Instruction/ maintenance manual of the product DC68-02033B-03 Maytag
Go to page of 13
1 DC68-02033B-03 AUT OMA TIC DR YER INST ALLA TION INSTRUCTIONS MISE EN SER VICE SÉCHEUSE AUT OMA TIQUE INSTRUCCIONES DE INST ALACIÓN DE LA SECADORA AUT OMÁTICA The installation, including a proper exhaust system, is the responsibility of the owner .
2 Note: The height of the dryer from top to floor is 38" with the leveling leg screwed all the way in. The customer can unscrew the leg out an additional 78" for a total overall height of 38 7/8".
3 IMPORT ANT T O INST ALLER Please Read The Following Instructions Carefully Before Starting T o Install The Dryer . These Instructions Should Be Retained For Future Reference. REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES SUCH AS DR YERS TO A VOID THE DANGER OF A CHILD SUFFOCA TING.
4 EXHAUSTING Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the room. In the United States: • All dryers must be exhausted to the outside. • Only rigid or flexible metal duct should be used for exhausting.
5 • Exhaust systems longer than recommended can extend drying times, affect machine operation and may collect lint. • The exhaust duct should end with an exhaust hood with a swing out damper to prevent back drafts and entry of wildlife. Never use an exhaust hood with a magnetic damper .
GAS REQUIREMENTS Use only Natural or LP (liquid propane) gases. THE INST ALLA TION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NA TIONAL FUEL GAS CODE ANSI/Z223.1, LA TEST REVISION (FOR THE UNITED ST A T ES), OR WITH THE CAN/CGA-B149 INST ALLA TION CODES (FOR CANADA).
7 GROUNDING This dryer must be grounded. In the event of malfunction or breakdown, the ground will reduce the risk of electrical shock by providing a path of least resistance for electrical current. GAS MODELS This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.
8 • If a power cord is used, the cord should be plugged into a 30-ampere receptacle. • The power cord is NOT provided with U.S. electric model dryers. IMPORT ANT : When permitted by local codes, the dryer electrical supply may be connected by means of a new power supply cord kit, marked for use with clothes dryer , that is U.
9 INST ALLA TION Parts and literature are packaged inside of dryer drum. T o Install... 1. Move dryer to an appropriate location for installation. Consider installing the dryer before the washer in side-by-side installations, to allow access to gas, electrical and exhaust connections.
10 3-WIRE SYSTEM CONNECTIONS 1. Loosen or remove center terminal block screw . 2. Connect neutral wire (white or center wire) of power supply cord to the center , silver colored terminal screw of the terminal block. T ighten screw . 3. Connect the other wires to outer terminal block screws.
11 FINAL INST ALLA TION CHECK LIST ■ Dryer is plugged into electrical outlet and is properly grounded. ■ Exhaust duct work is hooked up and joints taped. ■ Plastic flexible duct is NOT used. ■ Use rigid or stiff walled flexible metal vent material.
12 ADDITIONAL INSTRUCTIONS FOR EXPORT MODELS (Not U.S. Mexico, or Canada) Contact the distributor that sold the appliance or: Maytag International, 1475 East Woodfield Road Schaumburg, Illinois 60173 Phone: 847-273-3100, for information on product, shipping damage, replacement parts and accessories.
13 1. Disconnect power supply to unit. 2. Remove 2 screws on door hinge. 3. Lift the door and remove from dryer . 4. Remove 2 screws on opposite side of door hinge. 5.Remove 2 screws on holder lever . 6. Locate door at the other side and reassemble door to dryer .
An important point after buying a device Maytag DC68-02033B-03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maytag DC68-02033B-03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maytag DC68-02033B-03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maytag DC68-02033B-03 you will learn all the available features of the product, as well as information on its operation. The information that you get Maytag DC68-02033B-03 will certainly help you make a decision on the purchase.
If you already are a holder of Maytag DC68-02033B-03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maytag DC68-02033B-03.
However, one of the most important roles played by the user manual is to help in solving problems with Maytag DC68-02033B-03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maytag DC68-02033B-03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
