Instruction/ maintenance manual of the product BC2604DL Zenoah
Go to page of 16
GB-1 G B BC2604DL / BC2604DW BC2604DL BC2604DW G B OWNER’S MANUAL BRUSHCUTTERS 848JB593A1 (704).
BC2604DL / BC2604DW GB-2 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS APPRO V AL NUMBER OF CE EXHA UST EMISSION REGULA TION DIRECTIVE 97/68/EC AMENDED 2002/88/EC e13*97/68SH2G3*2002/88*0104*03 MODEL SOUND LEVEL VIBRA TION LEVEL EN 27917 ISO 10884 ISO 7916 L pAav L WA (guaranteed) idling racing BC2604DL 25.
GB-3 G B BC2604DL / BC2604DW SAFETY FIRST Instructions contained in warnings within this manual mar ked with a symbol concern cr itical points which must be taken into consideration to pre vent possib le serious bodily injur y , and f or this reason y ou are requested to read all such instructions carefully and follo w them without f ail.
BC2604DL / BC2604DW GB-4 2. Specification BC2604DL / BC2604DW Overall size (L 3 W 3 H) ............................ 1800 x 395 x 315 / 1800 x 610 x 520 mm Dry weight .....................................................................................
GB-5 G B BC2604DL / BC2604DW 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later when- ever any questions arise.
BC2604DL / BC2604DW GB-6 ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. W ARNING Never place the thr ottle into the high-speed position when starting the engine.
GB-7 G B BC2604DL / BC2604DW • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
BC2604DL / BC2604DW GB-8 INST ALLING DEBRIS GUARD FOR LINE HEAD • Attach the debris guard (RED) with the bolts pr ovided. INST ALLING LINE HEAD 1. While locking the gear shaft by inserting the supplied tool into the upper holder on the gear box, loosen and remove the bolt (left-handed).
GB-9 G B BC2604DL / BC2604DW 7. Fuel ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 <when using ZENOAH genuine oil> • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
BC2604DL / BC2604DW GB-10 ST ARTING ENGINE W ARNING The cutting head will start rotating upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surrounding objects, as it will start rotating upon starting of the engine.
GB-11 G B BC2604DL / BC2604DW ADJUSTING THROTTLE CABLE • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as requir ed. (1) Cable adjuster ADJUSTING IDLING SPEED (1) Idle adjusting screw 1. When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.
BC2604DL / BC2604DW GB-12 W ARNING CONTROLLING BLADE BOUNCE •K ick out can cause serious personal injury . Carefully study this section. It is important that you understand what causes kick out, how you can reduce the chance of kick out and how you can remain in contr ol of the unit if kick out does occur .
GB-13 G B BC2604DL / BC2604DW 2. Y ou can avoid thrown debris by sweeping from your left to the right. 3. Use a slow , deliberate action to cut heavy growth. The rate of cutting motion will depend on the material being cut. Heavy growth will r equire slower action than will light growth.
BC2604DL / BC2604DW GB-14 AIR FIL TER • The air filter , if clogged, will reduce the engine perfor - mance. Check and clean the filter element in warm, soapy water as requir ed. Dry completely before in- stalling. If the element is broken or shrunk, r eplace with a new one.
GB-15 G B BC2604DL / BC2604DW IMPORT ANT • Note that using any spark plug other than those des- ignated ma y result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged.
BC2604DL / BC2604DW GB-16 Limited warranty Should any failure occur on the pr oduct under normal oper - ating conditions within the applicable warranty period, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer .
An important point after buying a device Zenoah BC2604DL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BC2604DL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BC2604DL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BC2604DL you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BC2604DL will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BC2604DL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BC2604DL.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BC2604DL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BC2604DL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
