Instruction/ maintenance manual of the product BK2651DL Zenoah
Go to page of 16
GB-1 G B BK2651DL BK2651DL G B OWNER’S MANUAL BRUSHCUTTER 848EFT93A1 (704).
GB-2 BK2651DL EC DECLARA TION OF COMFORMITY We, ZENO AH CO ., L TD. 1-9, Minamidai, Kawagoe, Saitama, Japan declare in sole responsibility that the following pr oducts referr ed to in this declaration conform with DIRECTIVE 89/336/EEC, 98/37/EC EN ISO 11806, ISO 14865 : 1997 2000/14/EC Internal contr ol production.
GB-3 G B BK2651DL 1. Par ts location SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to pre vent possib le ser ious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail.
GB-4 BK2651DL Model BK2651DL Overall size (LxWxH) mm 2621 x 414 x 330 Dry weight kg 8.3 Engine Model Zenoah G26LS Displacement cm 3 25.4 Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Carburetor Diaphragm type Ignition system Flywheel magneto (C.
GB-5 G B BK2651DL 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise.
GB-6 BK2651DL ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine.
GB-7 G B BK2651DL • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
GB-8 BK2651DL 6. Set up INST ALLING THE SHOULDER STRAP 1. Hook the upper part of the shoulder strap at the notch on the top of the frame and pass it through the buckle as shown in the Figure, then secur e it firmly . 2. Put the hook at the lower part of the shoulder strap in the strap installing location at the bottom of the frame.
GB-9 G B BK2651DL ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENO AH genuine oil) • Exhaust emission are contr olled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion.
GB-10 BK2651DL IMPORT ANT • Overchoking may make the engine har d to start due to excess fuel. If the engine fails to start after several attempts, open the choke and repeatedly pull the r ope, or remove the spark plug and dry it befor e tr ying again.
GB-11 G B BK2651DL NOTE • This brush cutter can be operated in either the right side or left side position. The rope guide position is fixed for right side position operation when shipped from the factory .
GB-12 BK2651DL 8. Operation PUTTING ON THE UNIT NOTE • When carrying the unit on the back, make sure that the throttle lever is set to the idling position and that the throttle wir e will not become twisted and tensioned.
GB-13 G B BK2651DL 9. Maintenance Every Every Ever y 25 50 100 System/components Procedure Before hours hours hours Note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air fil.
GB-14 BK2651DL 9. Maintenance 9. Maintenance (1) Fuel filter (1) Stopper (2) Flexible liner (3) Gear case (4) Inner shaft (1) Air filter W ARNING • Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a per sonal injury .
GB-15 G B BK2651DL INT AKE AIR COOLING VENT W ARNING • Never touch the c ylinder , muffler , or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.
GB-16 BK2651DL Limited warranty Should any failure occur on the pr oduct under normal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah BK2651DL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BK2651DL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BK2651DL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BK2651DL you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BK2651DL will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BK2651DL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BK2651DL.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BK2651DL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BK2651DL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
