Instruction/ maintenance manual of the product BC4500DW Zenoah
Go to page of 12
848JG493A0 (712) Owner’ s manual Brushcutters BC4500DW Thank you for purchasing a Husqvarna Zenoah product. Before using our brushcutter, please read this manual carefully to understand the proper use of your unit. Gracias por comprar este producto Husqvarna Zenoah.
2. For safe operation 2. Para un Funcionamiento Seguro English Español 1. Read this manual carefully until you completely understand and can follow all safety notes, precautions, and operating instructions before using of the unit. 2. Do not operate this tool when you are tired, ill, or under the influence of alchohol, drugs, or medication.
3 the unit where footing is unsteady or slippery. 13.Keep cutting attachment below waist level. 14.Keep all parts of your body away from the rotating cutting attachment and hot surfaces. 15.Warn the operator of the danger of blade thrust. (Kick back) Blade thrust may occur when the spinning blade contacts a solid object in the critical area.
4 English Español 3. Setup 3. Montaje ■ ENGINE Using attached 4 socket screws, secure the connection firmly with equal force. ■ HANDLE 1. Remove the upper cap from the bracket. 2. Loosen the 4 bolts on the clamp and insert the handles equally. Retighten the bolts.
5 English Español 4. Fuel 4. Combustible • Keep open flames away from the area where fuel is handled or stored. • Mix and store fuel only in an approved gasoline container. Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a quality- proven motor oil for air cooled 2 cycle engines.
6 English Español 5. Use 5. Funcionamiento ■ STARTING THE ENGINE Take care that the cutting head will start rotating upon the engine starts. 1. Push the primer pump(1) several times until overflown fuel flows out in the clear tube. (F5-1) 2. Move the choke lever(2) to the closed position.
7 English Español 5. Use 5. Funcionamiento nut loose. ■ CUTTING WORK • By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground. • Choose a suitable recommended cutting attachment according to the object to be cut.
8 English Español 6. Maintenance 6. Mantenimiento Before cleaning, inspecting, or repairing the unit, make sure that the engine has stopped and is cool. ■ BLADE Check the blade and the fasteners for looseness, cracking, or bending. ■ AIR FILTER A clogged air filter will reduce the engine performance.
9 English Español 6. Maintenance 6. Mantenimiento ■ MAINTENANCE BEFORE STORAGE • Old fuel left in the carburetor may cause starting failure. When a series of operation finished, make sure to empty the fuel tank and drain the carburetor. • Check all parts and the functions.
10 English 7. Specifications MODEL CODE Unit BC4500DW NOTE Overall size Length mm 1860 Width mm 630 Height mm 510 Dry Weight Kg 7.3 Engine Model G45L-D Displacement cc 41.5 Carburetor Diaphragm Fuel (Mixture ratio) 25:1 (Gasoline and 2cycle oil) Fuel Tank capacity litter 0.
11 Español 7. Especificaciones Modelo Unidad BC4500DW NOTA Tamaño total Longitud mm 1860 Anchura mm 630 Altura mm 510 Peso en seco Kgf 7,3 Modelo del motor G45L-D Desplazamiento cm 3 41,5 Carburador.
Head Office: 1-9, Minamidai, Kawagoe-city , Saitama, 350-1 165 Japan T elephone: (+81)49-243-1 1 17 T elecopier: (+81)49-243-7197.
An important point after buying a device Zenoah BC4500DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BC4500DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BC4500DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BC4500DW you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BC4500DW will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BC4500DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BC4500DW.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BC4500DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BC4500DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
