Instruction/ maintenance manual of the product TCS 675 EW Zanussi
Go to page of 19
TUMBLE DR YER TCS 675 EW X TRA C APACITY DOOR OPEN ON-OFF CONDENSER DRYER ELECTRONIC SENSOR A EXTRA DRY B STORE DRY C LIGHTLY DAMP D IRON DRY E MACHINE IRON DRY F EXTRA DRY G STORE DRY H LIGHTLY DAMP COTTON SYNTHETICS H T C S 6 7 5 E W LOW TEMP. START BUZZER OFF IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE LOW TEMP.
2 Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
3 F or the User Important Safety Infor mation 2 ■ Installation 2 ■ Child Safety 2 ■ Use 2 Y our New Tumble Dryer 4 Description of the Appliance 4 The Control Panel 5 ■ W ater reservoir 5 ■ M.
4 Description of the Appliance This tumble dryer will give your wash that soft, relaxed feel whatever the weather . Extremely high quality standards both during development and manufacturing guarantee a long service life for your appliance.
5 X TRA C APACITY DOOR OPEN ON-OFF CONDENSER DRYER ELECTRONIC SENSOR A EXTRA DRY B STORE DRY C LIGHTL Y DAMP D IRON DRY E MACHINE IRON DRY F EXTRA DRY G STORE DRY H LIGHTL Y DAMP COTTON SYNTHETICS H T C S 6 7 5 EW LOW TEMP . START BUZZER OFF LOW TEMP .
6 11 “Dr ying” Light This light indicates that the machine is performing the drying phase. 12 “Cooling” Light This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry .
7 Electr onic Contr olled Pr ogr ammes T ype of laundry: Cotton & linen Degree of drying requir ed Extra dry Store dry Lightly damp 6A B(*) C 6 6 Iron dry D(*) 6 Machine iron dry E 6 Extra dry Synthetics F 2.5 Lightly damp H 2.5 Store dry G(*) 2.5 Max.
8 Before using your tumble dryer for the first time, we recommend you place a few damp cloths inside the appliance and dry for approximately 30 minutes. There may be dust inside a brand new tumble dryer . 1. Load the laundr y Open the door by pressing the relevant button.
9 Anticr ease phase If you do not remove the laundry at the end of the programme, the machine will automatically carry out an “anticrease” phase for approx 30 mins.
10 Before placing articles of laundry in your tumble dryer , check the care labels to ensure they are recommended for tumble drying. Care Labels you may find on your laundry normal drying (high temperature) delicate drying (low temperature) do not tumble dry may be tumble dried Do not overload the appliance.
11 Y ou must disconnect the appliance from the electricity supply , befor e you can carry out any cleaning or maintenance work. External cleaning Use only soap and water and then dry thoroughly . From time to time, apply a little wax furniture cream with a soft cloth.
12 The tumble dryer does not start ■ The door has not been closed. ■ The plug is not properly inserted in the power socket. ■ There is no current at the socket. ■ The main fuse or the fuse in the plug has blown. ■ The ON-OFF button has not been pressed.
13 Guarantee Conditions Standar d guar antee conditions W e, Zanussi undertake that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defecti.
14 To contact your local Ser vice Force Centre telephone 08705 929 929 125994650.qxd 09/05/01 16.02 Pagina 14 (Nero/Process Black pellicola).
15 To contact your local Ser vice Force Centre telephone 08705 929 929 125994650.qxd 09/05/01 16.02 Pagina 15 (Nero/Process Black pellicola).
16 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
17 Positioning It is recommended that, for your convenience, the dryer is positioned close to your washing machine. The tumble dryer must be installed in a clean place, where dirt does not build up. Air must be able to circulate freely all round the appliance.
18 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed.
From the Electr olux Group. The world’ s No . 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
An important point after buying a device Zanussi TCS 675 EW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi TCS 675 EW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi TCS 675 EW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi TCS 675 EW you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi TCS 675 EW will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi TCS 675 EW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi TCS 675 EW.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi TCS 675 EW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi TCS 675 EW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center