Instruction/ maintenance manual of the product PSZ2600 Zenoah
Go to page of 16
GB-1 G B PSZ2600 PSZ2600 G B OWNER’S MANUAL POLE SA W 848A5393A2 (806).
GB-2 PSZ2600 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS MODEL 25.4 cm 3 SOUND LEVEL VIBRA TION LEVEL LpA LwA measured 109 dB(A) guaranteed 114 dB(A) ISO 11680 idling 2.
GB-3 G B PSZ2600 SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to pre vent possib le serious bodily injur y , and f or this reason y ou are requested to read all such instructions carefully and f ollow them without f ail.
GB-4 PSZ2600 2. Specification PSZ2600 Overall size (L x W x H) ................ 2085 x 250 x 310mm Dry weight ........................................................... 5.40kg Engine T ype ................... Air -cooled 2-stroke gasoline Model .....
GB-5 G B PSZ2600 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2.
GB-6 PSZ2600 IMPORT ANT Remov e any obstacle bef ore beginning wor k. 4. Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cut- ting attachment is properly installed and securely fastened. 5. Always use the shoulder strap.
GB-7 G B PSZ2600 HANDLING FUEL 1. The engine of the ZENOAH pr oduct is designed to run on a mixed fuel, which contains highly flammable gasoline. Never store cans of fuel or r efill the tank of the un.
GB-8 PSZ2600 MOUNTING ENGINE 1. Push the drive shaft housing toward the clutch housing and r otate it by hand to check that the drive shaft is engaged with the gears. 2. Insert the drive shaft housing into the clutch housing until it bottoms, and align the positioning holes on the clutch housing and the shaft tube and install the screw .
GB-9 G B PSZ2600 ■ FUEL W ARNING • Gasoline is very flammable. A void smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool bef ore refuel- ing the unit. Select outdoor bare gr ound for fueling and move at least 3 m (10 ft) a way fr om the fueling point before starting the engine.
GB-10 PSZ2600 W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap securely . Feed the chain oil into the oil tank and tighten the cap securely , too. (1) Fuel (2) Chain oil 2. Rest the unit on a flat, firm place.
GB-11 G B PSZ2600 STOPPING ENGINE 1. Release the throttle lever and run the engine for half a minute. 2. Shift the ignition switch (a) to the STOP position. IMPORT ANT • Except for an emergency , av oid stopping the engine while pulling the throttle le ver .
GB-12 PSZ2600 IMPORT ANT The oil flow adjusting scre w must be pressed in slightly in order to turn. F ailure to do so could damage the pump and screw .
GB-13 G B PSZ2600 SP ARK PLUG • Starting failure and misfiring ar e often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a r eplacement plug, use the correct type specified by ZENOAH. • REPLA CEMENT PLUG IS A NGK CMR7A.
GB-14 PSZ2600 1. Remove the muffler , insert a scr ewdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time. 2. Tighten all screws, bolts, and fittings.
GB-15 G B PSZ2600 SPROCKET Check for extensive wear , and r eplace it when the teeth are worn over 0.3 mm. (1) Sprock et SA W CHAIN W ARNING It is very important for smooth and safe operation to keep the cutters alwa ys sharp. Y our cutters need to be sharpened when: • Sawdust becomes powder -like.
GB-16 PSZ2600 S hould any failure occur on the pr oduct under normal operating con- ditions within the applicable warranty period, the failed part will be r eplaced or r epaired fr ee of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah PSZ2600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah PSZ2600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah PSZ2600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah PSZ2600 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah PSZ2600 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah PSZ2600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah PSZ2600.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah PSZ2600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah PSZ2600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
