Instruction/ maintenance manual of the product BC4301DLM Zenoah
Go to page of 14
T31 15-93120(201) BRUSHCUTTERS January 2002 APPLICABLE SERIAL NUMBERS: NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
Fig.1 CUTTER GROUP BC3401DLM.
1 4050-11110 HOUSING 1 2 4050-11150 CAP 1 3 4050-11210 JOINT 1 4 4050-11250 ABSORBER-F 1 5 4050-11260 ABSORBER-R 1 6 01252-30530 BOLT 4 7 01252-30630 BOLT 1 8 01252-30510 BOLT 1 9 T3113-11310 DRUM 1 1.
Fig.2 CUTTER GROUP BC3401DWM.
1 4050-11110 HOUSING 1 2 4050-11150 CAP 1 3 4050-11210 JOINT 1 4 4050-11250 ABSORBER-F 1 5 4050-11260 ABSORBER-R 1 6 01252-30530 BOLT 4 7 01252-30630 BOLT 1 8 01252-30510 BOLT 1 9 T3113-11310 DRUM 1 1.
Fig.3 ENGINE GROUP BC3401DLM/BC3401DWM.
1 4700-12110 CYLINDER 1 2 1850-12130 BOLT 4 M5x20 3 4500-13120 GASKET, base 1 4 4500-21101 CRANKCASE COMP. 1 5 2629-21130 • PIN 3 6 4500-21140 GASKET, case 1 7 06030-06201 BEARING 2 8 4810-21210 OIL.
Fig.4 CUTTER GROUP BC4301DLM.
1 4050-11110 HOUSING 1 2 4050-11150 CAP 1 3 T3042-11210 JOINT 1 4 4050-11250 ABSORBER-F 1 5 4050-11260 ABSORBER-R 1 6 01252-30530 BOLT 4 7 01252-30630 BOLT 1 8 01252-30510 BOLT 1 9 4050-11311 DRUM 1 1.
Fig.5 CUTTER GROUP BC4301DWM.
1 4050-11110 HOUSING 1 2 4050-11150 CAP 1 3 T3042-11210 JOINT 1 4 4050-11250 ABSORBER-F 1 5 4050-11260 ABSORBER-R 1 6 01252-30530 BOLT 4 7 01252-30630 BOLT 1 8 01252-30510 BOLT 1 9 4050-11311 DRUM 1 1.
Fig.6 ENGINE GROUP BC4301DLM/BC4301DWM.
1 4500-12110 CYLINDER 1 2 1850-12130 BOLT 4 M5x20 3 4500-13120 GASKET, base 1 4 4500-21101 CRANKCASE COMP. 1 5 2629-21130 • PIN 3 6 4500-21140 GASKET, case 1 7 06030-06201 BEARING 2 8 4810-21210 OIL.
1-9 Minamidai, Kawagoe, Saitama, 350-1 192 Japan PRINTED IN JAPAN PRINTED ON RECYCLED PAPER IMPRIMÉ SUR PAPIER RECYCLÉ GEDRUCKT AUF RECYCLING PAPIER STAMPATO SU CARTA RICICLATA IMPRESO EN PAPEL RECI.
An important point after buying a device Zenoah BC4301DLM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BC4301DLM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BC4301DLM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BC4301DLM you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BC4301DLM will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BC4301DLM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BC4301DLM.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BC4301DLM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BC4301DLM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
