Instruction/ maintenance manual of the product BCZ3000DW Zenoah
Go to page of 16
GB-1 G B BCZ3000DL / BCZ3000DW BCZ3000DL BCZ3000DW G B OWNER’S MANUAL BRUSHCUTTERS 848JC293A0 (311).
GB-2 BCZ3000DL / BCZ3000DW EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS W ARNING!!! RISK OF DAMAGING HEARING IN NORMAL CONDITIONS OF USE, THIS MACHINE MA Y INVOL VE A DAIL Y LEVEL OF PERSONAL EXPOSURE TO NOISE FOR THE OPERA TOR EQUAL TO OR GREA TER THAN 85 dB(A) 29.
GB-3 G B BCZ3000DL / BCZ3000DW SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail.
GB-4 BCZ3000DL / BCZ3000DW 2. Specification BCZ3000DL / BCZ3000DW Overall size (L W H) ............................. 1860 x 395 x 325 / 1860 x 610 x 520 mm Dry weight ............................................................................
GB-5 G B BCZ3000DL / BCZ3000DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise.
GB-6 BCZ3000DL / BCZ3000DW ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine.
GB-7 G B BCZ3000DL / BCZ3000DW could result in serious burns or elec- trical shock. • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached.
GB-8 BCZ3000DL / BCZ3000DW INST ALLING HANDLE (BC3000DL) • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. INST ALLING HANDLE (BC3000DW) 1. Loosen the 4bolts on the upper cap and insert the handles equally .
GB-9 G B BCZ3000DL / BCZ3000DW ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion.
GB-10 BCZ3000DL / BCZ3000DW ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-11 G B BCZ3000DL / BCZ3000DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1.
GB-12 BCZ3000DL / BCZ3000DW W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injury . Car efully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur .
GB-13 G B BCZ3000DL / BCZ3000DW 2. Y ou can avoid thrown debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth.
GB-14 BCZ3000DL / BCZ3000DW AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dr y completely before in- stalling. If the element is broken or shrunk, r eplace with a new one.
GB-15 G B BCZ3000DL / BCZ3000DW IMPORT ANT • Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.
GB-16 BCZ3000DL / BCZ3000DW 11. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter.
An important point after buying a device Zenoah BCZ3000DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BCZ3000DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BCZ3000DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BCZ3000DW you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BCZ3000DW will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BCZ3000DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BCZ3000DW.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BCZ3000DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BCZ3000DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
