Instruction/ maintenance manual of the product G500AVS Zenoah
Go to page of 15
G455A VS / G500A VS G B GB-1 G455AVS G500AVS OWNER’S MANUAL CHAIN SA W G B 848C8193A4 (806).
G455A VS / G500A VS GB-2 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS Read operator's instruction book before operating this machine. W ear head, ey e and ear protection. Use the chain saw with two hands. Wa r ning! Danger of kickback. Read, understand and follow all warnings.
G455A VS / G500A VS G B GB-3 Contents 1. For Safe Operation ................................................................... 4 2. Explanation of Symbols on the Machine .................................. 6 3. Installing Guide Bar and Saw Chain .....
G455A VS / G500A VS GB-4 1. For safe operation 1. Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medica- tion that may make you drowsy , or if you are under the influence of alcohol or drugs. 2. Use safety footwear , snug fitting clothing and eye, hearing and head protection devices.
G455A VS / G500A VS G B GB-5 17. Use extreme caution when cut- ting small size brush and sap- lings because slender material may catch the saw chain and be whipped toward you or pull you off balance.
G455A VS / G500A VS GB-6 2. Explanation of Symbols on the Machine W ARNING • For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make any mistake. The screw under the “H” stamp is The High-speed adjustment scr ew .
G455A VS / G500A VS G B GB-7 Power unit Bar protector Guide bar Saw chain Plug wrench Screwdriver for carburetor adjustment 5. Fit the chain cover to the power unit and fasten the nuts to finger tightness.
G455A VS / G500A VS GB-8 4. Fuel and Chain Oil ■ FUEL W ARNING • Gasoline is very flammable. A void smoking or bringing any flame or sparks near fuel.
G455A VS / G500A VS G B GB-9 W ARNING •K eep clear of the sa w chain as it will start r otating upon starting of engine . ■ CHECKING THE OIL SUPPL Y W ARNING • Make sure to set up the bar and the chain when c hec king the oil supply . If not, the r otating parts may be e xposed.
G455A VS / G500A VS GB-10 ■ ST OPPING THE ENGINE 1. Release the throttle lever to allow the engine to idle for a few minutes. 2. Set the switch to the “O” (STOP) position.
G455A VS / G500A VS G B GB-11 6. Sawing • Before pr oceeding to y our job, read the section “For Safe Op- eration”. It is recommended to first practice sa wing easy logs. This also helps you get accus- tomed to your unit. •A lwa ys follow the saf ety regu- lations.
G455A VS / G500A VS GB-12 W ARNING • Before c leaning, the inspecting or repairing the unit, make sure that engine has stopped and is cool. Dis- connect the spark plug to prevent accidental starting. ■ MAINTENANCE AFTER EA CH USE 1. Air filter Dust on the cleaner surface can be removed by tapping a corner of the cleaner against a hard surface.
G455A VS / G500A VS G B GB-13 Place the file on the cutter and push straight forward. Keep the file position as illustrated. After each cutter has been filed, check the depth gauge and file it to the proper level as illustrated. 4. Spark plug Clean the electrodes with a wir e brush and reset the gap to 0.
G455A VS / G500A VS GB-14 W ARNING • This saw is equipped with one of the f ollowing lo w kickbac k bar/chain combinations: Zenoah Part Number Bar Size Guide Bar Saw Chain 14 3644-52112 3611-52210 (21BP) 16 3645-52113 3612-52210 (21BP) 18 3646-52113 3646-52210 (21BP) • The bar rail should always be square.
G455A VS / G500A VS G B GB-15 10. Specifications Po wer unit: Displacement (cm 3 ): G455A VS ............................................................ 45.0 G500A VS ............................................................ 49.3 Fuel: ...........
An important point after buying a device Zenoah G500AVS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah G500AVS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah G500AVS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah G500AVS you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah G500AVS will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah G500AVS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah G500AVS.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah G500AVS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah G500AVS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
