Instruction/ maintenance manual of the product TR2002 Zenoah
Go to page of 16
GB-1 G B BC2003 / TR2002 TR2002 BC2003 G B OWNER’S MANUAL BRUSHCUTTERS 848J5J93A0 (509).
GB-2 BC2003 / TR2002 APPRO V AL NUMBER OF CE EXHA UST EMISSION REGULA TION DIRECTIVE 97/68/EC AMENDED 2002/88/EC e13*97/68SH2G3*2002/88*0109*01 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!!.
GB-3 G B BC2003 / TR2002 SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possib le ser ious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and follo w them without fail.
GB-4 BC2003 / TR2002 1. Par ts location 2. Specification Overall size (L 3 W 3 H) ............................ 1795 x 230 x 303 / 1795 x 340 x 303 mm Dry weight ..........................................................................................
GB-5 G B BC2003 / TR2002 3. W ar ning labels on the machine 4. Symbols on the machine Read owner’ s manual before operat- ing this machine. W ear head, e ye and ear protection. W arning / Attention K eep all children, bystanders and helper s 15 meters awa y from the machine.
GB-6 BC2003 / TR2002 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions.
GB-7 G B BC2003 / TR2002 BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessary , yellow warning rope, warning signs should be placed around the pe- rimeter of the area.
GB-8 BC2003 / TR2002 could result in serious burns or elec- trical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area. Be car eful if you are ap- proached. Injury may result fr om flying debris.
GB-9 G B BC2003 / TR2002 INST ALLING HANDLE • Install the handle to the shaft tube and clamp. INST ALLING DEBRIS GUARD • Attach the guard to the bracket on the main pipe and fix it with 2 screws.
GB-10 BC2003 / TR2002 ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENOAH genuine oil> • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
GB-11 G B BC2003 / TR2002 ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-12 BC2003 / TR2002 TRIMMING GRASS AND WEEDS • Always remember that the TIP of the line does cut- ting. Y ou will achieve better results by not cr owding the line into the cutting area. Allow the unit to trim at its own pace. 1. Hold the unit so the head is off the gr ound and is tilted about 20 degrees towar d the sweep direction.
GB-13 G B BC2003 / TR2002 Every Every Ever y 25 50 100 System/components Procedur e Before hours hours hours Note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filter , f.
GB-14 BC2003 / TR2002 SP ARK PLUG • Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a r e- placement plug, use the correct type specified by KOMA TSU ZENOAH.
GB-15 G B BC2003 / TR2002 3. T ake out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line. 4. Wind up the line in the correct dir ection as indicated on the spool.
GB-16 BC2003 / TR2002 11. T r oubleshooting guide Case 1. Starting failure CHECK PROB ABLE CA USES A CTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is.
An important point after buying a device Zenoah TR2002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah TR2002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah TR2002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah TR2002 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah TR2002 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah TR2002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah TR2002.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah TR2002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah TR2002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
