Instruction/ maintenance manual of the product BCZ3200DW Zenoah
Go to page of 16
GB-1 G B BCZ3200DL / BCZ3200DW BCZ3200DL BCZ3200D W G B OWNER’S MANUAL BRUSHCUTTERS 848JCG93A0 (511).
GB-2 BCZ3200DL / BCZ3200DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF D AMA GING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.
GB-3 G B BCZ3200DL / BCZ3200DW SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possible serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and follo w them without fail.
GB-4 BCZ3200DL / BCZ3200DW 2. Specification BCZ3200DL / BCZ3200D W Overall size (L 3 W 3 H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight ...............................................................................
GB-5 G B BCZ3200DL / BCZ3200DW b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area.
GB-6 BCZ3200DL / BCZ3200DW BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m (50 ft) of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessary , yellow warning rope, warning signs should be placed around the perimeter of the area.
GB-7 G B BCZ3200DL / BCZ3200DW eration or immediately after shutting down the engine. Doing so could re- sult in serious burns or electrical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
GB-8 BCZ3200DL / BCZ3200DW INST ALLING HANDLE (BCZ3200DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BCZ3200DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally .
GB-9 G B BCZ3200DL / BCZ3200DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENO AH genuine oil> • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
GB-10 BCZ3200DL / BCZ3200DW ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-11 G B BCZ3200DL / BCZ3200DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle speed adjuster 1.
GB-12 BCZ3200DL / BCZ3200DW W ARNING CONTROLLING BLADE BOUNCE • Blade thrust can cause serious personal injury . Care- fully study this section. It is important that you under - stand what causes blade thrust, how you can reduce the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur .
GB-13 G B BCZ3200DL / BCZ3200DW 8. Operation 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth. 4. Never swing the unit so hard as you ar e in danger of losing your balance or control of the unit.
GB-14 BCZ3200DL / BCZ3200DW W ARNING • Make sure that the engine has stopped and is cool before perf orming any service to the machine. Con- tact with moving cutting head or hot m uffler may result in a personal injury . AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance.
GB-15 G B BCZ3200DL / BCZ3200DW that it is necessary to remove the engine cover shown in in or der to be able to vie w the upper part of the cylinder .
GB-16 BCZ3200DL / BCZ3200DW 12. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter.
An important point after buying a device Zenoah BCZ3200DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BCZ3200DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BCZ3200DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BCZ3200DW you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BCZ3200DW will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BCZ3200DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BCZ3200DW.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BCZ3200DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BCZ3200DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
