Instruction/ maintenance manual of the product BCZ2602DL Zenoah
Go to page of 16
GB-1 G B BCZ2602DL BCZ2602DL G B OWNER’S MANUAL BRUSHCUTTERS 848JA193A3 (708).
GB-2 BCZ2602DL EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS ZENOAH CO., L TD. Masahiko GOUDA 1st April 2007 W ARNING!!! RISK OF DAMAGING HEARING Wear head, eye and ear protection. guaranteed 108 dB(A) measured 106.47 dB(A) MODEL 25.4 cm 3 SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA ISO 7916 idling 5.
GB-3 G B BCZ2602DL SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail.
GB-4 BCZ2602DL 2. Specification Overall size (L 3 W 3 H ) ........................................................... 1830 x 400 x 365 mm Dry weight ......................................................................................................
GB-5 G B BCZ2602DL 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions.
GB-6 BCZ2602DL 5. For safe operation part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the throttle into the high-speed position when starting the engine.
GB-7 G B BCZ2602DL • IF SOMEONE COMES 1. Guard against hazardous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
GB-8 BCZ2602DL BLADE 1. Put the angled bar into the side holes of the inner holder and the gearcase. 2. Remove the blade bolt (Lefthanded) and the outer holder from the gearshaft. 3. Put the blade onto the inner holder . Make the marked side face the holder .
GB-9 G B BCZ2602DL ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustion.
GB-10 BCZ2602DL ST AR TING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-11 G B BCZ2602DL ADJUSTING THROTTLE CABLE • The nor mal play is 1 or 2 mm when measur ed at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop fr equently at idling mode, turn the adjusting screw clockwise.
GB-12 BCZ2602DL W ARNING CONTROLLING BLADE BOUNCE • Kick out can cause serious personal injur y . Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur .
GB-13 G B BCZ2602DL 2. Y ou can avoid thr own debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy gr owth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth.
GB-14 BCZ2602DL AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dr y completely before in- stalling. If the element is broken or shrunk, r eplace with a new one.
GB-15 G B BCZ2602DL IMPORT ANT • Note that using any spark plug other than those desig- nated may result in the engine failing to operate properly or in the engine becoming overheated and damaged. • T o install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.
GB-16 BCZ2602DL 12. T r oubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged .
An important point after buying a device Zenoah BCZ2602DL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BCZ2602DL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BCZ2602DL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BCZ2602DL you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BCZ2602DL will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BCZ2602DL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BCZ2602DL.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BCZ2602DL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BCZ2602DL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
