C SERIES, including IP address, Subnet Mask, Gateway , Primary DNS, and Secondary DNS.
Page 18 5.3 T ime Click the “ S yst em/Time ” button, will see the F igure 5-3 Figure 5 - 3 If you want to assign th e timeserver , enter the IP address t hen click “A pply” button to save. If sntp server gets time from network, the system ti me will display now ti me, else time is NULL.
Page 19 The Administrator Setting pa ge provides the following configuration options: a. Change Administrator ’ s User Name and Password b. W AN Side Administration Change Administrator ’ s Us er Name and Password. Y ou can specify a new user name and password for the ad ministrator .
Page 20 5.5 Firmwar e Upgrade A web-based interface , via Microsoft Internet Explore or Netscape we b browser , is provided to allow the user upgrade the latest firmware to the NA T Rou ter .
Page 21 Through the “Choose file” menu, locate t he latest router firmware and open it. For example, the latest firmware file, zonet_2004.bin, is located and opened, the file name will appear at the en try of the firmware file name.
Page 22 If click the “ OK ”, will appear firmware upgrade programming page, please wait for 35 sec onds, the Nat will restart. When the firmware update is in process, please do not plug out the pow er adapter of ZSR0104C SERIES. The sudden disconnection of power supply may damage the flash hardware and cause the malfunction of ZSR0104C SERIES.
Page 23 button on the confirmation page to make the ZSR0104C SERIES reboot. (See Figure 5 - 6) Figure 5 – 5 Figure 5 – 6 After clicking the OK button, Please remember: use 192.
Page 24 Step 1. Select DDNS service provider . ZSR0104C SERIES supports two DD NS service providers, ww w .no-ip.com or www .dyndns.or g . Browse the DDNS service provider ’ s web page and register a new account there. Y our DDNS service provider will provide y ou the account ID and password.
Page 25 If dy ndns.org was selected, User Name, Password and Hos t Name are mandator y; Enable W ild card, Mail Exchang er and Backup MX are optio nal.
Page 26 receive the same LAN IP address, when ZSR010 4C SERIES assigns IP addresses in th e next time. B. The Pool Range of Assign ed IP Address When DHCP is enable d, you can assign a group of LAN IP addresses. The group is called as “the pool.” Y ou can enter numbers from 2 to 254 in the blan ks.
Page 27 5. DHCP Client List When DHCP i s enabled. W ill see ho w many DHCP clients get IP address fo rm the NA T . If you want to enable DHCP in your PC, refer to A.
Page 28 As illustrated as above, when ZSR0104C SERIES obtains traffic of Port 21 from the Internet, it will forward it to the FTP server with LAN IP address 192.168.1.2. If ZSR0104C SERIES receives traffic of Port 80, it will re-direct it to the W eb server with LAN IP 192.
Page 29 5.10 Fir ewall 1. DMZ Host Configurat ion Y ou can set up y our personal co mputer or networ k-ready device to be a public or local D MZ hosts. In general, Internet applications use only one unique port and can pass through a NA T Router by enabling V irt ual Server .
Page 30 illustrated Then you will be abl e to comm unicate with y our friend via NetMeetin g. Besides, the other LAN clients behind ZSR0104 C SERIES are still protected by its firewall, and the traffi.
Page 31 T o enable Publi c DMZ Host, check Enable below Public DMZ Host and enter the public IP address of the device you want to assign as the Public DMZ Host. Then click the button Apply to make your settings take effect. The server in the Public DMZ is not protected by ZSR0104C SERIES firewall.
Page 32 3. URL Filter If you want to restrict your LA N clients from accessing certain w ebsites, enter the keywor ds of the websites in the blank. ZSR0104C SERIES will examine the packet information when receiving the packet with port 80 from the W AN.
Page 33 Checked this ite m, the LAN client c an access to the following services. For example, forwarding port 21.The LAN client only can access ftp in the Internet. Please refer to Appendix B: Common Po rt Numbe rs . P . 5. MAC Filter A. Di sable Checked this item, t he LAN client can acce ss to Internet.
Page 34 6. IP Filter A. Di sable Checked this item, t he LAN client can acce ss to Internet. B. Blocking the following IP Checked this item, the following IP cannot access to Internet. For example, blocks IP address 192.168.1. 2 this client cannot access Internet.
Page 35 4. DNS (Domain Name System) Failure. Please refer to the s olution for each reason and solv e y our problem. If the problem persists, please contact our authorized distributor or dealer for technical support. 1. Router ’ s Hardware Failure Solution: 1.
Page 36 3. Failed C onnection on ZSR0104C SERIES W AN Side Solution: 1. Check if the W AN link/act LED is continuously on or flashing. 2. V erify that your W AN access type and the correspondi ng information are the same as the datasheet provided by your Internet Service Provider .
Page 37 Appendix A: A.1 Disable W eb Proxy When the Web Proxy is disabled, your Web browser can obtain information from ZSR0104C SERIES without the W eb Proxy block.
Page 38 Step 2. Click the Connections tab. Press the LAN Settings... button. (Figure A -22) Figure A–22 Step 3. Verify the item “ Use a proxy server ” is not ch ecked.
Page 39 D. B. Ne tscape Step 1. Open Netscape and click the Stop button. Choose Edit and then click Preferences... A Preferences window will pop up. (Figure A-24) Figure A–24 Step 2.
Page 40 Step 3. Ch ec k Di rect connection to the Inte rnet. Then click the OK button. (Figure A-26) Figure A–26 2. For W indows XP If you use Windows XP, follow the steps to disable Web Proxy in your Web browser. E. A. Internet Explore r Step 1. Open Internet Explorer and click the Stop button.
Page 41 Step 2. Click the Connections tab. Press the LAN Settings... button. (Figure A-28) Figure A–28 Step 3. Verify that the ite m Use a proxy server for your LAN is unch ecked.
Page 42 F. B. Netscape Step 1. Open Netscape and clic k the Sto p button. Choose Edit and then click Preferences... A Preferences window will pop up. (Figure A-30) Figure A–30 Step 2.
Page 43 Step 3. Ch ec k Di rect connection to the Inte rnet . Then click the OK button. (Figure A-32) Figure A–32 3. For MAC The instructions are based on Mac OS 8.5. It is similar to Mac OS 7.x and above. Follow the steps to disable the Web Proxy. G.
Page 44 I. A. Nets cape Step 1. Launch Netscape Nav igator and cli ck the Stop but ton. Go thr ough the p ath “Edit → Preferences...” Step 2. In Category, find Proxies under the advanced item. Step 3. Ch ec k dire ct connection to the Internet an d cli c k th e OK button.
Page 45 Step 2. Run the WINIPCFG command. (Figure A-34) Figure A–34 Step 3. To release the previous IP settings in your computer, choose your network interface card in the menu. Then click th e Release button. (Figure A-35) Figure A–35 Step 4. To obtain new IP setting s from WPD –140, click the Renew button.
Page 46 2. For W indows 2000 /NT If you use Windows 2000 or NT, follow the steps to ve rify the IP settings in your client PC. The steps and screenshots here are based on Window s 2000. It is similar to the other Windows Operating System. Step 1. Go through the path “Start → Run.
Page 47 Step 3. To release the previous IP settings in your computer, run the command “ ipconfig / release .” (Figure A-39) Figure A–39 Step 4. To obtain new IP settings fro m WPD –140, run “ ipconfig / renew .
Page 48 3. For W indows XP If you use Windows XP, follow the steps to verify the IP settings in your client computer. Step 1. Go through the path “Start → Run.”(Figure A-41) Figure A–41 Step 2. En te r command and press the OK button. (Figure A -42) Figure A–42 Step 3.
Page 49 Step 4. To obtain new IP settings from WPD –140, run “ipconfig / renew .” As liste d below, th e IP address is your client computer’s LAN IP address, and the Default Gateway is ZSR0104C SERIES IP address. Make sure that your IP Address is 192.
Page 50 5. For Unix/Linux If you use Unix or Linux, follow the steps to veri fy the IP settings in y our client PC. Step 1. To release the previous IP settings of your computer, run the command “ kill all d hcpcd ”. Step 2. To obtain new IP settings from ZSR0104C SERIES, run the command “ dhcpcd eth# ”.
Page 51 Appendix B: Common Port Numbers Port Number Service Name 7 Echo 11 S y s t a t 19 Chargen 20 (21) FTP 23 TELNET 25 SMTP 37 T ime 49 T ACACS 53 DNS 67(68) BOOTP 69 TFTP 70 Gopher 79 Finger 80 H.
Page 52 Appendix C: T erminology ‧ Auth (TCP Auth e ntication) It implements the Identification Protocol, wh ic h can identify active TCP connections in Linux environment.
Page 53 File T ransfer Protocol enables you to transfer files in a bi-directional method over a TCP/IP network. ‧ Firewall It is a mech anism that protects a n etwork from attacks from the other netw orks. Also, it can provide the Internet access control list that restricts clients’ co nnection to other networks.
Page 54 to a different network or subnet. ‧ IP Address It is a 32-binary digit number that provide s the source or destination information on the Inte rnet. ‧ ISP ( I nternet S ervic e P rovider) It is a company that provides individuals and companies the access to t he Internet.
Page 55 of Ethernet and is co mmonly implemented by xDSL box Internet Service Provider for Dial-Up Internet connections. ‧ PPTP ( P oint to P oint T unneling P rotoc ol) It is a standard VPN protocol that secures a private network with en cryption and authentication o f User ID and Password.
Page 56 T e lnet is a terminal emulation protocol used commonly on the Internet an d TCP/IP network. It enables you to log on to a re mote computer and to run a program on the r emote computer with an established account and password.
An important point after buying a device Zonet Technology ZSR0104C Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zonet Technology ZSR0104C Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zonet Technology ZSR0104C Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zonet Technology ZSR0104C Series you will learn all the available features of the product, as well as information on its operation. The information that you get Zonet Technology ZSR0104C Series will certainly help you make a decision on the purchase.
If you already are a holder of Zonet Technology ZSR0104C Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zonet Technology ZSR0104C Series.
However, one of the most important roles played by the user manual is to help in solving problems with Zonet Technology ZSR0104C Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zonet Technology ZSR0104C Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
